Failed
gprs:oc2g+mod-bts0-dynts-osmo.iperf3.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=20970): Process ended prematurely: osmo-stp_10.42.42.5(pid=20970) [trial-2376↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20970)]
Standard Output
---------------------------------------------- trial-2376 gprs:oc2g+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 15:53:57.686300 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:53:57.698277 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 15:53:57.849880 tst iperf3.py: using LAC 29018 15:53:57.973798 tst iperf3.py: using RAC 203 15:53:58.100011 tst iperf3.py: using CellId 29018 15:53:58.219070 tst iperf3.py: using BVCI 29019 15:53:58.242049 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:53:58.253083 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:53:58.263781 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:53:58.274734 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:53:58.285611 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:53:58.296634 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:53:58.307569 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:53:58.318368 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:53:58.329797 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 15:53:58.606875 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 15:53:58.731211 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:53:59.039233 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20962): Launched 15:53:59.295951 run iperf3-srv_10.42.42.10(pid=20963): Launched 15:53:59.478404 tst iperf3.py:8: start network... 15:53:59.602875 run osmo-hlr_10.42.42.2: Starting osmo-hlr 15:54:00.073072 run create_hlr_db(pid=20964): Launched 15:54:00.246035 bus /gobi_6: Setting Powered False 15:54:01.335485 run create_hlr_db(pid=20964): Terminated: ok {rc=0} 15:54:01.762032 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20966): Launched 15:54:02.128211 run osmo-hlr_10.42.42.2(pid=20967): Launched 15:54:02.335124 run osmo-stp_10.42.42.5: Starting osmo-stp 15:54:02.854216 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20969): Launched 15:54:03.153395 run osmo-stp_10.42.42.5(pid=20970): Launched 15:54:03.262592 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 15:54:03.782835 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20972): Launched 15:54:03.889382 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 15:54:04.150053 run patchelf(pid=20973): Launched 15:54:04.325325 run osmo-stp_10.42.42.5(pid=20970): ERR: Terminated: ERROR {rc=1} [trial-2376↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20970)] 15:54:04.454080 run osmo-stp_10.42.42.5(pid=20970): stdout: | (launched: 2022-12-10_15:54:03.006251) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:54:04.583457 run osmo-stp_10.42.42.5(pid=20970): stderr: | �[0;m�[38;5;43m20221210155403178 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210155403178 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210155403179 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210155403179 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210155403179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210155403179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210155403180 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:54:04.707672 run osmo-stp_10.42.42.5(pid=20970): stdout: | (launched: 2022-12-10_15:54:03.006251) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:54:04.830544 run osmo-stp_10.42.42.5(pid=20970): stderr: | �[0;m�[38;5;43m20221210155403178 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210155403178 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210155403179 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210155403179 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210155403179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210155403179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210155403180 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:54:04.974217 run patchelf(pid=20973): Terminating (SIGINT) 15:54:05.143112 run patchelf(pid=20973): Terminated: ok {rc=0} 15:54:05.174173 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=20970): Process ended prematurely: osmo-stp_10.42.42.5(pid=20970) [trial-2376↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20970)] [trial-2376↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8] 15:54:05.183668 tst iperf3.py:8: Test FAILED (7.5 sec) 15:54:05.244010 run osmo-hlr_10.42.42.2(pid=20967): ERR: Terminated: ERROR {rc=237} [trial-2376↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20967)] 15:54:05.293427 run osmo-hlr_10.42.42.2(pid=20967): stdout: | (launched: 2022-12-10_15:54:01.917764) 15:54:05.343127 run osmo-hlr_10.42.42.2(pid=20967): stderr: | �[0;m�[1;31m20221210155402266 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210155402266 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210155402266 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210155402266 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210155402266 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210155402266 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210155402286 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2376/run.2022-12-10_15-37-08/gprs:oc2g+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210155402298 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210155402299 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210155402299 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 15:54:05.384977 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20962): Terminating (SIGTERM) 15:54:05.424584 run iperf3-srv_10.42.42.10(pid=20963): Terminating (SIGTERM) 15:54:05.466107 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20966): Terminating (SIGTERM) 15:54:05.505991 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20969): Terminating (SIGTERM) 15:54:05.546319 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20972): Terminating (SIGTERM) 15:54:05.555444 --- ParallelTerminationStrategy: PID 20962 died... 15:54:05.608910 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20962): Terminated: ok {rc=0} 15:54:05.618835 --- ParallelTerminationStrategy: PID 20963 died... 15:54:05.672103 run iperf3-srv_10.42.42.10(pid=20963): Terminated {rc=256} 15:54:05.681851 --- ParallelTerminationStrategy: PID 20966 died... 15:54:05.734743 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20966): Terminated: ok {rc=0} 15:54:05.744343 --- ParallelTerminationStrategy: PID 20969 died... 15:54:05.797592 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20969): Terminated: ok {rc=0} 15:54:05.807407 --- ParallelTerminationStrategy: PID 20972 died... 15:54:05.861035 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20972): Terminated: ok {rc=0} 15:54:05.950117 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20970): Process ended prematurely: osmo-stp_10.42.42.5(pid=20970) [trial-2376↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20970)]