Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=22995): Process ended prematurely: osmo-stp_10.42.42.5(pid=22995) [trial-2376↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22995)]
Standard Output
---------------------------------------------- trial-2376 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 16:11:20.533290 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:11:20.545612 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 16:11:20.715055 tst iperf3.py: using LAC 29111 16:11:20.840566 tst iperf3.py: using RAC 41 16:11:20.964456 tst iperf3.py: using CellId 29111 16:11:21.089541 tst iperf3.py: using BVCI 29112 16:11:21.113977 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:11:21.125382 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:11:21.136535 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:11:21.148250 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:11:21.159973 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:11:21.171707 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:11:21.183689 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:11:21.195273 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:11:21.207135 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 16:11:21.482158 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 16:11:21.605939 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:11:21.913770 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22987): Launched 16:11:22.167897 run iperf3-srv_10.42.42.10(pid=22988): Launched 16:11:22.348862 tst iperf3.py:8: start network... 16:11:22.472101 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:11:22.935956 run create_hlr_db(pid=22989): Launched 16:11:23.106074 bus /gobi_6: Setting Powered False 16:11:24.128133 run create_hlr_db(pid=22989): Terminated: ok {rc=0} 16:11:24.549543 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22991): Launched 16:11:24.865413 run osmo-hlr_10.42.42.2(pid=22992): Launched 16:11:24.981704 run osmo-stp_10.42.42.5: Starting osmo-stp 16:11:25.531303 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22994): Launched 16:11:25.847835 run osmo-stp_10.42.42.5(pid=22995): Launched 16:11:25.963038 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:11:26.513310 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22997): Launched 16:11:26.626425 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:11:26.901109 run patchelf(pid=22998): Launched 16:11:27.086457 run osmo-stp_10.42.42.5(pid=22995): ERR: Terminated: ERROR {rc=1} [trial-2376↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22995)] 16:11:27.222356 run osmo-stp_10.42.42.5(pid=22995): stdout: | (launched: 2022-12-10_16:11:25.693192) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:11:27.358399 run osmo-stp_10.42.42.5(pid=22995): stderr: | �[0;m�[38;5;43m20221210161125884 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210161125884 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210161125884 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210161125885 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210161125885 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210161125885 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210161125885 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:11:27.490263 run osmo-stp_10.42.42.5(pid=22995): stdout: | (launched: 2022-12-10_16:11:25.693192) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:11:27.620555 run osmo-stp_10.42.42.5(pid=22995): stderr: | �[0;m�[38;5;43m20221210161125884 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210161125884 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210161125884 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210161125885 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210161125885 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210161125885 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210161125885 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:11:27.772212 run patchelf(pid=22998): Terminating (SIGINT) 16:11:27.949696 run patchelf(pid=22998): Terminated: ok {rc=0} 16:11:27.982470 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=22995): Process ended prematurely: osmo-stp_10.42.42.5(pid=22995) [trial-2376↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22995)] [trial-2376↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8] 16:11:27.992213 tst iperf3.py:8: Test FAILED (7.5 sec) 16:11:28.055018 run osmo-hlr_10.42.42.2(pid=22992): ERR: Terminated: ERROR {rc=237} [trial-2376↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22992)] 16:11:28.106426 run osmo-hlr_10.42.42.2(pid=22992): stdout: | (launched: 2022-12-10_16:11:24.711394) 16:11:28.158428 run osmo-hlr_10.42.42.2(pid=22992): stderr: | �[0;m�[1;31m20221210161124911 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210161124911 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210161124911 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210161124911 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210161124911 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210161124912 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210161124923 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2376/run.2022-12-10_15-37-08/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210161124933 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210161124934 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210161124934 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:11:28.202755 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22987): Terminating (SIGTERM) 16:11:28.244556 run iperf3-srv_10.42.42.10(pid=22988): Terminating (SIGTERM) 16:11:28.286500 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22991): Terminating (SIGTERM) 16:11:28.328342 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22994): Terminating (SIGTERM) 16:11:28.370605 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22997): Terminating (SIGTERM) 16:11:28.380262 --- ParallelTerminationStrategy: PID 22987 died... 16:11:28.436467 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22987): Terminated: ok {rc=0} 16:11:28.446685 --- ParallelTerminationStrategy: PID 22988 died... 16:11:28.502480 run iperf3-srv_10.42.42.10(pid=22988): Terminated {rc=256} 16:11:28.512504 --- ParallelTerminationStrategy: PID 22991 died... 16:11:28.568315 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22991): Terminated: ok {rc=0} 16:11:28.578554 --- ParallelTerminationStrategy: PID 22994 died... 16:11:28.634706 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22994): Terminated: ok {rc=0} 16:11:28.644836 --- ParallelTerminationStrategy: PID 22997 died... 16:11:28.701464 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22997): Terminated: ok {rc=0} 16:11:28.789345 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22995): Process ended prematurely: osmo-stp_10.42.42.5(pid=22995) [trial-2376↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22995)]