Failed
gprs:trx-b200+mod-bts0-dynts-ipa.iperf3.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=22034): Process ended prematurely: osmo-stp_10.42.42.5(pid=22034) [trial-2376↪gprs:trx-b200+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22034)]
Standard Output
---------------------------------------------- trial-2376 gprs:trx-b200+mod-bts0-dynts-ipa iperf3.py ---------------------------------------------- 16:01:27.799991 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:27.811818 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 16:01:27.972825 tst iperf3.py: using LAC 29059 16:01:28.091178 tst iperf3.py: using RAC 244 16:01:28.215065 tst iperf3.py: using CellId 29059 16:01:28.335110 tst iperf3.py: using BVCI 29060 16:01:28.358283 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:28.369343 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:28.379956 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:28.391160 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:28.402058 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:28.413095 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:28.424222 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:28.435177 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:28.446431 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 16:01:28.725373 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 16:01:28.851535 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:01:29.165482 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22026): Launched 16:01:29.426281 run iperf3-srv_10.42.42.10(pid=22027): Launched 16:01:29.611861 tst iperf3.py:8: start network... 16:01:29.738420 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:01:30.213597 run create_hlr_db(pid=22028): Launched 16:01:30.388252 bus /gobi_6: Setting Powered False 16:01:31.413774 run create_hlr_db(pid=22028): Terminated: ok {rc=0} 16:01:31.843127 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22030): Launched 16:01:32.181636 run osmo-hlr_10.42.42.2(pid=22031): Launched 16:01:32.298049 run osmo-stp_10.42.42.5: Starting osmo-stp 16:01:32.827698 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22033): Launched 16:01:33.130329 run osmo-stp_10.42.42.5(pid=22034): Launched 16:01:33.240738 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:01:33.771665 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22036): Launched 16:01:33.880714 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:01:34.146098 run patchelf(pid=22037): Launched 16:01:34.324097 run osmo-stp_10.42.42.5(pid=22034): ERR: Terminated: ERROR {rc=1} [trial-2376↪gprs:trx-b200+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22034)] 16:01:34.454736 run osmo-stp_10.42.42.5(pid=22034): stdout: | (launched: 2022-12-10_16:01:32.981803) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:01:34.585596 run osmo-stp_10.42.42.5(pid=22034): stderr: | �[0;m�[38;5;43m20221210160133151 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210160133151 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210160133151 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210160133152 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210160133154 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210160133154 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210160133154 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:01:34.712016 run osmo-stp_10.42.42.5(pid=22034): stdout: | (launched: 2022-12-10_16:01:32.981803) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:01:34.837552 run osmo-stp_10.42.42.5(pid=22034): stderr: | �[0;m�[38;5;43m20221210160133151 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210160133151 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210160133151 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210160133152 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210160133154 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210160133154 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210160133154 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:01:34.983159 run patchelf(pid=22037): Terminating (SIGINT) 16:01:35.154554 run patchelf(pid=22037): Terminated: ok {rc=0} 16:01:35.186061 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=22034): Process ended prematurely: osmo-stp_10.42.42.5(pid=22034) [trial-2376↪gprs:trx-b200+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22034)] [trial-2376↪gprs:trx-b200+mod-bts0-dynts-ipa↪iperf3.py:8] 16:01:35.195505 tst iperf3.py:8: Test FAILED (7.4 sec) 16:01:35.256936 run osmo-hlr_10.42.42.2(pid=22031): ERR: Terminated: ERROR {rc=237} [trial-2376↪gprs:trx-b200+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22031)] 16:01:35.306624 run osmo-hlr_10.42.42.2(pid=22031): stdout: | (launched: 2022-12-10_16:01:32.005263) 16:01:35.357058 run osmo-hlr_10.42.42.2(pid=22031): stderr: | �[0;m�[1;31m20221210160132272 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210160132272 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210160132272 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210160132272 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210160132272 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210160132272 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210160132284 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2376/run.2022-12-10_15-37-08/gprs:trx-b200+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210160132292 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210160132293 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210160132293 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:01:35.399667 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22026): Terminating (SIGTERM) 16:01:35.440293 run iperf3-srv_10.42.42.10(pid=22027): Terminating (SIGTERM) 16:01:35.480431 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22030): Terminating (SIGTERM) 16:01:35.521019 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22033): Terminating (SIGTERM) 16:01:35.561984 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22036): Terminating (SIGTERM) 16:01:35.571603 --- ParallelTerminationStrategy: PID 22026 died... 16:01:35.626010 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22026): Terminated: ok {rc=0} 16:01:35.635807 --- ParallelTerminationStrategy: PID 22027 died... 16:01:35.689937 run iperf3-srv_10.42.42.10(pid=22027): Terminated {rc=256} 16:01:35.699620 --- ParallelTerminationStrategy: PID 22030 died... 16:01:35.753426 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22030): Terminated: ok {rc=0} 16:01:35.763213 --- ParallelTerminationStrategy: PID 22033 died... 16:01:35.816654 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22033): Terminated: ok {rc=0} 16:01:35.826663 --- ParallelTerminationStrategy: PID 22036 died... 16:01:35.880279 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22036): Terminated: ok {rc=0} 16:01:35.964326 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22034): Process ended prematurely: osmo-stp_10.42.42.5(pid=22034) [trial-2376↪gprs:trx-b200+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22034)]