Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-lms.ping_idle_ping.py (from gprs_trx-lms)

Failing for the past 54 builds (Since #2320 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=29627): Process ended prematurely: osmo-stp_10.42.42.5(pid=29627) [trial-2373↪gprs:trx-lms↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29627)]

Standard Output

----------------------------------------------
trial-2373 gprs:trx-lms ping_idle_ping.py
----------------------------------------------
10:37:17.283848 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
10:37:17.295107 tst                     gprs:trx-lms: Using 1 x bts (candidates: 1)
10:37:17.431441 tst                ping_idle_ping.py: using LAC 27807
10:37:17.550849 tst                ping_idle_ping.py: using RAC 12
10:37:17.667693 tst                ping_idle_ping.py: using CellId 27807
10:37:17.786483 tst                ping_idle_ping.py: using BVCI 27808
10:37:17.809230 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
10:37:17.819686 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
10:37:17.830147 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
10:37:17.840622 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
10:37:17.851241 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
10:37:17.861575 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
10:37:17.872002 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
10:37:17.882406 tst                     gprs:trx-lms: Using 1 x modem (candidates: 4)
10:37:18.154489 tst             ping_idle_ping.py:24: start network...
10:37:18.278541 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
10:37:18.758538 run         create_hlr_db(pid=29621): Launched
10:37:18.931496 bus                          /gobi_6: Setting Powered False
10:37:19.953238 run         create_hlr_db(pid=29621): Terminated: ok {rc=0}
10:37:20.352888 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29623): Launched
10:37:20.652218 run   osmo-hlr_10.42.42.2(pid=29624): Launched
10:37:20.761746 run              osmo-stp_10.42.42.5: Starting osmo-stp
10:37:21.280009 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29626): Launched
10:37:21.579003 run   osmo-stp_10.42.42.5(pid=29627): Launched
10:37:21.687241 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
10:37:22.207593 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29629): Launched
10:37:22.314200 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
10:37:22.574357 run              patchelf(pid=29630): Launched
10:37:22.749700 run   osmo-stp_10.42.42.5(pid=29627): ERR: Terminated: ERROR {rc=1}  [trial-2373↪gprs:trx-lms↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29627)]
10:37:22.877864 run   osmo-stp_10.42.42.5(pid=29627): stdout: 
| (launched: 2022-12-10_10:37:21.431206)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:37:23.006127 run   osmo-stp_10.42.42.5(pid=29627): stderr: 
| �[0;m�[38;5;43m20221210103721599 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210103721599 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210103721600 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210103721600 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210103721601 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210103721601 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210103721601 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:37:23.129734 run   osmo-stp_10.42.42.5(pid=29627): stdout: 
| (launched: 2022-12-10_10:37:21.431206)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:37:23.251912 run   osmo-stp_10.42.42.5(pid=29627): stderr: 
| �[0;m�[38;5;43m20221210103721599 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210103721599 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210103721600 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210103721600 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210103721601 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210103721601 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210103721601 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:37:23.394825 run              patchelf(pid=29630): Terminating (SIGINT)
10:37:23.562879 run              patchelf(pid=29630): Terminated: ok {rc=0}
10:37:23.593549 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=29627): Process ended prematurely: osmo-stp_10.42.42.5(pid=29627) [trial-2373↪gprs:trx-lms↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29627)]  [trial-2373↪gprs:trx-lms↪ping_idle_ping.py:27]
10:37:23.602237 tst             ping_idle_ping.py:27: Test FAILED (6.3 sec)
10:37:23.661997 run   osmo-hlr_10.42.42.2(pid=29624): ERR: Terminated: ERROR {rc=237}  [trial-2373↪gprs:trx-lms↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29624)]
10:37:23.710476 run   osmo-hlr_10.42.42.2(pid=29624): stdout: 
| (launched: 2022-12-10_10:37:20.504454) 
10:37:23.759745 run   osmo-hlr_10.42.42.2(pid=29624): stderr: 
| �[0;m�[1;31m20221210103720681 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210103720681 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210103720682 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210103720682 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210103720682 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210103720682 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210103720694 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2373/run.2022-12-10_09-48-07/gprs:trx-lms/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210103720703 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210103720703 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210103720703 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
10:37:23.801948 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29623): Terminating (SIGTERM)
10:37:23.842005 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29626): Terminating (SIGTERM)
10:37:23.881898 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29629): Terminating (SIGTERM)
10:37:23.891262 ---      ParallelTerminationStrategy: PID 29623 died...
10:37:23.944327 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29623): Terminated: ok {rc=0}
10:37:23.954012 ---      ParallelTerminationStrategy: PID 29626 died...
10:37:24.007146 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29626): Terminated: ok {rc=0}
10:37:24.016734 ---      ParallelTerminationStrategy: PID 29629 died...
10:37:24.069705 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29629): Terminated: ok {rc=0}
10:37:24.158481 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29627): Process ended prematurely: osmo-stp_10.42.42.5(pid=29627) [trial-2373↪gprs:trx-lms↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29627)]