Failed

gprs:trx-umtrx+mod-bts0-egprs.ping.py (from gprs_trx-umtrx+mod-bts0-egprs)

Failing for the past 234 builds (Since #2139 )

Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=20522): Process ended prematurely: osmo-stp_10.42.42.5(pid=20522) [trial-2372↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20522)]

Standard Output

----------------------------------------------
trial-2372 gprs:trx-umtrx+mod-bts0-egprs ping.py
----------------------------------------------
09:01:50.785720 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
09:01:50.797571 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1)
09:01:50.939140 tst                          ping.py: using LAC 27303
09:01:51.055435 tst                          ping.py: using RAC 18
09:01:51.172540 tst                          ping.py: using CellId 27303
09:01:51.289579 tst                          ping.py: using BVCI 27304
09:01:51.312635 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
09:01:51.323600 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
09:01:51.334483 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
09:01:51.345631 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
09:01:51.356293 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
09:01:51.367756 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
09:01:51.379070 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
09:01:51.390196 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4)
09:01:51.681230 tst                       ping.py:19: start network...
09:01:51.814546 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
09:01:52.326645 run         create_hlr_db(pid=20516): Launched
09:01:52.513707 bus                          /gobi_6: Setting Powered False
09:01:53.533203 run         create_hlr_db(pid=20516): Terminated: ok {rc=0}
09:01:53.938551 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20518): Launched
09:01:54.239547 run   osmo-hlr_10.42.42.2(pid=20519): Launched
09:01:54.351566 run              osmo-stp_10.42.42.5: Starting osmo-stp
09:01:54.874927 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20521): Launched
09:01:55.174647 run   osmo-stp_10.42.42.5(pid=20522): Launched
09:01:55.284541 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
09:01:55.809564 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20524): Launched
09:01:55.916771 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
09:01:56.178758 run              patchelf(pid=20525): Launched
09:01:56.354673 run   osmo-stp_10.42.42.5(pid=20522): ERR: Terminated: ERROR {rc=1}  [trial-2372↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20522)]
09:01:56.483497 run   osmo-stp_10.42.42.5(pid=20522): stdout: 
| (launched: 2022-12-10_09:01:55.026651)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
09:01:56.612395 run   osmo-stp_10.42.42.5(pid=20522): stderr: 
| �[0;m�[38;5;43m20221210090155199 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210090155199 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210090155200 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210090155200 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210090155201 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210090155201 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210090155201 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
09:01:56.737380 run   osmo-stp_10.42.42.5(pid=20522): stdout: 
| (launched: 2022-12-10_09:01:55.026651)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
09:01:56.861686 run   osmo-stp_10.42.42.5(pid=20522): stderr: 
| �[0;m�[38;5;43m20221210090155199 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210090155199 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210090155200 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210090155200 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210090155201 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210090155201 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210090155201 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
09:01:57.005427 run              patchelf(pid=20525): Terminating (SIGINT)
09:01:57.174076 run              patchelf(pid=20525): Terminated: ok {rc=0}
09:01:57.204634 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=20522): Process ended prematurely: osmo-stp_10.42.42.5(pid=20522) [trial-2372↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20522)]  [trial-2372↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22]
09:01:57.213383 tst                       ping.py:22: Test FAILED (6.4 sec)
09:01:57.273284 run   osmo-hlr_10.42.42.2(pid=20519): ERR: Terminated: ERROR {rc=237}  [trial-2372↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20519)]
09:01:57.321704 run   osmo-hlr_10.42.42.2(pid=20519): stdout: 
| (launched: 2022-12-10_09:01:54.091725) 
09:01:57.371044 run   osmo-hlr_10.42.42.2(pid=20519): stderr: 
| �[0;m�[1;31m20221210090154268 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210090154268 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210090154268 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210090154268 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210090154268 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210090154268 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210090154281 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2372/run.2022-12-10_08-20-36/gprs:trx-umtrx+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210090154290 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210090154290 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210090154290 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
09:01:57.412771 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20518): Terminating (SIGTERM)
09:01:57.452628 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20521): Terminating (SIGTERM)
09:01:57.492854 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20524): Terminating (SIGTERM)
09:01:57.502486 ---      ParallelTerminationStrategy: PID 20518 died...
09:01:57.556015 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20518): Terminated: ok {rc=0}
09:01:57.565838 ---      ParallelTerminationStrategy: PID 20521 died...
09:01:57.619122 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20521): Terminated: ok {rc=0}
09:01:57.628688 ---      ParallelTerminationStrategy: PID 20524 died...
09:01:57.681702 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20524): Terminated: ok {rc=0}
09:01:57.768776 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20522): Process ended prematurely: osmo-stp_10.42.42.5(pid=20522) [trial-2372↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20522)]