Failed
gprs:nanobts+band-1900.ping.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=14498): Process ended prematurely: osmo-stp_10.42.42.5(pid=14498) [trial-2380↪gprs:nanobts+band-1900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14498)]
Standard Output
---------------------------------------------- trial-2380 gprs:nanobts+band-1900 ping.py ---------------------------------------------- 18:45:50.576131 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 18:45:50.589181 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 18:45:50.717796 tst ping.py: using LAC 30766 18:45:50.831976 tst ping.py: using RAC 166 18:45:50.946789 tst ping.py: using CellId 30766 18:45:51.061743 tst ping.py: using BVCI 30767 18:45:51.084339 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 18:45:51.095442 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 18:45:51.106171 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 18:45:51.117177 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 18:45:51.127915 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 18:45:51.138716 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 18:45:51.149786 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 18:45:51.160623 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 18:45:51.452194 tst ping.py:19: start network... 18:45:51.586183 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:45:52.100335 run create_hlr_db(pid=14492): Launched 18:45:52.286267 bus /gobi_6: Setting Powered False 18:45:53.306817 run create_hlr_db(pid=14492): Terminated: ok {rc=0} 18:45:53.736539 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14494): Launched 18:45:54.059043 run osmo-hlr_10.42.42.2(pid=14495): Launched 18:45:54.177912 run osmo-stp_10.42.42.5: Starting osmo-stp 18:45:54.743488 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14497): Launched 18:45:55.066797 run osmo-stp_10.42.42.5(pid=14498): Launched 18:45:55.182860 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:45:55.746827 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14500): Launched 18:45:55.860517 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:45:56.141891 run patchelf(pid=14501): Launched 18:45:56.328205 run osmo-stp_10.42.42.5(pid=14498): ERR: Terminated: ERROR {rc=1} [trial-2380↪gprs:nanobts+band-1900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14498)] 18:45:56.466050 run osmo-stp_10.42.42.5(pid=14498): stdout: | (launched: 2022-12-12_18:45:54.906709) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:45:56.602477 run osmo-stp_10.42.42.5(pid=14498): stderr: | �[0;m�[38;5;43m20221212184555098 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212184555098 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212184555099 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212184555099 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212184555099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212184555099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212184555099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:45:56.734759 run osmo-stp_10.42.42.5(pid=14498): stdout: | (launched: 2022-12-12_18:45:54.906709) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:45:56.865259 run osmo-stp_10.42.42.5(pid=14498): stderr: | �[0;m�[38;5;43m20221212184555098 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212184555098 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212184555099 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212184555099 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212184555099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212184555099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212184555099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:45:57.017582 run patchelf(pid=14501): Terminating (SIGINT) 18:45:57.196066 run patchelf(pid=14501): Terminated: ok {rc=0} 18:45:57.228715 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=14498): Process ended prematurely: osmo-stp_10.42.42.5(pid=14498) [trial-2380↪gprs:nanobts+band-1900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14498)] [trial-2380↪gprs:nanobts+band-1900↪ping.py:22] 18:45:57.237987 tst ping.py:22: Test FAILED (6.7 sec) 18:45:57.301098 run osmo-hlr_10.42.42.2(pid=14495): ERR: Terminated: ERROR {rc=237} [trial-2380↪gprs:nanobts+band-1900↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14495)] 18:45:57.352699 run osmo-hlr_10.42.42.2(pid=14495): stdout: | (launched: 2022-12-12_18:45:53.899337) 18:45:57.404768 run osmo-hlr_10.42.42.2(pid=14495): stderr: | �[0;m�[1;31m20221212184554097 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212184554097 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212184554097 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212184554097 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212184554098 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212184554098 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212184554110 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/gprs:nanobts+band-1900/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212184554119 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212184554119 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212184554119 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:45:57.450100 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14494): Terminating (SIGTERM) 18:45:57.492323 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14497): Terminating (SIGTERM) 18:45:57.534422 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14500): Terminating (SIGTERM) 18:45:57.544295 --- ParallelTerminationStrategy: PID 14494 died... 18:45:57.600458 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14494): Terminated: ok {rc=0} 18:45:57.610643 --- ParallelTerminationStrategy: PID 14497 died... 18:45:57.666478 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14497): Terminated: ok {rc=0} 18:45:57.676612 --- ParallelTerminationStrategy: PID 14500 died... 18:45:57.733038 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14500): Terminated: ok {rc=0} 18:45:57.820678 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14498): Process ended prematurely: osmo-stp_10.42.42.5(pid=14498) [trial-2380↪gprs:nanobts+band-1900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14498)]