Failed
gprs:nanobts+band-900+mod-bts0-egprs.ping.py (from gprs_nanobts+band-900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=31716): Process ended prematurely: osmo-stp_10.42.42.5(pid=31716) [trial-2373↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31716)]
Standard Output
---------------------------------------------- trial-2373 gprs:nanobts+band-900+mod-bts0-egprs ping.py ---------------------------------------------- 10:59:20.021462 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:59:20.033481 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 10:59:20.177810 tst ping.py: using LAC 27924 10:59:20.302168 tst ping.py: using RAC 129 10:59:20.426502 tst ping.py: using CellId 27924 10:59:20.550379 tst ping.py: using BVCI 27925 10:59:20.574688 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:59:20.586182 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:59:20.597507 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:59:20.608858 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:59:20.620192 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:59:20.631562 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:59:20.643218 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:59:20.654678 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 10:59:20.926931 tst ping.py:19: start network... 10:59:21.049581 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:59:21.526267 run create_hlr_db(pid=31710): Launched 10:59:21.697829 bus /gobi_6: Setting Powered False 10:59:22.718971 run create_hlr_db(pid=31710): Terminated: ok {rc=0} 10:59:23.140164 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31712): Launched 10:59:23.457559 run osmo-hlr_10.42.42.2(pid=31713): Launched 10:59:23.578212 run osmo-stp_10.42.42.5: Starting osmo-stp 10:59:24.130669 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31715): Launched 10:59:24.446564 run osmo-stp_10.42.42.5(pid=31716): Launched 10:59:24.561337 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:59:25.117783 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31718): Launched 10:59:25.232627 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:59:25.509702 run patchelf(pid=31719): Launched 10:59:25.696318 run osmo-stp_10.42.42.5(pid=31716): ERR: Terminated: ERROR {rc=1} [trial-2373↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31716)] 10:59:25.832511 run osmo-stp_10.42.42.5(pid=31716): stdout: | (launched: 2022-12-10_10:59:24.291060) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:59:25.969055 run osmo-stp_10.42.42.5(pid=31716): stderr: | �[0;m�[38;5;43m20221210105924483 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210105924483 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210105924484 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210105924484 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210105924485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210105924485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210105924485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:59:26.100685 run osmo-stp_10.42.42.5(pid=31716): stdout: | (launched: 2022-12-10_10:59:24.291060) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:59:26.231635 run osmo-stp_10.42.42.5(pid=31716): stderr: | �[0;m�[38;5;43m20221210105924483 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210105924483 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210105924484 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210105924484 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210105924485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210105924485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210105924485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:59:26.383902 run patchelf(pid=31719): Terminating (SIGINT) 10:59:26.562913 run patchelf(pid=31719): Terminated: ok {rc=0} 10:59:26.595346 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=31716): Process ended prematurely: osmo-stp_10.42.42.5(pid=31716) [trial-2373↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31716)] [trial-2373↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22] 10:59:26.604634 tst ping.py:22: Test FAILED (6.6 sec) 10:59:26.668130 run osmo-hlr_10.42.42.2(pid=31713): ERR: Terminated: ERROR {rc=237} [trial-2373↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31713)] 10:59:26.719387 run osmo-hlr_10.42.42.2(pid=31713): stdout: | (launched: 2022-12-10_10:59:23.301831) 10:59:26.771219 run osmo-hlr_10.42.42.2(pid=31713): stderr: | �[0;m�[1;31m20221210105923499 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210105923499 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210105923499 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210105923499 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210105923499 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210105923499 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210105923512 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2373/run.2022-12-10_09-48-07/gprs:nanobts+band-900+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210105923520 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210105923520 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210105923520 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:59:26.815819 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31712): Terminating (SIGTERM) 10:59:26.857847 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31715): Terminating (SIGTERM) 10:59:26.899303 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31718): Terminating (SIGTERM) 10:59:26.909332 --- ParallelTerminationStrategy: PID 31712 died... 10:59:26.965257 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31712): Terminated: ok {rc=0} 10:59:26.975386 --- ParallelTerminationStrategy: PID 31715 died... 10:59:27.031186 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31715): Terminated: ok {rc=0} 10:59:27.041312 --- ParallelTerminationStrategy: PID 31718 died... 10:59:27.096616 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31718): Terminated: ok {rc=0} 10:59:27.184030 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31716): Process ended prematurely: osmo-stp_10.42.42.5(pid=31716) [trial-2373↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31716)]