Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=32348): Process ended prematurely: osmo-stp_10.42.42.5(pid=32348) [trial-2373↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32348)]
Standard Output
---------------------------------------------- trial-2373 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 11:00:38.079330 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:00:38.090693 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 11:00:38.227895 tst cs_paging_gprs_active.py: using LAC 27931 11:00:38.344428 tst cs_paging_gprs_active.py: using RAC 136 11:00:38.459968 tst cs_paging_gprs_active.py: using CellId 27931 11:00:38.577848 tst cs_paging_gprs_active.py: using BVCI 27932 11:00:38.600559 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:00:38.611850 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:00:38.623042 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:00:38.634269 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:00:38.645377 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:00:38.656378 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:00:38.667645 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:00:38.678717 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:00:38.690079 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 11:00:38.808406 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 11:00:39.085878 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:00:39.211421 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:00:39.523419 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32338): Launched 11:00:39.780813 run iperf3-srv_10.42.42.10(pid=32339): Launched 11:00:39.965421 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:00:40.090818 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:00:40.403432 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32340): Launched 11:00:40.660931 run iperf3-srv_10.42.42.10(pid=32341): Launched 11:00:40.843279 tst cs_paging_gprs_active.py:38: start network... 11:00:40.967400 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:00:41.450901 run create_hlr_db(pid=32342): Launched 11:00:41.625543 bus /gobi_6: Setting Powered False 11:00:42.646472 run create_hlr_db(pid=32342): Terminated: ok {rc=0} 11:00:43.072053 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32344): Launched 11:00:43.391858 run osmo-hlr_10.42.42.2(pid=32345): Launched 11:00:43.512062 run osmo-stp_10.42.42.5: Starting osmo-stp 11:00:44.068924 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32347): Launched 11:00:44.389620 run osmo-stp_10.42.42.5(pid=32348): Launched 11:00:44.509889 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:00:45.067189 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32350): Launched 11:00:45.181895 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:00:45.463448 run patchelf(pid=32351): Launched 11:00:45.651381 run osmo-stp_10.42.42.5(pid=32348): ERR: Terminated: ERROR {rc=1} [trial-2373↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32348)] 11:00:45.788492 run osmo-stp_10.42.42.5(pid=32348): stdout: | (launched: 2022-12-10_11:00:44.232563) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:00:45.934361 run osmo-stp_10.42.42.5(pid=32348): stderr: | �[0;m�[38;5;43m20221210110044424 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210110044424 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210110044424 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210110044425 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210110044425 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210110044425 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210110044425 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:00:46.070415 run osmo-stp_10.42.42.5(pid=32348): stdout: | (launched: 2022-12-10_11:00:44.232563) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:00:46.205221 run osmo-stp_10.42.42.5(pid=32348): stderr: | �[0;m�[38;5;43m20221210110044424 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210110044424 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210110044424 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210110044425 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210110044425 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210110044425 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210110044425 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:00:46.363073 run patchelf(pid=32351): Terminating (SIGINT) 11:00:46.547406 run patchelf(pid=32351): Terminated: ok {rc=0} 11:00:46.582057 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=32348): Process ended prematurely: osmo-stp_10.42.42.5(pid=32348) [trial-2373↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32348)] [trial-2373↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 11:00:46.592925 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 11:00:46.660458 run osmo-hlr_10.42.42.2(pid=32345): ERR: Terminated: ERROR {rc=237} [trial-2373↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=32345)] 11:00:46.714321 run osmo-hlr_10.42.42.2(pid=32345): stdout: | (launched: 2022-12-10_11:00:43.234962) 11:00:46.769168 run osmo-hlr_10.42.42.2(pid=32345): stderr: | �[0;m�[1;31m20221210110043430 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210110043430 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210110043430 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210110043430 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210110043430 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210110043430 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210110043443 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2373/run.2022-12-10_09-48-07/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210110043453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210110043454 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210110043454 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:00:46.815692 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32338): Terminating (SIGTERM) 11:00:46.861854 run iperf3-srv_10.42.42.10(pid=32339): Terminating (SIGTERM) 11:00:46.907565 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32340): Terminating (SIGTERM) 11:00:46.952396 run iperf3-srv_10.42.42.10(pid=32341): Terminating (SIGTERM) 11:00:46.998215 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32344): Terminating (SIGTERM) 11:00:47.042228 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32347): Terminating (SIGTERM) 11:00:47.086229 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32350): Terminating (SIGTERM) 11:00:47.097386 --- ParallelTerminationStrategy: PID 32338 died... 11:00:47.154717 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32338): Terminated: ok {rc=0} 11:00:47.166619 --- ParallelTerminationStrategy: PID 32339 died... 11:00:47.225243 run iperf3-srv_10.42.42.10(pid=32339): Terminated {rc=256} 11:00:47.235321 --- ParallelTerminationStrategy: PID 32340 died... 11:00:47.292020 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32340): Terminated: ok {rc=0} 11:00:47.302114 --- ParallelTerminationStrategy: PID 32341 died... 11:00:47.358023 run iperf3-srv_10.42.42.10(pid=32341): Terminated {rc=256} 11:00:47.368776 --- ParallelTerminationStrategy: PID 32344 died... 11:00:47.425382 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32344): Terminated: ok {rc=0} 11:00:47.435422 --- ParallelTerminationStrategy: PID 32347 died... 11:00:47.492115 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32347): Terminated: ok {rc=0} 11:00:47.502342 --- ParallelTerminationStrategy: PID 32350 died... 11:00:47.559319 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32350): Terminated: ok {rc=0} 11:00:47.645733 bus /gobi_0: Setting Powered False 11:00:48.753844 bus /gobi_0: Setting Powered False 11:00:49.866092 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=32348): Process ended prematurely: osmo-stp_10.42.42.5(pid=32348) [trial-2373↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32348)]