Failed
gprs:trx-lms-limenet-micro+mod-bts0-egprs.ping.py (from gprs_trx-lms-limenet-micro+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=22499): Process ended prematurely: osmo-stp_10.42.42.5(pid=22499) [trial-2372↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22499)]
Standard Output
---------------------------------------------- trial-2372 gprs:trx-lms-limenet-micro+mod-bts0-egprs ping.py ---------------------------------------------- 09:18:35.224903 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:18:35.236895 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x bts (candidates: 1) 09:18:35.381080 tst ping.py: using LAC 27392 09:18:35.500165 tst ping.py: using RAC 107 09:18:35.618073 tst ping.py: using CellId 27392 09:18:35.733969 tst ping.py: using BVCI 27393 09:18:35.757031 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:18:35.768206 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:18:35.779312 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:18:35.791002 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:18:35.802241 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:18:35.813644 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:18:35.825156 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:18:35.836645 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x modem (candidates: 4) 09:18:36.123505 tst ping.py:19: start network... 09:18:36.255445 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:18:36.762863 run create_hlr_db(pid=22493): Launched 09:18:36.945758 bus /gobi_6: Setting Powered False 09:18:37.965716 run create_hlr_db(pid=22493): Terminated: ok {rc=0} 09:18:38.387580 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22495): Launched 09:18:38.706716 run osmo-hlr_10.42.42.2(pid=22496): Launched 09:18:38.822317 run osmo-stp_10.42.42.5: Starting osmo-stp 09:18:39.379786 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22498): Launched 09:18:39.697937 run osmo-stp_10.42.42.5(pid=22499): Launched 09:18:39.811092 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:18:40.364781 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22501): Launched 09:18:40.477715 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:18:40.755795 run patchelf(pid=22502): Launched 09:18:40.941101 run osmo-stp_10.42.42.5(pid=22499): ERR: Terminated: ERROR {rc=1} [trial-2372↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22499)] 09:18:41.076102 run osmo-stp_10.42.42.5(pid=22499): stdout: | (launched: 2022-12-10_09:18:39.539307) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:18:41.211846 run osmo-stp_10.42.42.5(pid=22499): stderr: | �[0;m�[38;5;43m20221210091839735 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210091839735 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210091839735 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210091839735 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210091839736 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210091839736 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210091839736 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:18:41.342776 run osmo-stp_10.42.42.5(pid=22499): stdout: | (launched: 2022-12-10_09:18:39.539307) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:18:41.472331 run osmo-stp_10.42.42.5(pid=22499): stderr: | �[0;m�[38;5;43m20221210091839735 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210091839735 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210091839735 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210091839735 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210091839736 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210091839736 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210091839736 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:18:41.623551 run patchelf(pid=22502): Terminating (SIGINT) 09:18:41.800666 run patchelf(pid=22502): Terminated: ok {rc=0} 09:18:41.832645 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=22499): Process ended prematurely: osmo-stp_10.42.42.5(pid=22499) [trial-2372↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22499)] [trial-2372↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪ping.py:22] 09:18:41.841706 tst ping.py:22: Test FAILED (6.6 sec) 09:18:41.903720 run osmo-hlr_10.42.42.2(pid=22496): ERR: Terminated: ERROR {rc=237} [trial-2372↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22496)] 09:18:41.954280 run osmo-hlr_10.42.42.2(pid=22496): stdout: | (launched: 2022-12-10_09:18:38.547544) 09:18:42.005682 run osmo-hlr_10.42.42.2(pid=22496): stderr: | �[0;m�[1;31m20221210091838751 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210091838751 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210091838751 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210091838751 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210091838751 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210091838751 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210091838764 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2372/run.2022-12-10_08-20-36/gprs:trx-lms-limenet-micro+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210091838774 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210091838774 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210091838774 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:18:42.049568 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22495): Terminating (SIGTERM) 09:18:42.091017 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22498): Terminating (SIGTERM) 09:18:42.132665 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22501): Terminating (SIGTERM) 09:18:42.142322 --- ParallelTerminationStrategy: PID 22495 died... 09:18:42.197827 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22495): Terminated: ok {rc=0} 09:18:42.207859 --- ParallelTerminationStrategy: PID 22498 died... 09:18:42.263092 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22498): Terminated: ok {rc=0} 09:18:42.273435 --- ParallelTerminationStrategy: PID 22501 died... 09:18:42.328696 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22501): Terminated: ok {rc=0} 09:18:42.414786 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22499): Process ended prematurely: osmo-stp_10.42.42.5(pid=22499) [trial-2372↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22499)]