Failed
gprs:nanobts+band-900+mod-bts0-egprs.ping.py (from gprs_nanobts+band-900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=26114): Process ended prematurely: osmo-stp_10.42.42.5(pid=26114) [trial-2376↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26114)]
Standard Output
---------------------------------------------- trial-2376 gprs:nanobts+band-900+mod-bts0-egprs ping.py ---------------------------------------------- 16:47:52.037582 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:47:52.049070 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 16:47:52.189282 tst ping.py: using LAC 29307 16:47:52.303487 tst ping.py: using RAC 237 16:47:52.419030 tst ping.py: using CellId 29307 16:47:52.533086 tst ping.py: using BVCI 29308 16:47:52.555430 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:47:52.566495 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:47:52.577340 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:47:52.588305 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:47:52.599187 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:47:52.610305 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:47:52.621635 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:47:52.632485 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 16:47:52.905300 tst ping.py:19: start network... 16:47:53.027360 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:47:53.486751 run create_hlr_db(pid=26108): Launched 16:47:53.655784 bus /gobi_6: Setting Powered False 16:47:54.678219 run create_hlr_db(pid=26108): Terminated: ok {rc=0} 16:47:55.096024 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26110): Launched 16:47:55.410091 run osmo-hlr_10.42.42.2(pid=26111): Launched 16:47:55.529265 run osmo-stp_10.42.42.5: Starting osmo-stp 16:47:56.077225 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26113): Launched 16:47:56.390855 run osmo-stp_10.42.42.5(pid=26114): Launched 16:47:56.505528 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:47:57.056460 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26116): Launched 16:47:57.168604 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:47:57.442313 run patchelf(pid=26117): Launched 16:47:57.626703 run osmo-stp_10.42.42.5(pid=26114): ERR: Terminated: ERROR {rc=1} [trial-2376↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26114)] 16:47:57.761695 run osmo-stp_10.42.42.5(pid=26114): stdout: | (launched: 2022-12-10_16:47:56.236528) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:47:57.896562 run osmo-stp_10.42.42.5(pid=26114): stderr: | �[0;m�[38;5;43m20221210164756428 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210164756428 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210164756429 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210164756429 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210164756430 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210164756430 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210164756430 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:47:58.026648 run osmo-stp_10.42.42.5(pid=26114): stdout: | (launched: 2022-12-10_16:47:56.236528) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:47:58.155476 run osmo-stp_10.42.42.5(pid=26114): stderr: | �[0;m�[38;5;43m20221210164756428 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210164756428 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210164756429 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210164756429 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210164756430 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210164756430 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210164756430 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:47:58.305830 run patchelf(pid=26117): Terminating (SIGINT) 16:47:58.482225 run patchelf(pid=26117): Terminated: ok {rc=0} 16:47:58.514379 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=26114): Process ended prematurely: osmo-stp_10.42.42.5(pid=26114) [trial-2376↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26114)] [trial-2376↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22] 16:47:58.523461 tst ping.py:22: Test FAILED (6.5 sec) 16:47:58.586654 run osmo-hlr_10.42.42.2(pid=26111): ERR: Terminated: ERROR {rc=237} [trial-2376↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26111)] 16:47:58.637817 run osmo-hlr_10.42.42.2(pid=26111): stdout: | (launched: 2022-12-10_16:47:55.255420) 16:47:58.689367 run osmo-hlr_10.42.42.2(pid=26111): stderr: | �[0;m�[1;31m20221210164755450 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210164755450 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210164755450 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210164755451 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210164755451 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210164755451 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210164755463 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2376/run.2022-12-10_15-37-08/gprs:nanobts+band-900+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210164755471 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210164755472 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210164755472 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:47:58.734289 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26110): Terminating (SIGTERM) 16:47:58.776374 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26113): Terminating (SIGTERM) 16:47:58.818369 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26116): Terminating (SIGTERM) 16:47:58.828170 --- ParallelTerminationStrategy: PID 26110 died... 16:47:58.884567 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26110): Terminated: ok {rc=0} 16:47:58.894923 --- ParallelTerminationStrategy: PID 26113 died... 16:47:58.951120 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26113): Terminated: ok {rc=0} 16:47:58.961602 --- ParallelTerminationStrategy: PID 26116 died... 16:47:59.017262 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26116): Terminated: ok {rc=0} 16:47:59.105273 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26114): Process ended prematurely: osmo-stp_10.42.42.5(pid=26114) [trial-2376↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26114)]