Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:nanobts+band-900.ping.py (from gprs_nanobts+band-900)

Failing for the past 54 builds (Since #2326 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=566): Process ended prematurely: osmo-stp_10.42.42.5(pid=566) [trial-2379↪gprs:nanobts+band-900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=566)]

Standard Output

----------------------------------------------
trial-2379 gprs:nanobts+band-900 ping.py
----------------------------------------------
17:17:05.442499 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
17:17:05.454066 tst            gprs:nanobts+band-900: Using 1 x bts (candidates: 1)
17:17:05.594471 tst                          ping.py: using LAC 30338
17:17:05.719732 tst                          ping.py: using RAC 248
17:17:05.845742 tst                          ping.py: using CellId 30338
17:17:05.971213 tst                          ping.py: using BVCI 30339
17:17:05.995384 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
17:17:06.006581 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
17:17:06.017545 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
17:17:06.028540 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
17:17:06.039392 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
17:17:06.050266 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
17:17:06.061515 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
17:17:06.072472 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
17:17:06.357691 tst                       ping.py:19: start network...
17:17:06.488330 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
17:17:06.991380 run           create_hlr_db(pid=560): Launched
17:17:07.173951 bus                          /gobi_6: Setting Powered False
17:17:08.194427 run           create_hlr_db(pid=560): Terminated: ok {rc=0}
17:17:08.589109 run pcap-recorder_any(filters='host 10.42.42.2')(pid=562): Launched
17:17:08.883086 run     osmo-hlr_10.42.42.2(pid=563): Launched
17:17:08.994630 run              osmo-stp_10.42.42.5: Starting osmo-stp
17:17:09.507878 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=565): Launched
17:17:09.801395 run     osmo-stp_10.42.42.5(pid=566): Launched
17:17:09.907643 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
17:17:10.420330 run pcap-recorder_any(filters='host 10.42.42.6')(pid=568): Launched
17:17:10.524484 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
17:17:10.781986 run                patchelf(pid=569): Launched
17:17:10.953740 run     osmo-stp_10.42.42.5(pid=566): ERR: Terminated: ERROR {rc=1}  [trial-2379↪gprs:nanobts+band-900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=566)]
17:17:11.079174 run     osmo-stp_10.42.42.5(pid=566): stdout: 
| (launched: 2022-12-12_17:17:09.655623)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
17:17:11.205137 run     osmo-stp_10.42.42.5(pid=566): stderr: 
| �[0;m�[38;5;43m20221212171709821 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212171709821 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212171709821 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212171709822 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212171709822 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212171709822 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212171709822 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
17:17:11.326909 run     osmo-stp_10.42.42.5(pid=566): stdout: 
| (launched: 2022-12-12_17:17:09.655623)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
17:17:11.447276 run     osmo-stp_10.42.42.5(pid=566): stderr: 
| �[0;m�[38;5;43m20221212171709821 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212171709821 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212171709821 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212171709822 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212171709822 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212171709822 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212171709822 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
17:17:11.586901 run                patchelf(pid=569): Terminating (SIGINT)
17:17:11.750998 run                patchelf(pid=569): Terminated: ok {rc=0}
17:17:11.781321 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=566): Process ended prematurely: osmo-stp_10.42.42.5(pid=566) [trial-2379↪gprs:nanobts+band-900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=566)]  [trial-2379↪gprs:nanobts+band-900↪ping.py:22]
17:17:11.790032 tst                       ping.py:22: Test FAILED (6.3 sec)
17:17:11.849601 run     osmo-hlr_10.42.42.2(pid=563): ERR: Terminated: ERROR {rc=237}  [trial-2379↪gprs:nanobts+band-900↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=563)]
17:17:11.898353 run     osmo-hlr_10.42.42.2(pid=563): stdout: 
| (launched: 2022-12-12_17:17:08.737774) 
17:17:11.947300 run     osmo-hlr_10.42.42.2(pid=563): stderr: 
| �[0;m�[1;31m20221212171708908 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221212171708909 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221212171708909 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221212171708909 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221212171708909 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221212171708909 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221212171708921 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2379/run.2022-12-12_16-06-15/gprs:nanobts+band-900/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221212171708930 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212171708930 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212171708930 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
17:17:11.988941 run pcap-recorder_any(filters='host 10.42.42.2')(pid=562): Terminating (SIGTERM)
17:17:12.028002 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=565): Terminating (SIGTERM)
17:17:12.067046 run pcap-recorder_any(filters='host 10.42.42.6')(pid=568): Terminating (SIGTERM)
17:17:12.076509 ---      ParallelTerminationStrategy: PID 562 died...
17:17:12.129091 run pcap-recorder_any(filters='host 10.42.42.2')(pid=562): Terminated: ok {rc=0}
17:17:12.138597 ---      ParallelTerminationStrategy: PID 565 died...
17:17:12.191325 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=565): Terminated: ok {rc=0}
17:17:12.201242 ---      ParallelTerminationStrategy: PID 568 died...
17:17:12.253724 run pcap-recorder_any(filters='host 10.42.42.6')(pid=568): Terminated: ok {rc=0}
17:17:12.341262 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=566): Process ended prematurely: osmo-stp_10.42.42.5(pid=566) [trial-2379↪gprs:nanobts+band-900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=566)]