Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-lms-limenet-micro+mod-bts0-egprs.iperf3.py (from gprs_trx-lms-limenet-micro+mod-bts0-egprs)

Failing for the past 236 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=6698): Process ended prematurely: osmo-stp_10.42.42.5(pid=6698) [trial-2374↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6698)]

Standard Output

----------------------------------------------
trial-2374 gprs:trx-lms-limenet-micro+mod-bts0-egprs iperf3.py
----------------------------------------------
12:12:31.161264 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
12:12:31.177897 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x bts (candidates: 1)
12:12:31.327347 tst                        iperf3.py: using LAC 28312
12:12:31.472660 tst                        iperf3.py: using RAC 7
12:12:31.608057 tst                        iperf3.py: using CellId 28312
12:12:31.765109 tst                        iperf3.py: using BVCI 28313
12:12:31.794739 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
12:12:31.809563 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
12:12:31.825792 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
12:12:31.842601 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
12:12:31.857822 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
12:12:31.873998 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
12:12:31.890122 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
12:12:31.906895 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
12:12:31.919301 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x modem (candidates: 4)
12:12:32.223844 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
12:12:32.358772 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
12:12:32.686045 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6688): Launched
12:12:32.956891 run iperf3-srv_10.42.42.10(pid=6689): Launched
12:12:33.150725 tst                      iperf3.py:8: start network...
12:12:33.282909 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
12:12:33.781881 run          create_hlr_db(pid=6690): Launched
12:12:33.965329 bus                          /gobi_6: Setting Powered False
12:12:34.986265 run          create_hlr_db(pid=6690): Terminated: ok {rc=0}
12:12:35.383943 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6692): Launched
12:12:35.683051 run    osmo-hlr_10.42.42.2(pid=6693): Launched
12:12:35.798120 run              osmo-stp_10.42.42.5: Starting osmo-stp
12:12:36.341918 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6697): Launched
12:12:36.658501 run    osmo-stp_10.42.42.5(pid=6698): Launched
12:12:36.773617 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
12:12:37.321987 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6700): Launched
12:12:37.434742 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
12:12:37.710376 run               patchelf(pid=6701): Launched
12:12:37.895213 run    osmo-stp_10.42.42.5(pid=6698): ERR: Terminated: ERROR {rc=1}  [trial-2374↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6698)]
12:12:38.030537 run    osmo-stp_10.42.42.5(pid=6698): stdout: 
| (launched: 2022-12-10_12:12:36.502779)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
12:12:38.166140 run    osmo-stp_10.42.42.5(pid=6698): stderr: 
| �[0;m�[38;5;43m20221210121236693 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210121236694 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210121236694 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210121236694 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210121236696 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210121236697 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210121236697 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
12:12:38.296804 run    osmo-stp_10.42.42.5(pid=6698): stdout: 
| (launched: 2022-12-10_12:12:36.502779)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
12:12:38.426563 run    osmo-stp_10.42.42.5(pid=6698): stderr: 
| �[0;m�[38;5;43m20221210121236693 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210121236694 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210121236694 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210121236694 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210121236696 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210121236697 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210121236697 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
12:12:38.577265 run               patchelf(pid=6701): Terminating (SIGINT)
12:12:38.754492 run               patchelf(pid=6701): Terminated: ok {rc=0}
12:12:38.787026 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=6698): Process ended prematurely: osmo-stp_10.42.42.5(pid=6698) [trial-2374↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6698)]  [trial-2374↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8]
12:12:38.796690 tst                      iperf3.py:8: Test FAILED (7.7 sec)
12:12:38.859762 run    osmo-hlr_10.42.42.2(pid=6693): ERR: Terminated: ERROR {rc=237}  [trial-2374↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6693)]
12:12:38.911716 run    osmo-hlr_10.42.42.2(pid=6693): stdout: 
| (launched: 2022-12-10_12:12:35.534698) 
12:12:38.963980 run    osmo-hlr_10.42.42.2(pid=6693): stderr: 
| �[0;m�[1;31m20221210121235707 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210121235707 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210121235707 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210121235707 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210121235707 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210121235707 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210121235718 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:trx-lms-limenet-micro+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210121235726 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210121235726 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210121235726 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
12:12:39.008278 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6688): Terminating (SIGTERM)
12:12:39.050142 run iperf3-srv_10.42.42.10(pid=6689): Terminating (SIGTERM)
12:12:39.092328 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6692): Terminating (SIGTERM)
12:12:39.133682 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6697): Terminating (SIGTERM)
12:12:39.175280 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6700): Terminating (SIGTERM)
12:12:39.185161 ---      ParallelTerminationStrategy: PID 6688 died...
12:12:39.241490 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6688): Terminated: ok {rc=0}
12:12:39.251430 ---      ParallelTerminationStrategy: PID 6689 died...
12:12:39.306714 run iperf3-srv_10.42.42.10(pid=6689): Terminated {rc=256}
12:12:39.316647 ---      ParallelTerminationStrategy: PID 6692 died...
12:12:39.372313 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6692): Terminated: ok {rc=0}
12:12:39.382266 ---      ParallelTerminationStrategy: PID 6697 died...
12:12:39.437491 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6697): Terminated: ok {rc=0}
12:12:39.447735 ---      ParallelTerminationStrategy: PID 6700 died...
12:12:39.503157 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6700): Terminated: ok {rc=0}
12:12:39.589932 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6698): Process ended prematurely: osmo-stp_10.42.42.5(pid=6698) [trial-2374↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6698)]