Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:sysmo.ping_idle_ping.py (from gprs_sysmo)

Failing for the past 51 builds (Since #2331 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=17944): Process ended prematurely: osmo-stp_10.42.42.5(pid=17944) [trial-2381↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17944)]

Standard Output

----------------------------------------------
trial-2381 gprs:sysmo ping_idle_ping.py
----------------------------------------------
19:15:47.755225 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
19:15:47.766577 tst                       gprs:sysmo: Using 1 x bts (candidates: 1)
19:15:47.904524 tst                ping_idle_ping.py: using LAC 30922
19:15:48.021346 tst                ping_idle_ping.py: using RAC 67
19:15:48.139330 tst                ping_idle_ping.py: using CellId 30922
19:15:48.257729 tst                ping_idle_ping.py: using BVCI 30923
19:15:48.280362 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
19:15:48.291069 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
19:15:48.302152 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
19:15:48.313341 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
19:15:48.324115 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
19:15:48.334886 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
19:15:48.345933 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
19:15:48.356791 tst                       gprs:sysmo: Using 1 x modem (candidates: 4)
19:15:48.638736 tst             ping_idle_ping.py:24: start network...
19:15:48.763025 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
19:15:49.237686 run         create_hlr_db(pid=17938): Launched
19:15:49.409615 bus                          /gobi_6: Setting Powered False
19:15:50.431809 run         create_hlr_db(pid=17938): Terminated: ok {rc=0}
19:15:50.831818 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17940): Launched
19:15:51.130068 run   osmo-hlr_10.42.42.2(pid=17941): Launched
19:15:51.238719 run              osmo-stp_10.42.42.5: Starting osmo-stp
19:15:51.757261 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17943): Launched
19:15:52.055265 run   osmo-stp_10.42.42.5(pid=17944): Launched
19:15:52.163133 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
19:15:52.685935 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17946): Launched
19:15:52.792181 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
19:15:53.054013 run              patchelf(pid=17947): Launched
19:15:53.228682 run   osmo-stp_10.42.42.5(pid=17944): ERR: Terminated: ERROR {rc=1}  [trial-2381↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17944)]
19:15:53.356814 run   osmo-stp_10.42.42.5(pid=17944): stdout: 
| (launched: 2022-12-12_19:15:51.907954)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:15:53.484818 run   osmo-stp_10.42.42.5(pid=17944): stderr: 
| �[0;m�[38;5;43m20221212191552077 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212191552077 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212191552077 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212191552078 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212191552078 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212191552078 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212191552078 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:15:53.608252 run   osmo-stp_10.42.42.5(pid=17944): stdout: 
| (launched: 2022-12-12_19:15:51.907954)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:15:53.730486 run   osmo-stp_10.42.42.5(pid=17944): stderr: 
| �[0;m�[38;5;43m20221212191552077 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212191552077 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212191552077 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212191552078 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212191552078 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212191552078 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212191552078 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:15:53.872463 run              patchelf(pid=17947): Terminating (SIGINT)
19:15:54.039143 run              patchelf(pid=17947): Terminated: ok {rc=0}
19:15:54.069425 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=17944): Process ended prematurely: osmo-stp_10.42.42.5(pid=17944) [trial-2381↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17944)]  [trial-2381↪gprs:sysmo↪ping_idle_ping.py:27]
19:15:54.077843 tst             ping_idle_ping.py:27: Test FAILED (6.3 sec)
19:15:54.137427 run   osmo-hlr_10.42.42.2(pid=17941): ERR: Terminated: ERROR {rc=237}  [trial-2381↪gprs:sysmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17941)]
19:15:54.186208 run   osmo-hlr_10.42.42.2(pid=17941): stdout: 
| (launched: 2022-12-12_19:15:50.982785) 
19:15:54.235654 run   osmo-hlr_10.42.42.2(pid=17941): stderr: 
| �[0;m�[1;31m20221212191551156 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221212191551156 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221212191551156 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221212191551156 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221212191551156 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221212191551156 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221212191551168 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:sysmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221212191551177 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212191551177 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212191551177 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
19:15:54.277451 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17940): Terminating (SIGTERM)
19:15:54.317020 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17943): Terminating (SIGTERM)
19:15:54.356476 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17946): Terminating (SIGTERM)
19:15:54.365265 ---      ParallelTerminationStrategy: PID 17940 died...
19:15:54.418402 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17940): Terminated: ok {rc=0}
19:15:54.428028 ---      ParallelTerminationStrategy: PID 17943 died...
19:15:54.481051 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17943): Terminated: ok {rc=0}
19:15:54.490653 ---      ParallelTerminationStrategy: PID 17946 died...
19:15:54.543554 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17946): Terminated: ok {rc=0}
19:15:54.631986 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=17944): Process ended prematurely: osmo-stp_10.42.42.5(pid=17944) [trial-2381↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17944)]