Failed
gprs:trx-b200+mod-bts0-dynts-ipa.iperf3.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=11610): Process ended prematurely: osmo-stp_10.42.42.5(pid=11610) [trial-2375↪gprs:trx-b200+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11610)]
Standard Output
---------------------------------------------- trial-2375 gprs:trx-b200+mod-bts0-dynts-ipa iperf3.py ---------------------------------------------- 13:06:34.298108 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:06:34.309484 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 13:06:34.468514 tst iperf3.py: using LAC 28598 13:06:34.594575 tst iperf3.py: using RAC 38 13:06:34.720021 tst iperf3.py: using CellId 28598 13:06:34.845558 tst iperf3.py: using BVCI 28599 13:06:34.870196 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:06:34.881340 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:06:34.892248 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:06:34.903308 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:06:34.914204 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:06:34.925268 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:06:34.936246 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:06:34.947424 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:06:34.958557 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 13:06:35.246233 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 13:06:35.380474 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:06:35.709380 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11602): Launched 13:06:35.983656 run iperf3-srv_10.42.42.10(pid=11603): Launched 13:06:36.179758 tst iperf3.py:8: start network... 13:06:36.313564 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:06:36.823276 run create_hlr_db(pid=11604): Launched 13:06:37.008374 bus /gobi_6: Setting Powered False 13:06:38.028837 run create_hlr_db(pid=11604): Terminated: ok {rc=0} 13:06:38.428673 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11606): Launched 13:06:38.727689 run osmo-hlr_10.42.42.2(pid=11607): Launched 13:06:38.841568 run osmo-stp_10.42.42.5: Starting osmo-stp 13:06:39.367940 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11609): Launched 13:06:39.668017 run osmo-stp_10.42.42.5(pid=11610): Launched 13:06:39.778031 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:06:40.298231 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11612): Launched 13:06:40.405511 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:06:40.665098 run patchelf(pid=11613): Launched 13:06:40.839536 run osmo-stp_10.42.42.5(pid=11610): ERR: Terminated: ERROR {rc=1} [trial-2375↪gprs:trx-b200+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11610)] 13:06:40.967267 run osmo-stp_10.42.42.5(pid=11610): stdout: | (launched: 2022-12-10_13:06:39.519864) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:06:41.095756 run osmo-stp_10.42.42.5(pid=11610): stderr: | �[0;m�[38;5;43m20221210130639690 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210130639690 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210130639690 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210130639691 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210130639691 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210130639691 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210130639691 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:06:41.219683 run osmo-stp_10.42.42.5(pid=11610): stdout: | (launched: 2022-12-10_13:06:39.519864) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:06:41.342210 run osmo-stp_10.42.42.5(pid=11610): stderr: | �[0;m�[38;5;43m20221210130639690 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210130639690 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210130639690 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210130639691 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210130639691 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210130639691 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210130639691 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:06:41.486308 run patchelf(pid=11613): Terminating (SIGINT) 13:06:41.655082 run patchelf(pid=11613): Terminated: ok {rc=0} 13:06:41.686005 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=11610): Process ended prematurely: osmo-stp_10.42.42.5(pid=11610) [trial-2375↪gprs:trx-b200+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11610)] [trial-2375↪gprs:trx-b200+mod-bts0-dynts-ipa↪iperf3.py:8] 13:06:41.695146 tst iperf3.py:8: Test FAILED (7.4 sec) 13:06:41.755254 run osmo-hlr_10.42.42.2(pid=11607): ERR: Terminated: ERROR {rc=237} [trial-2375↪gprs:trx-b200+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11607)] 13:06:41.803979 run osmo-hlr_10.42.42.2(pid=11607): stdout: | (launched: 2022-12-10_13:06:38.580849) 13:06:41.853334 run osmo-hlr_10.42.42.2(pid=11607): stderr: | �[0;m�[1;31m20221210130638755 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210130638755 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210130638755 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210130638755 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210130638756 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210130638756 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210130638768 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2375/run.2022-12-10_12-42-03/gprs:trx-b200+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210130638778 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210130638779 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210130638779 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:06:41.894879 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11602): Terminating (SIGTERM) 13:06:41.934416 run iperf3-srv_10.42.42.10(pid=11603): Terminating (SIGTERM) 13:06:41.973818 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11606): Terminating (SIGTERM) 13:06:42.013415 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11609): Terminating (SIGTERM) 13:06:42.053192 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11612): Terminating (SIGTERM) 13:06:42.062551 --- ParallelTerminationStrategy: PID 11602 died... 13:06:42.115696 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11602): Terminated: ok {rc=0} 13:06:42.125819 --- ParallelTerminationStrategy: PID 11603 died... 13:06:42.179093 run iperf3-srv_10.42.42.10(pid=11603): Terminated {rc=256} 13:06:42.188509 --- ParallelTerminationStrategy: PID 11606 died... 13:06:42.241135 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11606): Terminated: ok {rc=0} 13:06:42.250835 --- ParallelTerminationStrategy: PID 11609 died... 13:06:42.303658 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11609): Terminated: ok {rc=0} 13:06:42.313400 --- ParallelTerminationStrategy: PID 11612 died... 13:06:42.366352 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11612): Terminated: ok {rc=0} 13:06:42.455291 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11610): Process ended prematurely: osmo-stp_10.42.42.5(pid=11610) [trial-2375↪gprs:trx-b200+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11610)]