Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=19942): Process ended prematurely: osmo-stp_10.42.42.5(pid=19942) [trial-2372↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19942)]
Standard Output
---------------------------------------------- trial-2372 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa iperf3.py ---------------------------------------------- 08:54:06.672748 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:54:06.684814 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 08:54:06.853083 tst iperf3.py: using LAC 27262 08:54:06.980040 tst iperf3.py: using RAC 232 08:54:07.106665 tst iperf3.py: using CellId 27262 08:54:07.233991 tst iperf3.py: using BVCI 27263 08:54:07.258820 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:54:07.270246 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:54:07.281495 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:54:07.292613 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:54:07.303826 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:54:07.315102 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:54:07.326445 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:54:07.337557 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:54:07.348884 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 08:54:07.645504 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 08:54:07.780393 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:54:08.112111 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19934): Launched 08:54:08.387678 run iperf3-srv_10.42.42.10(pid=19935): Launched 08:54:08.585967 tst iperf3.py:8: start network... 08:54:08.720800 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:54:09.238318 run create_hlr_db(pid=19936): Launched 08:54:09.425494 bus /gobi_6: Setting Powered False 08:54:10.446543 run create_hlr_db(pid=19936): Terminated: ok {rc=0} 08:54:10.854684 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19938): Launched 08:54:11.160083 run osmo-hlr_10.42.42.2(pid=19939): Launched 08:54:11.279694 run osmo-stp_10.42.42.5: Starting osmo-stp 08:54:11.815076 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19941): Launched 08:54:12.118660 run osmo-stp_10.42.42.5(pid=19942): Launched 08:54:12.230218 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:54:12.759477 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19944): Launched 08:54:12.868920 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:54:13.133162 run patchelf(pid=19945): Launched 08:54:13.311090 run osmo-stp_10.42.42.5(pid=19942): ERR: Terminated: ERROR {rc=1} [trial-2372↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19942)] 08:54:13.441483 run osmo-stp_10.42.42.5(pid=19942): stdout: | (launched: 2022-12-10_08:54:11.969086) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:54:13.572057 run osmo-stp_10.42.42.5(pid=19942): stderr: | �[0;m�[38;5;43m20221210085412140 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210085412140 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210085412141 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210085412141 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210085412142 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210085412142 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210085412142 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:54:13.698193 run osmo-stp_10.42.42.5(pid=19942): stdout: | (launched: 2022-12-10_08:54:11.969086) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:54:13.823306 run osmo-stp_10.42.42.5(pid=19942): stderr: | �[0;m�[38;5;43m20221210085412140 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210085412140 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210085412141 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210085412141 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210085412142 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210085412142 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210085412142 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:54:13.968624 run patchelf(pid=19945): Terminating (SIGINT) 08:54:14.139412 run patchelf(pid=19945): Terminated: ok {rc=0} 08:54:14.170633 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=19942): Process ended prematurely: osmo-stp_10.42.42.5(pid=19942) [trial-2372↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19942)] [trial-2372↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8] 08:54:14.179777 tst iperf3.py:8: Test FAILED (7.5 sec) 08:54:14.240275 run osmo-hlr_10.42.42.2(pid=19939): ERR: Terminated: ERROR {rc=237} [trial-2372↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19939)] 08:54:14.289443 run osmo-hlr_10.42.42.2(pid=19939): stdout: | (launched: 2022-12-10_08:54:11.009652) 08:54:14.339746 run osmo-hlr_10.42.42.2(pid=19939): stderr: | �[0;m�[1;31m20221210085411188 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210085411188 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210085411188 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210085411188 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210085411188 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210085411188 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210085411201 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2372/run.2022-12-10_08-20-36/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210085411209 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210085411209 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210085411209 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:54:14.381680 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19934): Terminating (SIGTERM) 08:54:14.421293 run iperf3-srv_10.42.42.10(pid=19935): Terminating (SIGTERM) 08:54:14.460938 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19938): Terminating (SIGTERM) 08:54:14.500777 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19941): Terminating (SIGTERM) 08:54:14.540461 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19944): Terminating (SIGTERM) 08:54:14.549836 --- ParallelTerminationStrategy: PID 19934 died... 08:54:14.602908 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19934): Terminated: ok {rc=0} 08:54:14.612692 --- ParallelTerminationStrategy: PID 19935 died... 08:54:14.665723 run iperf3-srv_10.42.42.10(pid=19935): Terminated {rc=256} 08:54:14.675285 --- ParallelTerminationStrategy: PID 19938 died... 08:54:14.728197 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19938): Terminated: ok {rc=0} 08:54:14.738048 --- ParallelTerminationStrategy: PID 19941 died... 08:54:14.790876 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19941): Terminated: ok {rc=0} 08:54:14.800654 --- ParallelTerminationStrategy: PID 19944 died... 08:54:14.853755 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19944): Terminated: ok {rc=0} 08:54:14.941955 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19942): Process ended prematurely: osmo-stp_10.42.42.5(pid=19942) [trial-2372↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19942)]