Failed
gprs:oc2g+mod-bts0-dynts-osmo.ping.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=18967): Process ended prematurely: osmo-stp_10.42.42.5(pid=18967) [trial-2381↪gprs:oc2g+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18967)]
Standard Output
---------------------------------------------- trial-2381 gprs:oc2g+mod-bts0-dynts-osmo ping.py ---------------------------------------------- 19:26:33.740526 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:26:33.752625 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 19:26:33.906468 tst ping.py: using LAC 30978 19:26:34.031098 tst ping.py: using RAC 123 19:26:34.157607 tst ping.py: using CellId 30978 19:26:34.282266 tst ping.py: using BVCI 30979 19:26:34.306821 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:26:34.318417 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:26:34.329678 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:26:34.341178 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:26:34.352626 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:26:34.363974 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:26:34.375686 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:26:34.387175 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 19:26:34.665372 tst ping.py:19: start network... 19:26:34.790770 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:26:35.270617 run create_hlr_db(pid=18961): Launched 19:26:35.444506 bus /gobi_6: Setting Powered False 19:26:36.465180 run create_hlr_db(pid=18961): Terminated: ok {rc=0} 19:26:36.868123 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18963): Launched 19:26:37.167716 run osmo-hlr_10.42.42.2(pid=18964): Launched 19:26:37.280888 run osmo-stp_10.42.42.5: Starting osmo-stp 19:26:37.803633 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18966): Launched 19:26:38.104646 run osmo-stp_10.42.42.5(pid=18967): Launched 19:26:38.218073 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:26:38.741177 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18969): Launched 19:26:38.847233 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:26:39.108391 run patchelf(pid=18970): Launched 19:26:39.283684 run osmo-stp_10.42.42.5(pid=18967): ERR: Terminated: ERROR {rc=1} [trial-2381↪gprs:oc2g+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18967)] 19:26:39.412166 run osmo-stp_10.42.42.5(pid=18967): stdout: | (launched: 2022-12-12_19:26:37.955192) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:26:39.540685 run osmo-stp_10.42.42.5(pid=18967): stderr: | �[0;m�[38;5;43m20221212192638124 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212192638124 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212192638124 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212192638125 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212192638125 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212192638126 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212192638126 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:26:39.664739 run osmo-stp_10.42.42.5(pid=18967): stdout: | (launched: 2022-12-12_19:26:37.955192) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:26:39.788346 run osmo-stp_10.42.42.5(pid=18967): stderr: | �[0;m�[38;5;43m20221212192638124 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212192638124 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212192638124 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212192638125 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212192638125 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212192638126 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212192638126 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:26:39.931066 run patchelf(pid=18970): Terminating (SIGINT) 19:26:40.098214 run patchelf(pid=18970): Terminated: ok {rc=0} 19:26:40.128807 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=18967): Process ended prematurely: osmo-stp_10.42.42.5(pid=18967) [trial-2381↪gprs:oc2g+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18967)] [trial-2381↪gprs:oc2g+mod-bts0-dynts-osmo↪ping.py:22] 19:26:40.137533 tst ping.py:22: Test FAILED (6.4 sec) 19:26:40.197702 run osmo-hlr_10.42.42.2(pid=18964): ERR: Terminated: ERROR {rc=237} [trial-2381↪gprs:oc2g+mod-bts0-dynts-osmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18964)] 19:26:40.247152 run osmo-hlr_10.42.42.2(pid=18964): stdout: | (launched: 2022-12-12_19:26:37.020357) 19:26:40.297268 run osmo-hlr_10.42.42.2(pid=18964): stderr: | �[0;m�[1;31m20221212192637197 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212192637197 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212192637197 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212192637197 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212192637197 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212192637197 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212192637210 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:oc2g+mod-bts0-dynts-osmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212192637219 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212192637219 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212192637219 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:26:40.339927 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18963): Terminating (SIGTERM) 19:26:40.380150 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18966): Terminating (SIGTERM) 19:26:40.420179 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18969): Terminating (SIGTERM) 19:26:40.429901 --- ParallelTerminationStrategy: PID 18963 died... 19:26:40.484390 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18963): Terminated: ok {rc=0} 19:26:40.494242 --- ParallelTerminationStrategy: PID 18966 died... 19:26:40.548145 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18966): Terminated: ok {rc=0} 19:26:40.557878 --- ParallelTerminationStrategy: PID 18969 died... 19:26:40.611583 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18969): Terminated: ok {rc=0} 19:26:40.700123 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18967): Process ended prematurely: osmo-stp_10.42.42.5(pid=18967) [trial-2381↪gprs:oc2g+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18967)]