ping_idle_ping.py gprs:sysmo

Failing for the past 49 builds since #2331

Took 8 sec (from gprs_sysmo)

Stack Trace

osmo-stp_10.42.42.5(pid=26938): Process ended prematurely: osmo-stp_10.42.42.5(pid=26938) [trial-2379↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26938)]

Standard Output


----------------------------------------------
trial-2379 gprs:sysmo ping_idle_ping.py
----------------------------------------------
16:12:57.633418 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
16:12:57.645315 tst                       gprs:sysmo: Using 1 x bts (candidates: 1)
16:12:57.770636 tst                ping_idle_ping.py: using LAC 30000
16:12:57.892883 tst                ping_idle_ping.py: using RAC 165
16:12:58.021278 tst                ping_idle_ping.py: using CellId 30000
16:12:58.151208 tst                ping_idle_ping.py: using BVCI 30001
16:12:58.176231 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
16:12:58.187334 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
16:12:58.198382 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
16:12:58.210208 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
16:12:58.221861 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
16:12:58.233401 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
16:12:58.245316 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
16:12:58.257185 tst                       gprs:sysmo: Using 1 x modem (candidates: 4)
16:12:58.561984 tst             ping_idle_ping.py:24: start network...
16:12:58.699106 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
16:12:59.212926 run         create_hlr_db(pid=26932): Launched
16:12:59.402738 bus                          /gobi_6: Setting Powered False
16:13:00.422513 run         create_hlr_db(pid=26932): Terminated: ok {rc=0}
16:13:00.877591 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26934): Launched
16:13:01.317383 run   osmo-hlr_10.42.42.2(pid=26935): Launched
16:13:01.668048 run              osmo-stp_10.42.42.5: Starting osmo-stp
16:13:02.270659 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26937): Launched
16:13:02.599018 run   osmo-stp_10.42.42.5(pid=26938): Launched
16:13:02.718176 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
16:13:03.289099 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26940): Launched
16:13:03.406002 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
16:13:03.693840 run              patchelf(pid=26941): Launched
16:13:03.884461 run   osmo-stp_10.42.42.5(pid=26938): ERR: Terminated: ERROR {rc=1}  [trial-2379↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26938)]
16:13:04.024348 run   osmo-stp_10.42.42.5(pid=26938): stdout: 
| (launched: 2022-12-12_16:13:02.437347)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
16:13:04.164401 run   osmo-stp_10.42.42.5(pid=26938): stderr: 
| �[0;m�[38;5;43m20221212161302627 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212161302628 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212161302628 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212161302628 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212161302629 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212161302629 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212161302629 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
16:13:04.299493 run   osmo-stp_10.42.42.5(pid=26938): stdout: 
| (launched: 2022-12-12_16:13:02.437347)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
16:13:04.433835 run   osmo-stp_10.42.42.5(pid=26938): stderr: 
| �[0;m�[38;5;43m20221212161302627 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212161302628 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212161302628 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212161302628 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212161302629 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212161302629 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212161302629 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
16:13:04.589389 run              patchelf(pid=26941): Terminating (SIGINT)
16:13:04.770900 run              patchelf(pid=26941): Terminated: ok {rc=0}
16:13:04.803853 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=26938): Process ended prematurely: osmo-stp_10.42.42.5(pid=26938) [trial-2379↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26938)]  [trial-2379↪gprs:sysmo↪ping_idle_ping.py:27]
16:13:04.813130 tst             ping_idle_ping.py:27: Test FAILED (7.2 sec)
16:13:04.876715 run   osmo-hlr_10.42.42.2(pid=26935): ERR: Terminated: ERROR {rc=237}  [trial-2379↪gprs:sysmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26935)]
16:13:04.928425 run   osmo-hlr_10.42.42.2(pid=26935): stdout: 
| (launched: 2022-12-12_16:13:01.067091) 
16:13:04.980744 run   osmo-hlr_10.42.42.2(pid=26935): stderr: 
| �[0;m�[1;31m20221212161301385 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221212161301385 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221212161301385 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221212161301385 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221212161301385 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221212161301385 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221212161301404 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2379/run.2022-12-12_16-06-15/gprs:sysmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221212161301422 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212161301423 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212161301423 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
16:13:05.024978 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26934): Terminating (SIGTERM)
16:13:05.066992 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26937): Terminating (SIGTERM)
16:13:05.109147 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26940): Terminating (SIGTERM)
16:13:05.119132 ---      ParallelTerminationStrategy: PID 26934 died...
16:13:05.175205 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26934): Terminated: ok {rc=0}
16:13:05.185231 ---      ParallelTerminationStrategy: PID 26937 died...
16:13:05.241134 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26937): Terminated: ok {rc=0}
16:13:05.251178 ---      ParallelTerminationStrategy: PID 26940 died...
16:13:05.307236 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26940): Terminated: ok {rc=0}
16:13:05.393428 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26938): Process ended prematurely: osmo-stp_10.42.42.5(pid=26938) [trial-2379↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26938)]