Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=29183): Process ended prematurely: osmo-stp_10.42.42.5(pid=29183) [trial-2373↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29183)]
Standard Output
---------------------------------------------- trial-2373 gprs:trx-umtrx+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 10:30:48.680905 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:30:48.692434 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 10:30:48.856346 tst iperf3.py: using LAC 27772 10:30:48.983410 tst iperf3.py: using RAC 232 10:30:49.109584 tst iperf3.py: using CellId 27772 10:30:49.237148 tst iperf3.py: using BVCI 27773 10:30:49.261816 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:30:49.273214 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:30:49.284346 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:30:49.295770 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:30:49.307063 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:30:49.318982 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:30:49.330626 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:30:49.342017 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:30:49.353594 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:30:49.630756 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 10:30:49.755228 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:30:50.066572 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29175): Launched 10:30:50.325312 run iperf3-srv_10.42.42.10(pid=29176): Launched 10:30:50.507188 tst iperf3.py:8: start network... 10:30:50.631591 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:30:51.111822 run create_hlr_db(pid=29177): Launched 10:30:51.285786 bus /gobi_6: Setting Powered False 10:30:52.306455 run create_hlr_db(pid=29177): Terminated: ok {rc=0} 10:30:52.733583 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29179): Launched 10:30:53.054647 run osmo-hlr_10.42.42.2(pid=29180): Launched 10:30:53.175622 run osmo-stp_10.42.42.5: Starting osmo-stp 10:30:53.735708 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29182): Launched 10:30:54.055737 run osmo-stp_10.42.42.5(pid=29183): Launched 10:30:54.175978 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:30:54.735279 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29185): Launched 10:30:54.850062 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:30:55.129535 run patchelf(pid=29186): Launched 10:30:55.318865 run osmo-stp_10.42.42.5(pid=29183): ERR: Terminated: ERROR {rc=1} [trial-2373↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29183)] 10:30:55.457080 run osmo-stp_10.42.42.5(pid=29183): stdout: | (launched: 2022-12-10_10:30:53.898410) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:30:55.595485 run osmo-stp_10.42.42.5(pid=29183): stderr: | �[0;m�[38;5;43m20221210103054090 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210103054090 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210103054090 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210103054090 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210103054091 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210103054091 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210103054091 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:30:55.728788 run osmo-stp_10.42.42.5(pid=29183): stdout: | (launched: 2022-12-10_10:30:53.898410) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:30:55.860916 run osmo-stp_10.42.42.5(pid=29183): stderr: | �[0;m�[38;5;43m20221210103054090 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210103054090 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210103054090 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210103054090 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210103054091 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210103054091 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210103054091 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:30:56.015515 run patchelf(pid=29186): Terminating (SIGINT) 10:30:56.196792 run patchelf(pid=29186): Terminated: ok {rc=0} 10:30:56.230194 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=29183): Process ended prematurely: osmo-stp_10.42.42.5(pid=29183) [trial-2373↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29183)] [trial-2373↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8] 10:30:56.240059 tst iperf3.py:8: Test FAILED (7.6 sec) 10:30:56.304034 run osmo-hlr_10.42.42.2(pid=29180): ERR: Terminated: ERROR {rc=237} [trial-2373↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29180)] 10:30:56.356183 run osmo-hlr_10.42.42.2(pid=29180): stdout: | (launched: 2022-12-10_10:30:52.897144) 10:30:56.408578 run osmo-hlr_10.42.42.2(pid=29180): stderr: | �[0;m�[1;31m20221210103053097 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210103053097 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210103053097 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210103053097 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210103053097 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210103053097 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210103053110 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2373/run.2022-12-10_09-48-07/gprs:trx-umtrx+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210103053118 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210103053118 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210103053118 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:30:56.453309 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29175): Terminating (SIGTERM) 10:30:56.495466 run iperf3-srv_10.42.42.10(pid=29176): Terminating (SIGTERM) 10:30:56.537854 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29179): Terminating (SIGTERM) 10:30:56.580731 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29182): Terminating (SIGTERM) 10:30:56.623100 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29185): Terminating (SIGTERM) 10:30:56.632859 --- ParallelTerminationStrategy: PID 29175 died... 10:30:56.689909 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29175): Terminated: ok {rc=0} 10:30:56.700015 --- ParallelTerminationStrategy: PID 29176 died... 10:30:56.756211 run iperf3-srv_10.42.42.10(pid=29176): Terminated {rc=256} 10:30:56.766341 --- ParallelTerminationStrategy: PID 29179 died... 10:30:56.822580 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29179): Terminated: ok {rc=0} 10:30:56.832576 --- ParallelTerminationStrategy: PID 29182 died... 10:30:56.889254 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29182): Terminated: ok {rc=0} 10:30:56.899423 --- ParallelTerminationStrategy: PID 29185 died... 10:30:56.955571 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29185): Terminated: ok {rc=0} 10:30:57.043614 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29183): Process ended prematurely: osmo-stp_10.42.42.5(pid=29183) [trial-2373↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29183)]