Failed
gprs:oc2g+mod-bts0-dynts-ipa.iperf3.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=18870): Process ended prematurely: osmo-stp_10.42.42.5(pid=18870) [trial-2381↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18870)]
Standard Output
---------------------------------------------- trial-2381 gprs:oc2g+mod-bts0-dynts-ipa iperf3.py ---------------------------------------------- 19:25:04.258263 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:25:04.269687 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 19:25:04.417311 tst iperf3.py: using LAC 30971 19:25:04.536005 tst iperf3.py: using RAC 116 19:25:04.656074 tst iperf3.py: using CellId 30971 19:25:04.774570 tst iperf3.py: using BVCI 30972 19:25:04.797826 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:25:04.808724 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:25:04.819608 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:25:04.830332 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:25:04.840827 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:25:04.851529 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:25:04.862340 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:25:04.872833 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:25:04.883563 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 19:25:05.178752 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 19:25:05.315590 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:25:05.655944 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18862): Launched 19:25:05.938848 run iperf3-srv_10.42.42.10(pid=18863): Launched 19:25:06.138644 tst iperf3.py:8: start network... 19:25:06.274960 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:25:06.788832 run create_hlr_db(pid=18864): Launched 19:25:06.978004 bus /gobi_6: Setting Powered False 19:25:07.999035 run create_hlr_db(pid=18864): Terminated: ok {rc=0} 19:25:08.407462 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18866): Launched 19:25:08.714258 run osmo-hlr_10.42.42.2(pid=18867): Launched 19:25:08.826362 run osmo-stp_10.42.42.5: Starting osmo-stp 19:25:09.355838 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18869): Launched 19:25:09.660231 run osmo-stp_10.42.42.5(pid=18870): Launched 19:25:09.770106 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:25:10.302342 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18872): Launched 19:25:10.410727 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:25:10.678368 run patchelf(pid=18873): Launched 19:25:10.856896 run osmo-stp_10.42.42.5(pid=18870): ERR: Terminated: ERROR {rc=1} [trial-2381↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18870)] 19:25:10.987783 run osmo-stp_10.42.42.5(pid=18870): stdout: | (launched: 2022-12-12_19:25:09.510110) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:25:11.119722 run osmo-stp_10.42.42.5(pid=18870): stderr: | �[0;m�[38;5;43m20221212192509683 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212192509683 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212192509683 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212192509684 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212192509684 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212192509684 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212192509684 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:25:11.245801 run osmo-stp_10.42.42.5(pid=18870): stdout: | (launched: 2022-12-12_19:25:09.510110) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:25:11.370361 run osmo-stp_10.42.42.5(pid=18870): stderr: | �[0;m�[38;5;43m20221212192509683 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212192509683 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212192509683 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212192509684 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212192509684 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212192509684 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212192509684 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:25:11.515377 run patchelf(pid=18873): Terminating (SIGINT) 19:25:11.685981 run patchelf(pid=18873): Terminated: ok {rc=0} 19:25:11.717510 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=18870): Process ended prematurely: osmo-stp_10.42.42.5(pid=18870) [trial-2381↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18870)] [trial-2381↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8] 19:25:11.726684 tst iperf3.py:8: Test FAILED (7.5 sec) 19:25:11.787123 run osmo-hlr_10.42.42.2(pid=18867): ERR: Terminated: ERROR {rc=237} [trial-2381↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18867)] 19:25:11.836847 run osmo-hlr_10.42.42.2(pid=18867): stdout: | (launched: 2022-12-12_19:25:08.562362) 19:25:11.888045 run osmo-hlr_10.42.42.2(pid=18867): stderr: | �[0;m�[1;31m20221212192508740 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212192508740 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212192508740 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212192508740 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212192508740 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212192508740 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212192508752 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:oc2g+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212192508762 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212192508762 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212192508763 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:25:11.930830 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18862): Terminating (SIGTERM) 19:25:11.971135 run iperf3-srv_10.42.42.10(pid=18863): Terminating (SIGTERM) 19:25:12.011625 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18866): Terminating (SIGTERM) 19:25:12.051847 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18869): Terminating (SIGTERM) 19:25:12.092078 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18872): Terminating (SIGTERM) 19:25:12.101437 --- ParallelTerminationStrategy: PID 18862 died... 19:25:12.155797 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18862): Terminated: ok {rc=0} 19:25:12.165883 --- ParallelTerminationStrategy: PID 18863 died... 19:25:12.220071 run iperf3-srv_10.42.42.10(pid=18863): Terminated {rc=256} 19:25:12.229793 --- ParallelTerminationStrategy: PID 18866 died... 19:25:12.283751 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18866): Terminated: ok {rc=0} 19:25:12.293953 --- ParallelTerminationStrategy: PID 18869 died... 19:25:12.347849 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18869): Terminated: ok {rc=0} 19:25:12.357640 --- ParallelTerminationStrategy: PID 18872 died... 19:25:12.411520 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18872): Terminated: ok {rc=0} 19:25:12.502286 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18870): Process ended prematurely: osmo-stp_10.42.42.5(pid=18870) [trial-2381↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18870)]