Failed
gprs:trx-lms+mod-bts0-dynts-ipa.iperf3.py (from gprs_trx-lms+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=13284): Process ended prematurely: osmo-stp_10.42.42.5(pid=13284) [trial-2380↪gprs:trx-lms+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13284)]
Standard Output
---------------------------------------------- trial-2380 gprs:trx-lms+mod-bts0-dynts-ipa iperf3.py ---------------------------------------------- 18:32:14.624004 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:32:14.636167 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 18:32:14.797817 tst iperf3.py: using LAC 30694 18:32:14.916372 tst iperf3.py: using RAC 94 18:32:15.042689 tst iperf3.py: using CellId 30694 18:32:15.175372 tst iperf3.py: using BVCI 30695 18:32:15.200456 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:32:15.211979 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:32:15.223447 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:32:15.234991 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:32:15.246113 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:32:15.257269 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:32:15.268411 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:32:15.279523 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:32:15.290898 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 18:32:15.569584 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 18:32:15.696140 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:32:16.064313 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13276): Launched 18:32:16.358418 run iperf3-srv_10.42.42.10(pid=13277): Launched 18:32:16.547949 tst iperf3.py:8: start network... 18:32:16.677079 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:32:17.208010 run create_hlr_db(pid=13278): Launched 18:32:17.397300 bus /gobi_6: Setting Powered False 18:32:18.417445 run create_hlr_db(pid=13278): Terminated: ok {rc=0} 18:32:18.851347 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13280): Launched 18:32:19.177421 run osmo-hlr_10.42.42.2(pid=13281): Launched 18:32:19.297375 run osmo-stp_10.42.42.5: Starting osmo-stp 18:32:19.863748 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13283): Launched 18:32:20.188410 run osmo-stp_10.42.42.5(pid=13284): Launched 18:32:20.304521 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:32:20.870415 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13286): Launched 18:32:20.985817 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:32:21.269295 run patchelf(pid=13287): Launched 18:32:21.458542 run osmo-stp_10.42.42.5(pid=13284): ERR: Terminated: ERROR {rc=1} [trial-2380↪gprs:trx-lms+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13284)] 18:32:21.596686 run osmo-stp_10.42.42.5(pid=13284): stdout: | (launched: 2022-12-12_18:32:20.029196) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:32:21.735187 run osmo-stp_10.42.42.5(pid=13284): stderr: | �[0;m�[38;5;43m20221212183220219 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212183220219 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212183220220 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212183220220 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212183220221 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212183220221 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212183220221 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:32:21.868847 run osmo-stp_10.42.42.5(pid=13284): stdout: | (launched: 2022-12-12_18:32:20.029196) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:32:22.002334 run osmo-stp_10.42.42.5(pid=13284): stderr: | �[0;m�[38;5;43m20221212183220219 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212183220219 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212183220220 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212183220220 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212183220221 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212183220221 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212183220221 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:32:22.157419 run patchelf(pid=13287): Terminating (SIGINT) 18:32:22.338427 run patchelf(pid=13287): Terminated: ok {rc=0} 18:32:22.371814 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=13284): Process ended prematurely: osmo-stp_10.42.42.5(pid=13284) [trial-2380↪gprs:trx-lms+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13284)] [trial-2380↪gprs:trx-lms+mod-bts0-dynts-ipa↪iperf3.py:8] 18:32:22.381725 tst iperf3.py:8: Test FAILED (7.8 sec) 18:32:22.444543 run osmo-hlr_10.42.42.2(pid=13281): ERR: Terminated: ERROR {rc=237} [trial-2380↪gprs:trx-lms+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13281)] 18:32:22.495684 run osmo-hlr_10.42.42.2(pid=13281): stdout: | (launched: 2022-12-12_18:32:19.016857) 18:32:22.547459 run osmo-hlr_10.42.42.2(pid=13281): stderr: | �[0;m�[1;31m20221212183219211 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212183219212 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212183219212 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212183219212 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212183219212 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212183219212 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212183219229 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/gprs:trx-lms+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212183219239 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212183219239 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212183219239 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:32:22.591972 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13276): Terminating (SIGTERM) 18:32:22.633705 run iperf3-srv_10.42.42.10(pid=13277): Terminating (SIGTERM) 18:32:22.675613 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13280): Terminating (SIGTERM) 18:32:22.717533 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13283): Terminating (SIGTERM) 18:32:22.759244 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13286): Terminating (SIGTERM) 18:32:22.769138 --- ParallelTerminationStrategy: PID 13276 died... 18:32:22.825167 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13276): Terminated: ok {rc=0} 18:32:22.835452 --- ParallelTerminationStrategy: PID 13277 died... 18:32:22.890827 run iperf3-srv_10.42.42.10(pid=13277): Terminated {rc=256} 18:32:22.900824 --- ParallelTerminationStrategy: PID 13280 died... 18:32:22.956385 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13280): Terminated: ok {rc=0} 18:32:22.966578 --- ParallelTerminationStrategy: PID 13283 died... 18:32:23.022493 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13283): Terminated: ok {rc=0} 18:32:23.032752 --- ParallelTerminationStrategy: PID 13286 died... 18:32:23.089043 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13286): Terminated: ok {rc=0} 18:32:23.177436 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13284): Process ended prematurely: osmo-stp_10.42.42.5(pid=13284) [trial-2380↪gprs:trx-lms+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13284)]