Failed
gprs:nanobts+band-1900+mod-bts0-dynts-ipa.ping.py (from gprs_nanobts+band-1900+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=7293): Process ended prematurely: osmo-stp_10.42.42.5(pid=7293) [trial-2374↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7293)]
Standard Output
---------------------------------------------- trial-2374 gprs:nanobts+band-1900+mod-bts0-dynts-ipa ping.py ---------------------------------------------- 12:21:03.086467 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:21:03.098647 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 12:21:03.249835 tst ping.py: using LAC 28357 12:21:03.365579 tst ping.py: using RAC 52 12:21:03.484400 tst ping.py: using CellId 28357 12:21:03.598289 tst ping.py: using BVCI 28358 12:21:03.620516 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:21:03.631420 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:21:03.642065 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:21:03.652662 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:21:03.663589 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:21:03.674388 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:21:03.685208 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:21:03.695732 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 12:21:03.980392 tst ping.py:19: start network... 12:21:04.111925 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:21:04.606118 run create_hlr_db(pid=7287): Launched 12:21:04.789291 bus /gobi_6: Setting Powered False 12:21:05.810627 run create_hlr_db(pid=7287): Terminated: ok {rc=0} 12:21:06.203583 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7289): Launched 12:21:06.495692 run osmo-hlr_10.42.42.2(pid=7290): Launched 12:21:06.611415 run osmo-stp_10.42.42.5: Starting osmo-stp 12:21:07.131270 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7292): Launched 12:21:07.422553 run osmo-stp_10.42.42.5(pid=7293): Launched 12:21:07.528541 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:21:08.036355 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7295): Launched 12:21:08.139254 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:21:08.391924 run patchelf(pid=7296): Launched 12:21:08.562346 run osmo-stp_10.42.42.5(pid=7293): ERR: Terminated: ERROR {rc=1} [trial-2374↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7293)] 12:21:08.686717 run osmo-stp_10.42.42.5(pid=7293): stdout: | (launched: 2022-12-10_12:21:07.279080) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:21:08.811033 run osmo-stp_10.42.42.5(pid=7293): stderr: | �[0;m�[38;5;43m20221210122107448 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210122107448 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210122107448 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210122107449 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210122107451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210122107451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210122107451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:21:08.930836 run osmo-stp_10.42.42.5(pid=7293): stdout: | (launched: 2022-12-10_12:21:07.279080) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:21:09.050080 run osmo-stp_10.42.42.5(pid=7293): stderr: | �[0;m�[38;5;43m20221210122107448 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210122107448 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210122107448 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210122107449 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210122107451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210122107451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210122107451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:21:09.189122 run patchelf(pid=7296): Terminating (SIGINT) 12:21:09.352100 run patchelf(pid=7296): Terminated: ok {rc=0} 12:21:09.381790 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=7293): Process ended prematurely: osmo-stp_10.42.42.5(pid=7293) [trial-2374↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7293)] [trial-2374↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping.py:22] 12:21:09.390163 tst ping.py:22: Test FAILED (6.3 sec) 12:21:09.448830 run osmo-hlr_10.42.42.2(pid=7290): ERR: Terminated: ERROR {rc=237} [trial-2374↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7290)] 12:21:09.496613 run osmo-hlr_10.42.42.2(pid=7290): stdout: | (launched: 2022-12-10_12:21:06.351924) 12:21:09.544871 run osmo-hlr_10.42.42.2(pid=7290): stderr: | �[0;m�[1;31m20221210122106525 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210122106525 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210122106525 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210122106526 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210122106526 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210122106526 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210122106538 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:nanobts+band-1900+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210122106546 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210122106546 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210122106547 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:21:09.585898 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7289): Terminating (SIGTERM) 12:21:09.624462 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7292): Terminating (SIGTERM) 12:21:09.663179 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7295): Terminating (SIGTERM) 12:21:09.672218 --- ParallelTerminationStrategy: PID 7289 died... 12:21:09.724896 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7289): Terminated: ok {rc=0} 12:21:09.734423 --- ParallelTerminationStrategy: PID 7292 died... 12:21:09.786303 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7292): Terminated: ok {rc=0} 12:21:09.795639 --- ParallelTerminationStrategy: PID 7295 died... 12:21:09.847383 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7295): Terminated: ok {rc=0} 12:21:09.934675 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7293): Process ended prematurely: osmo-stp_10.42.42.5(pid=7293) [trial-2374↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7293)]