Failed
gprs:trx-umtrx+mod-bts0-egprs.iperf3.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=13008): Process ended prematurely: osmo-stp_10.42.42.5(pid=13008) [trial-2375↪gprs:trx-umtrx+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13008)]
Standard Output
---------------------------------------------- trial-2375 gprs:trx-umtrx+mod-bts0-egprs iperf3.py ---------------------------------------------- 13:22:29.340574 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:22:29.352335 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 13:22:29.499981 tst iperf3.py: using LAC 28684 13:22:29.626067 tst iperf3.py: using RAC 124 13:22:29.756773 tst iperf3.py: using CellId 28684 13:22:29.883357 tst iperf3.py: using BVCI 28685 13:22:29.908106 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:22:29.919327 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:22:29.930396 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:22:29.941331 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:22:29.952171 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:22:29.963088 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:22:29.974225 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:22:29.985136 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:22:29.996215 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:22:30.272842 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 13:22:30.398524 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:22:30.708662 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13000): Launched 13:22:31.000492 run iperf3-srv_10.42.42.10(pid=13001): Launched 13:22:31.187670 tst iperf3.py:8: start network... 13:22:31.315787 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:22:31.837153 run create_hlr_db(pid=13002): Launched 13:22:32.012684 bus /gobi_6: Setting Powered False 13:22:33.031091 run create_hlr_db(pid=13002): Terminated: ok {rc=0} 13:22:33.455822 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13004): Launched 13:22:33.776345 run osmo-hlr_10.42.42.2(pid=13005): Launched 13:22:33.893537 run osmo-stp_10.42.42.5: Starting osmo-stp 13:22:34.456916 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13007): Launched 13:22:34.778444 run osmo-stp_10.42.42.5(pid=13008): Launched 13:22:34.895065 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:22:35.455890 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13010): Launched 13:22:35.570363 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:22:35.848819 run patchelf(pid=13011): Launched 13:22:36.038458 run osmo-stp_10.42.42.5(pid=13008): ERR: Terminated: ERROR {rc=1} [trial-2375↪gprs:trx-umtrx+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13008)] 13:22:36.175339 run osmo-stp_10.42.42.5(pid=13008): stdout: | (launched: 2022-12-10_13:22:34.620521) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:22:36.313105 run osmo-stp_10.42.42.5(pid=13008): stderr: | �[0;m�[38;5;43m20221210132234812 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210132234812 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210132234812 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210132234813 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210132234813 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210132234813 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210132234813 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:22:36.446417 run osmo-stp_10.42.42.5(pid=13008): stdout: | (launched: 2022-12-10_13:22:34.620521) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:22:36.578242 run osmo-stp_10.42.42.5(pid=13008): stderr: | �[0;m�[38;5;43m20221210132234812 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210132234812 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210132234812 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210132234813 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210132234813 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210132234813 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210132234813 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:22:36.731325 run patchelf(pid=13011): Terminating (SIGINT) 13:22:36.911124 run patchelf(pid=13011): Terminated: ok {rc=0} 13:22:36.944147 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=13008): Process ended prematurely: osmo-stp_10.42.42.5(pid=13008) [trial-2375↪gprs:trx-umtrx+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13008)] [trial-2375↪gprs:trx-umtrx+mod-bts0-egprs↪iperf3.py:8] 13:22:36.954074 tst iperf3.py:8: Test FAILED (7.6 sec) 13:22:37.016639 run osmo-hlr_10.42.42.2(pid=13005): ERR: Terminated: ERROR {rc=237} [trial-2375↪gprs:trx-umtrx+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13005)] 13:22:37.067236 run osmo-hlr_10.42.42.2(pid=13005): stdout: | (launched: 2022-12-10_13:22:33.619001) 13:22:37.118650 run osmo-hlr_10.42.42.2(pid=13005): stderr: | �[0;m�[1;31m20221210132233816 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210132233816 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210132233816 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210132233816 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210132233816 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210132233816 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210132233829 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2375/run.2022-12-10_12-42-03/gprs:trx-umtrx+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210132233837 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210132233837 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210132233837 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:22:37.162368 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13000): Terminating (SIGTERM) 13:22:37.203537 run iperf3-srv_10.42.42.10(pid=13001): Terminating (SIGTERM) 13:22:37.244721 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13004): Terminating (SIGTERM) 13:22:37.285936 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13007): Terminating (SIGTERM) 13:22:37.327119 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13010): Terminating (SIGTERM) 13:22:37.336757 --- ParallelTerminationStrategy: PID 13000 died... 13:22:37.391674 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13000): Terminated: ok {rc=0} 13:22:37.401775 --- ParallelTerminationStrategy: PID 13001 died... 13:22:37.456597 run iperf3-srv_10.42.42.10(pid=13001): Terminated {rc=256} 13:22:37.466630 --- ParallelTerminationStrategy: PID 13004 died... 13:22:37.521673 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13004): Terminated: ok {rc=0} 13:22:37.531543 --- ParallelTerminationStrategy: PID 13007 died... 13:22:37.586359 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13007): Terminated: ok {rc=0} 13:22:37.596425 --- ParallelTerminationStrategy: PID 13010 died... 13:22:37.651292 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13010): Terminated: ok {rc=0} 13:22:37.737709 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13008): Process ended prematurely: osmo-stp_10.42.42.5(pid=13008) [trial-2375↪gprs:trx-umtrx+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13008)]