Failed
gprs:trx-b200+mod-bts0-dynts-ipa.iperf3.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=19468): Process ended prematurely: osmo-stp_10.42.42.5(pid=19468) [trial-2381↪gprs:trx-b200+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19468)]
Standard Output
---------------------------------------------- trial-2381 gprs:trx-b200+mod-bts0-dynts-ipa iperf3.py ---------------------------------------------- 19:33:39.775450 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:33:39.787610 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 19:33:39.958627 tst iperf3.py: using LAC 31017 19:33:40.084371 tst iperf3.py: using RAC 162 19:33:40.213255 tst iperf3.py: using CellId 31017 19:33:40.339812 tst iperf3.py: using BVCI 31018 19:33:40.364631 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:33:40.376039 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:33:40.387236 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:33:40.398919 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:33:40.410386 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:33:40.421840 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:33:40.433418 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:33:40.445323 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:33:40.456799 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 19:33:40.751007 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 19:33:40.886828 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:33:41.222573 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19460): Launched 19:33:41.502634 run iperf3-srv_10.42.42.10(pid=19461): Launched 19:33:41.702226 tst iperf3.py:8: start network... 19:33:41.837841 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:33:42.347801 run create_hlr_db(pid=19462): Launched 19:33:42.535210 bus /gobi_6: Setting Powered False 19:33:43.556748 run create_hlr_db(pid=19462): Terminated: ok {rc=0} 19:33:43.962820 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19464): Launched 19:33:44.264317 run osmo-hlr_10.42.42.2(pid=19465): Launched 19:33:44.375654 run osmo-stp_10.42.42.5: Starting osmo-stp 19:33:44.899197 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19467): Launched 19:33:45.200392 run osmo-stp_10.42.42.5(pid=19468): Launched 19:33:45.309762 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:33:45.839127 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19470): Launched 19:33:45.957610 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:33:46.265669 run patchelf(pid=19471): Launched 19:33:46.450029 run osmo-stp_10.42.42.5(pid=19468): ERR: Terminated: ERROR {rc=1} [trial-2381↪gprs:trx-b200+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19468)] 19:33:46.583436 run osmo-stp_10.42.42.5(pid=19468): stdout: | (launched: 2022-12-12_19:33:45.051799) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:33:46.717660 run osmo-stp_10.42.42.5(pid=19468): stderr: | �[0;m�[38;5;43m20221212193345221 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212193345222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212193345222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212193345222 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212193345223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212193345223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212193345223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:33:46.846004 run osmo-stp_10.42.42.5(pid=19468): stdout: | (launched: 2022-12-12_19:33:45.051799) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:33:46.972753 run osmo-stp_10.42.42.5(pid=19468): stderr: | �[0;m�[38;5;43m20221212193345221 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212193345222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212193345222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212193345222 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212193345223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212193345223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212193345223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:33:47.121579 run patchelf(pid=19471): Terminating (SIGINT) 19:33:47.295681 run patchelf(pid=19471): Terminated: ok {rc=0} 19:33:47.327790 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=19468): Process ended prematurely: osmo-stp_10.42.42.5(pid=19468) [trial-2381↪gprs:trx-b200+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19468)] [trial-2381↪gprs:trx-b200+mod-bts0-dynts-ipa↪iperf3.py:8] 19:33:47.337504 tst iperf3.py:8: Test FAILED (7.6 sec) 19:33:47.398373 run osmo-hlr_10.42.42.2(pid=19465): ERR: Terminated: ERROR {rc=237} [trial-2381↪gprs:trx-b200+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19465)] 19:33:47.448054 run osmo-hlr_10.42.42.2(pid=19465): stdout: | (launched: 2022-12-12_19:33:44.115939) 19:33:47.498506 run osmo-hlr_10.42.42.2(pid=19465): stderr: | �[0;m�[1;31m20221212193344289 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212193344289 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212193344289 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212193344289 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212193344289 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212193344289 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212193344301 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:trx-b200+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212193344310 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212193344310 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212193344310 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:33:47.541077 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19460): Terminating (SIGTERM) 19:33:47.581056 run iperf3-srv_10.42.42.10(pid=19461): Terminating (SIGTERM) 19:33:47.621500 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19464): Terminating (SIGTERM) 19:33:47.661268 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19467): Terminating (SIGTERM) 19:33:47.701237 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19470): Terminating (SIGTERM) 19:33:47.710545 --- ParallelTerminationStrategy: PID 19460 died... 19:33:47.764102 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19460): Terminated: ok {rc=0} 19:33:47.773741 --- ParallelTerminationStrategy: PID 19461 died... 19:33:47.827374 run iperf3-srv_10.42.42.10(pid=19461): Terminated {rc=256} 19:33:47.836822 --- ParallelTerminationStrategy: PID 19464 died... 19:33:47.889887 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19464): Terminated: ok {rc=0} 19:33:47.899491 --- ParallelTerminationStrategy: PID 19467 died... 19:33:47.952798 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19467): Terminated: ok {rc=0} 19:33:47.962411 --- ParallelTerminationStrategy: PID 19470 died... 19:33:48.016019 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19470): Terminated: ok {rc=0} 19:33:48.104429 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19468): Process ended prematurely: osmo-stp_10.42.42.5(pid=19468) [trial-2381↪gprs:trx-b200+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19468)]