Failed
gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa.ping.py (from gprs_trx-lms-limenet-micro+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=6794): Process ended prematurely: osmo-stp_10.42.42.5(pid=6794) [trial-2374↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6794)]
Standard Output
---------------------------------------------- trial-2374 gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa ping.py ---------------------------------------------- 12:13:59.307236 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:13:59.319517 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 12:13:59.477565 tst ping.py: using LAC 28319 12:13:59.599844 tst ping.py: using RAC 14 12:13:59.720300 tst ping.py: using CellId 28319 12:13:59.843965 tst ping.py: using BVCI 28320 12:13:59.866410 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:13:59.877558 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:13:59.888351 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:13:59.902048 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:13:59.913849 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:13:59.925201 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:13:59.936883 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:13:59.948378 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 12:14:00.218404 tst ping.py:19: start network... 12:14:00.340516 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:14:00.804531 run create_hlr_db(pid=6788): Launched 12:14:01.005761 bus /gobi_6: Setting Powered False 12:14:02.046400 run create_hlr_db(pid=6788): Terminated: ok {rc=0} 12:14:02.508146 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6790): Launched 12:14:02.818802 run osmo-hlr_10.42.42.2(pid=6791): Launched 12:14:02.933572 run osmo-stp_10.42.42.5: Starting osmo-stp 12:14:03.476780 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6793): Launched 12:14:03.787774 run osmo-stp_10.42.42.5(pid=6794): Launched 12:14:03.900872 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:14:04.443607 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6796): Launched 12:14:04.554400 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:14:04.824919 run patchelf(pid=6797): Launched 12:14:05.006846 run osmo-stp_10.42.42.5(pid=6794): ERR: Terminated: ERROR {rc=1} [trial-2374↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6794)] 12:14:05.139600 run osmo-stp_10.42.42.5(pid=6794): stdout: | (launched: 2022-12-10_12:14:03.634488) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:14:05.272567 run osmo-stp_10.42.42.5(pid=6794): stderr: | �[0;m�[38;5;43m20221210121403824 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210121403824 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210121403824 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210121403825 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210121403825 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210121403825 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210121403825 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:14:05.401590 run osmo-stp_10.42.42.5(pid=6794): stdout: | (launched: 2022-12-10_12:14:03.634488) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:14:05.529193 run osmo-stp_10.42.42.5(pid=6794): stderr: | �[0;m�[38;5;43m20221210121403824 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210121403824 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210121403824 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210121403825 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210121403825 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210121403825 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210121403825 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:14:05.677384 run patchelf(pid=6797): Terminating (SIGINT) 12:14:05.851106 run patchelf(pid=6797): Terminated: ok {rc=0} 12:14:05.882724 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=6794): Process ended prematurely: osmo-stp_10.42.42.5(pid=6794) [trial-2374↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6794)] [trial-2374↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪ping.py:22] 12:14:05.891719 tst ping.py:22: Test FAILED (6.6 sec) 12:14:05.954812 run osmo-hlr_10.42.42.2(pid=6791): ERR: Terminated: ERROR {rc=237} [trial-2374↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6791)] 12:14:06.006035 run osmo-hlr_10.42.42.2(pid=6791): stdout: | (launched: 2022-12-10_12:14:02.666543) 12:14:06.057715 run osmo-hlr_10.42.42.2(pid=6791): stderr: | �[0;m�[1;31m20221210121402862 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210121402862 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210121402862 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210121402862 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210121402862 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210121402862 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210121402875 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210121402883 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210121402883 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210121402883 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:14:06.101869 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6790): Terminating (SIGTERM) 12:14:06.143298 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6793): Terminating (SIGTERM) 12:14:06.184992 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6796): Terminating (SIGTERM) 12:14:06.194889 --- ParallelTerminationStrategy: PID 6790 died... 12:14:06.250794 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6790): Terminated: ok {rc=0} 12:14:06.260922 --- ParallelTerminationStrategy: PID 6793 died... 12:14:06.315995 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6793): Terminated: ok {rc=0} 12:14:06.326074 --- ParallelTerminationStrategy: PID 6796 died... 12:14:06.381351 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6796): Terminated: ok {rc=0} 12:14:06.467758 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6794): Process ended prematurely: osmo-stp_10.42.42.5(pid=6794) [trial-2374↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6794)]