Failed

gprs:sysmo+mod-bts0-dynts-ipa.ping.py (from gprs_sysmo+mod-bts0-dynts-ipa)

Failing for the past 44 builds (Since #2331 )

Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=1834): Process ended prematurely: osmo-stp_10.42.42.5(pid=1834) [trial-2374↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1834)]

Standard Output

----------------------------------------------
trial-2374 gprs:sysmo+mod-bts0-dynts-ipa ping.py
----------------------------------------------
11:23:48.132068 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:23:48.143796 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
11:23:48.288068 tst                          ping.py: using LAC 28051
11:23:48.409202 tst                          ping.py: using RAC 1
11:23:48.530646 tst                          ping.py: using CellId 28051
11:23:48.658604 tst                          ping.py: using BVCI 28052
11:23:48.683840 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:23:48.695526 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:23:48.706843 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:23:48.718582 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:23:48.729624 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:23:48.741991 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:23:48.753513 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:23:48.764737 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
11:23:49.045943 tst                       ping.py:19: start network...
11:23:49.173187 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
11:23:49.656349 run          create_hlr_db(pid=1828): Launched
11:23:49.832928 bus                          /gobi_6: Setting Powered False
11:23:50.854058 run          create_hlr_db(pid=1828): Terminated: ok {rc=0}
11:23:51.289057 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1830): Launched
11:23:51.618038 run    osmo-hlr_10.42.42.2(pid=1831): Launched
11:23:51.736701 run              osmo-stp_10.42.42.5: Starting osmo-stp
11:23:52.311233 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1833): Launched
11:23:52.639221 run    osmo-stp_10.42.42.5(pid=1834): Launched
11:23:52.757663 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
11:23:53.324529 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1836): Launched
11:23:53.440401 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
11:23:53.724937 run               patchelf(pid=1837): Launched
11:23:53.914089 run    osmo-stp_10.42.42.5(pid=1834): ERR: Terminated: ERROR {rc=1}  [trial-2374↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1834)]
11:23:54.052098 run    osmo-stp_10.42.42.5(pid=1834): stdout: 
| (launched: 2022-12-10_11:23:52.477530)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
11:23:54.190688 run    osmo-stp_10.42.42.5(pid=1834): stderr: 
| �[0;m�[38;5;43m20221210112352673 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210112352673 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210112352673 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210112352674 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210112352676 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210112352676 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210112352676 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
11:23:54.324473 run    osmo-stp_10.42.42.5(pid=1834): stdout: 
| (launched: 2022-12-10_11:23:52.477530)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
11:23:54.457973 run    osmo-stp_10.42.42.5(pid=1834): stderr: 
| �[0;m�[38;5;43m20221210112352673 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210112352673 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210112352673 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210112352674 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210112352676 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210112352676 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210112352676 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
11:23:54.612277 run               patchelf(pid=1837): Terminating (SIGINT)
11:23:54.792153 run               patchelf(pid=1837): Terminated: ok {rc=0}
11:23:54.824822 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=1834): Process ended prematurely: osmo-stp_10.42.42.5(pid=1834) [trial-2374↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1834)]  [trial-2374↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22]
11:23:54.834075 tst                       ping.py:22: Test FAILED (6.7 sec)
11:23:54.897025 run    osmo-hlr_10.42.42.2(pid=1831): ERR: Terminated: ERROR {rc=237}  [trial-2374↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1831)]
11:23:54.948086 run    osmo-hlr_10.42.42.2(pid=1831): stdout: 
| (launched: 2022-12-10_11:23:51.455249) 
11:23:54.999744 run    osmo-hlr_10.42.42.2(pid=1831): stderr: 
| �[0;m�[1;31m20221210112351658 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210112351658 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210112351658 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210112351659 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210112351659 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210112351659 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210112351673 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:sysmo+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210112351681 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210112351681 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210112351681 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
11:23:55.043991 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1830): Terminating (SIGTERM)
11:23:55.085844 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1833): Terminating (SIGTERM)
11:23:55.127779 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1836): Terminating (SIGTERM)
11:23:55.137582 ---      ParallelTerminationStrategy: PID 1830 died...
11:23:55.193388 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1830): Terminated: ok {rc=0}
11:23:55.203482 ---      ParallelTerminationStrategy: PID 1833 died...
11:23:55.258827 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1833): Terminated: ok {rc=0}
11:23:55.268867 ---      ParallelTerminationStrategy: PID 1836 died...
11:23:55.324435 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1836): Terminated: ok {rc=0}
11:23:55.411185 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1834): Process ended prematurely: osmo-stp_10.42.42.5(pid=1834) [trial-2374↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1834)]