Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=4816): Process ended prematurely: osmo-stp_10.42.42.5(pid=4816) [trial-2374↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4816)]
Standard Output
---------------------------------------------- trial-2374 gprs:trx-umtrx+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 11:57:46.721699 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:57:46.734819 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 11:57:46.899491 tst iperf3.py: using LAC 28233 11:57:47.026499 tst iperf3.py: using RAC 183 11:57:47.169539 tst iperf3.py: using CellId 28233 11:57:47.298101 tst iperf3.py: using BVCI 28234 11:57:47.321103 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:57:47.331913 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:57:47.342646 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:57:47.353864 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:57:47.364567 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:57:47.375559 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:57:47.386580 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:57:47.397452 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:57:47.408347 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 11:57:47.685256 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 11:57:47.808680 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:57:48.116519 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4808): Launched 11:57:48.372513 run iperf3-srv_10.42.42.10(pid=4809): Launched 11:57:48.553521 tst iperf3.py:8: start network... 11:57:48.677601 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:57:49.144460 run create_hlr_db(pid=4810): Launched 11:57:49.316840 bus /gobi_6: Setting Powered False 11:57:50.337868 run create_hlr_db(pid=4810): Terminated: ok {rc=0} 11:57:50.760757 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4812): Launched 11:57:51.079483 run osmo-hlr_10.42.42.2(pid=4813): Launched 11:57:51.200348 run osmo-stp_10.42.42.5: Starting osmo-stp 11:57:51.756043 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4815): Launched 11:57:52.087940 run osmo-stp_10.42.42.5(pid=4816): Launched 11:57:52.203465 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:57:52.761386 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4818): Launched 11:57:52.875227 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:57:53.153893 run patchelf(pid=4819): Launched 11:57:53.340888 run osmo-stp_10.42.42.5(pid=4816): ERR: Terminated: ERROR {rc=1} [trial-2374↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4816)] 11:57:53.477396 run osmo-stp_10.42.42.5(pid=4816): stdout: | (launched: 2022-12-10_11:57:51.932038) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:57:53.614447 run osmo-stp_10.42.42.5(pid=4816): stderr: | �[0;m�[38;5;43m20221210115752124 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210115752124 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210115752124 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210115752124 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210115752127 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210115752127 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210115752127 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:57:53.746740 run osmo-stp_10.42.42.5(pid=4816): stdout: | (launched: 2022-12-10_11:57:51.932038) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:57:53.877282 run osmo-stp_10.42.42.5(pid=4816): stderr: | �[0;m�[38;5;43m20221210115752124 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210115752124 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210115752124 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210115752124 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210115752127 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210115752127 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210115752127 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:57:54.031149 run patchelf(pid=4819): Terminating (SIGINT) 11:57:54.210245 run patchelf(pid=4819): Terminated: ok {rc=0} 11:57:54.243159 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=4816): Process ended prematurely: osmo-stp_10.42.42.5(pid=4816) [trial-2374↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4816)] [trial-2374↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8] 11:57:54.252835 tst iperf3.py:8: Test FAILED (7.6 sec) 11:57:54.315322 run osmo-hlr_10.42.42.2(pid=4813): ERR: Terminated: ERROR {rc=237} [trial-2374↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4813)] 11:57:54.366916 run osmo-hlr_10.42.42.2(pid=4813): stdout: | (launched: 2022-12-10_11:57:50.923880) 11:57:54.418445 run osmo-hlr_10.42.42.2(pid=4813): stderr: | �[0;m�[1;31m20221210115751123 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210115751123 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210115751123 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210115751123 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210115751123 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210115751123 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210115751136 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:trx-umtrx+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210115751144 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210115751144 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210115751145 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:57:54.462419 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4808): Terminating (SIGTERM) 11:57:54.504107 run iperf3-srv_10.42.42.10(pid=4809): Terminating (SIGTERM) 11:57:54.545273 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4812): Terminating (SIGTERM) 11:57:54.586670 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4815): Terminating (SIGTERM) 11:57:54.627989 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4818): Terminating (SIGTERM) 11:57:54.637817 --- ParallelTerminationStrategy: PID 4808 died... 11:57:54.693348 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4808): Terminated: ok {rc=0} 11:57:54.703360 --- ParallelTerminationStrategy: PID 4809 died... 11:57:54.758570 run iperf3-srv_10.42.42.10(pid=4809): Terminated {rc=256} 11:57:54.768446 --- ParallelTerminationStrategy: PID 4812 died... 11:57:54.823713 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4812): Terminated: ok {rc=0} 11:57:54.833837 --- ParallelTerminationStrategy: PID 4815 died... 11:57:54.889122 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4815): Terminated: ok {rc=0} 11:57:54.899511 --- ParallelTerminationStrategy: PID 4818 died... 11:57:54.955085 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4818): Terminated: ok {rc=0} 11:57:55.042977 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4816): Process ended prematurely: osmo-stp_10.42.42.5(pid=4816) [trial-2374↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4816)]