Failed
gprs:nanobts+band-1900+mod-bts0-egprs.iperf3.py (from gprs_nanobts+band-1900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=14538): Process ended prematurely: osmo-stp_10.42.42.5(pid=14538) [trial-2380↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14538)]
Standard Output
---------------------------------------------- trial-2380 gprs:nanobts+band-1900+mod-bts0-egprs iperf3.py ---------------------------------------------- 18:46:21.230869 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:46:21.243072 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 18:46:21.382747 tst iperf3.py: using LAC 30769 18:46:21.509688 tst iperf3.py: using RAC 169 18:46:21.638225 tst iperf3.py: using CellId 30769 18:46:21.765434 tst iperf3.py: using BVCI 30770 18:46:21.790356 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:46:21.802009 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:46:21.813339 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:46:21.824622 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:46:21.835949 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:46:21.847239 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:46:21.858765 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:46:21.870024 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:46:21.881563 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 18:46:22.162552 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 18:46:22.290438 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:46:22.609860 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14530): Launched 18:46:22.874433 run iperf3-srv_10.42.42.10(pid=14531): Launched 18:46:23.061647 tst iperf3.py:8: start network... 18:46:23.189735 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:46:23.672168 run create_hlr_db(pid=14532): Launched 18:46:23.848281 bus /gobi_6: Setting Powered False 18:46:24.869948 run create_hlr_db(pid=14532): Terminated: ok {rc=0} 18:46:25.304176 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14534): Launched 18:46:25.632707 run osmo-hlr_10.42.42.2(pid=14535): Launched 18:46:25.752519 run osmo-stp_10.42.42.5: Starting osmo-stp 18:46:26.321972 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14537): Launched 18:46:26.651645 run osmo-stp_10.42.42.5(pid=14538): Launched 18:46:26.769666 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:46:27.339009 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14540): Launched 18:46:27.455112 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:46:27.742118 run patchelf(pid=14541): Launched 18:46:27.932790 run osmo-stp_10.42.42.5(pid=14538): ERR: Terminated: ERROR {rc=1} [trial-2380↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14538)] 18:46:28.071371 run osmo-stp_10.42.42.5(pid=14538): stdout: | (launched: 2022-12-12_18:46:26.488262) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:46:28.211410 run osmo-stp_10.42.42.5(pid=14538): stderr: | �[0;m�[38;5;43m20221212184626679 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212184626679 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212184626679 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212184626679 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212184626680 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212184626680 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212184626680 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:46:28.345833 run osmo-stp_10.42.42.5(pid=14538): stdout: | (launched: 2022-12-12_18:46:26.488262) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:46:28.479523 run osmo-stp_10.42.42.5(pid=14538): stderr: | �[0;m�[38;5;43m20221212184626679 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212184626679 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212184626679 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212184626679 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212184626680 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212184626680 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212184626680 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:46:28.635769 run patchelf(pid=14541): Terminating (SIGINT) 18:46:28.818542 run patchelf(pid=14541): Terminated: ok {rc=0} 18:46:28.852071 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=14538): Process ended prematurely: osmo-stp_10.42.42.5(pid=14538) [trial-2380↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14538)] [trial-2380↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8] 18:46:28.862071 tst iperf3.py:8: Test FAILED (7.7 sec) 18:46:28.925371 run osmo-hlr_10.42.42.2(pid=14535): ERR: Terminated: ERROR {rc=237} [trial-2380↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14535)] 18:46:28.976802 run osmo-hlr_10.42.42.2(pid=14535): stdout: | (launched: 2022-12-12_18:46:25.470763) 18:46:29.028866 run osmo-hlr_10.42.42.2(pid=14535): stderr: | �[0;m�[1;31m20221212184625666 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212184625667 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212184625667 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212184625667 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212184625667 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212184625667 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212184625679 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/gprs:nanobts+band-1900+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212184625690 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212184625690 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212184625690 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:46:29.073477 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14530): Terminating (SIGTERM) 18:46:29.115583 run iperf3-srv_10.42.42.10(pid=14531): Terminating (SIGTERM) 18:46:29.157799 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14534): Terminating (SIGTERM) 18:46:29.199839 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14537): Terminating (SIGTERM) 18:46:29.241865 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14540): Terminating (SIGTERM) 18:46:29.251695 --- ParallelTerminationStrategy: PID 14530 died... 18:46:29.307736 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14530): Terminated: ok {rc=0} 18:46:29.317929 --- ParallelTerminationStrategy: PID 14531 died... 18:46:29.373946 run iperf3-srv_10.42.42.10(pid=14531): Terminated {rc=256} 18:46:29.384314 --- ParallelTerminationStrategy: PID 14534 died... 18:46:29.440253 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14534): Terminated: ok {rc=0} 18:46:29.450445 --- ParallelTerminationStrategy: PID 14537 died... 18:46:29.506717 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14537): Terminated: ok {rc=0} 18:46:29.516866 --- ParallelTerminationStrategy: PID 14540 died... 18:46:29.572865 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14540): Terminated: ok {rc=0} 18:46:29.661093 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14538): Process ended prematurely: osmo-stp_10.42.42.5(pid=14538) [trial-2380↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14538)]