Failed
gprs:nanobts+band-900.iperf3.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=15600): Process ended prematurely: osmo-stp_10.42.42.5(pid=15600) [trial-2375↪gprs:nanobts+band-900↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15600)]
Standard Output
---------------------------------------------- trial-2375 gprs:nanobts+band-900 iperf3.py ---------------------------------------------- 13:51:17.811018 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 13:51:17.822049 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 13:51:17.956792 tst iperf3.py: using LAC 28839 13:51:18.076283 tst iperf3.py: using RAC 24 13:51:18.198411 tst iperf3.py: using CellId 28839 13:51:18.314927 tst iperf3.py: using BVCI 28840 13:51:18.337793 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 13:51:18.348620 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 13:51:18.358988 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 13:51:18.369285 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 13:51:18.379449 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 13:51:18.389611 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 13:51:18.399890 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 13:51:18.410085 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 13:51:18.420409 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 13:51:18.709771 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 13:51:18.843175 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:51:19.171678 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15592): Launched 13:51:19.446200 run iperf3-srv_10.42.42.10(pid=15593): Launched 13:51:19.642093 tst iperf3.py:8: start network... 13:51:19.775851 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:51:20.277283 run create_hlr_db(pid=15594): Launched 13:51:20.461962 bus /gobi_6: Setting Powered False 13:51:21.482206 run create_hlr_db(pid=15594): Terminated: ok {rc=0} 13:51:21.905553 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15596): Launched 13:51:22.225683 run osmo-hlr_10.42.42.2(pid=15597): Launched 13:51:22.345518 run osmo-stp_10.42.42.5: Starting osmo-stp 13:51:22.902304 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15599): Launched 13:51:23.221075 run osmo-stp_10.42.42.5(pid=15600): Launched 13:51:23.337758 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:51:23.891768 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15602): Launched 13:51:24.005474 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:51:24.281678 run patchelf(pid=15603): Launched 13:51:24.467967 run osmo-stp_10.42.42.5(pid=15600): ERR: Terminated: ERROR {rc=1} [trial-2375↪gprs:nanobts+band-900↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15600)] 13:51:24.604064 run osmo-stp_10.42.42.5(pid=15600): stdout: | (launched: 2022-12-10_13:51:23.064298) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:51:24.741042 run osmo-stp_10.42.42.5(pid=15600): stderr: | �[0;m�[38;5;43m20221210135123254 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210135123254 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210135123254 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210135123255 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210135123255 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210135123255 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210135123255 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:51:24.872806 run osmo-stp_10.42.42.5(pid=15600): stdout: | (launched: 2022-12-10_13:51:23.064298) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:51:25.003802 run osmo-stp_10.42.42.5(pid=15600): stderr: | �[0;m�[38;5;43m20221210135123254 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210135123254 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210135123254 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210135123255 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210135123255 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210135123255 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210135123255 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:51:25.156453 run patchelf(pid=15603): Terminating (SIGINT) 13:51:25.335943 run patchelf(pid=15603): Terminated: ok {rc=0} 13:51:25.368806 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=15600): Process ended prematurely: osmo-stp_10.42.42.5(pid=15600) [trial-2375↪gprs:nanobts+band-900↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15600)] [trial-2375↪gprs:nanobts+band-900↪iperf3.py:8] 13:51:25.378637 tst iperf3.py:8: Test FAILED (7.6 sec) 13:51:25.441200 run osmo-hlr_10.42.42.2(pid=15597): ERR: Terminated: ERROR {rc=237} [trial-2375↪gprs:nanobts+band-900↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15597)] 13:51:25.491852 run osmo-hlr_10.42.42.2(pid=15597): stdout: | (launched: 2022-12-10_13:51:22.068622) 13:51:25.543194 run osmo-hlr_10.42.42.2(pid=15597): stderr: | �[0;m�[1;31m20221210135122268 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210135122268 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210135122268 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210135122268 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210135122268 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210135122268 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210135122280 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2375/run.2022-12-10_12-42-03/gprs:nanobts+band-900/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210135122289 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210135122289 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210135122289 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:51:25.586846 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15592): Terminating (SIGTERM) 13:51:25.627762 run iperf3-srv_10.42.42.10(pid=15593): Terminating (SIGTERM) 13:51:25.668935 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15596): Terminating (SIGTERM) 13:51:25.710300 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15599): Terminating (SIGTERM) 13:51:25.751299 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15602): Terminating (SIGTERM) 13:51:25.761025 --- ParallelTerminationStrategy: PID 15592 died... 13:51:25.816177 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15592): Terminated: ok {rc=0} 13:51:25.826184 --- ParallelTerminationStrategy: PID 15593 died... 13:51:25.881341 run iperf3-srv_10.42.42.10(pid=15593): Terminated {rc=256} 13:51:25.891232 --- ParallelTerminationStrategy: PID 15596 died... 13:51:25.946201 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15596): Terminated: ok {rc=0} 13:51:25.956122 --- ParallelTerminationStrategy: PID 15599 died... 13:51:26.011259 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15599): Terminated: ok {rc=0} 13:51:26.021305 --- ParallelTerminationStrategy: PID 15602 died... 13:51:26.076625 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15602): Terminated: ok {rc=0} 13:51:26.161994 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15600): Process ended prematurely: osmo-stp_10.42.42.5(pid=15600) [trial-2375↪gprs:nanobts+band-900↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15600)]