Failed
gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa.iperf3.py (from gprs_trx-lms-limenet-micro+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=22539): Process ended prematurely: osmo-stp_10.42.42.5(pid=22539) [trial-2372↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22539)]
Standard Output
---------------------------------------------- trial-2372 gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa iperf3.py ---------------------------------------------- 09:19:05.782607 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:19:05.794335 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 09:19:05.957425 tst iperf3.py: using LAC 27395 09:19:06.083668 tst iperf3.py: using RAC 110 09:19:06.210596 tst iperf3.py: using CellId 27395 09:19:06.332918 tst iperf3.py: using BVCI 27396 09:19:06.356228 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:19:06.367326 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:19:06.378145 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:19:06.389319 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:19:06.400323 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:19:06.411375 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:19:06.422557 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:19:06.433521 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:19:06.444704 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 09:19:06.725380 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 09:19:06.852169 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:19:07.165688 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22531): Launched 09:19:07.425575 run iperf3-srv_10.42.42.10(pid=22532): Launched 09:19:07.612100 tst iperf3.py:8: start network... 09:19:07.738926 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:19:08.214869 run create_hlr_db(pid=22533): Launched 09:19:08.389413 bus /gobi_6: Setting Powered False 09:19:09.411038 run create_hlr_db(pid=22533): Terminated: ok {rc=0} 09:19:09.813917 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22535): Launched 09:19:10.116822 run osmo-hlr_10.42.42.2(pid=22536): Launched 09:19:10.232489 run osmo-stp_10.42.42.5: Starting osmo-stp 09:19:10.763317 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22538): Launched 09:19:11.066602 run osmo-stp_10.42.42.5(pid=22539): Launched 09:19:11.178411 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:19:11.705409 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22541): Launched 09:19:11.814375 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:19:12.082139 run patchelf(pid=22542): Launched 09:19:12.259572 run osmo-stp_10.42.42.5(pid=22539): ERR: Terminated: ERROR {rc=1} [trial-2372↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22539)] 09:19:12.389266 run osmo-stp_10.42.42.5(pid=22539): stdout: | (launched: 2022-12-10_09:19:10.916925) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:19:12.519694 run osmo-stp_10.42.42.5(pid=22539): stderr: | �[0;m�[38;5;43m20221210091911089 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210091911089 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210091911089 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210091911090 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210091911090 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210091911090 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210091911090 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:19:12.645554 run osmo-stp_10.42.42.5(pid=22539): stdout: | (launched: 2022-12-10_09:19:10.916925) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:19:12.770479 run osmo-stp_10.42.42.5(pid=22539): stderr: | �[0;m�[38;5;43m20221210091911089 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210091911089 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210091911089 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210091911090 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210091911090 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210091911090 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210091911090 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:19:12.915341 run patchelf(pid=22542): Terminating (SIGINT) 09:19:13.086096 run patchelf(pid=22542): Terminated: ok {rc=0} 09:19:13.117713 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=22539): Process ended prematurely: osmo-stp_10.42.42.5(pid=22539) [trial-2372↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22539)] [trial-2372↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪iperf3.py:8] 09:19:13.126987 tst iperf3.py:8: Test FAILED (7.4 sec) 09:19:13.187570 run osmo-hlr_10.42.42.2(pid=22536): ERR: Terminated: ERROR {rc=237} [trial-2372↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22536)] 09:19:13.236425 run osmo-hlr_10.42.42.2(pid=22536): stdout: | (launched: 2022-12-10_09:19:09.967472) 09:19:13.285498 run osmo-hlr_10.42.42.2(pid=22536): stderr: | �[0;m�[1;31m20221210091910144 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210091910144 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210091910144 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210091910144 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210091910144 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210091910144 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210091910155 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2372/run.2022-12-10_08-20-36/gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210091910164 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210091910164 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210091910164 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:19:13.327643 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22531): Terminating (SIGTERM) 09:19:13.367560 run iperf3-srv_10.42.42.10(pid=22532): Terminating (SIGTERM) 09:19:13.407011 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22535): Terminating (SIGTERM) 09:19:13.446627 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22538): Terminating (SIGTERM) 09:19:13.486227 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22541): Terminating (SIGTERM) 09:19:13.495646 --- ParallelTerminationStrategy: PID 22531 died... 09:19:13.548783 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22531): Terminated: ok {rc=0} 09:19:13.558704 --- ParallelTerminationStrategy: PID 22532 died... 09:19:13.611107 run iperf3-srv_10.42.42.10(pid=22532): Terminated {rc=256} 09:19:13.620791 --- ParallelTerminationStrategy: PID 22535 died... 09:19:13.673306 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22535): Terminated: ok {rc=0} 09:19:13.682780 --- ParallelTerminationStrategy: PID 22538 died... 09:19:13.735144 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22538): Terminated: ok {rc=0} 09:19:13.744788 --- ParallelTerminationStrategy: PID 22541 died... 09:19:13.796934 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22541): Terminated: ok {rc=0} 09:19:13.880157 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22539): Process ended prematurely: osmo-stp_10.42.42.5(pid=22539) [trial-2372↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22539)]