Failed
gprs:trx-b200+mod-bts0-egprs.iperf3.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=19400): Process ended prematurely: osmo-stp_10.42.42.5(pid=19400) [trial-2381↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19400)]
Standard Output
---------------------------------------------- trial-2381 gprs:trx-b200+mod-bts0-egprs iperf3.py ---------------------------------------------- 19:32:39.800384 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:32:39.812625 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 19:32:39.961084 tst iperf3.py: using LAC 31012 19:32:40.082737 tst iperf3.py: using RAC 157 19:32:40.203643 tst iperf3.py: using CellId 31012 19:32:40.322265 tst iperf3.py: using BVCI 31013 19:32:40.345561 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:32:40.356446 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:32:40.367285 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:32:40.378586 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:32:40.389762 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:32:40.400792 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:32:40.412070 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:32:40.423569 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:32:40.434352 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 19:32:40.726480 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 19:32:40.863147 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:32:41.199593 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19392): Launched 19:32:41.478320 run iperf3-srv_10.42.42.10(pid=19393): Launched 19:32:41.677715 tst iperf3.py:8: start network... 19:32:41.813822 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:32:42.322758 run create_hlr_db(pid=19394): Launched 19:32:42.510078 bus /gobi_6: Setting Powered False 19:32:43.530476 run create_hlr_db(pid=19394): Terminated: ok {rc=0} 19:32:43.961706 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19396): Launched 19:32:44.283862 run osmo-hlr_10.42.42.2(pid=19397): Launched 19:32:44.403509 run osmo-stp_10.42.42.5: Starting osmo-stp 19:32:44.967351 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19399): Launched 19:32:45.291310 run osmo-stp_10.42.42.5(pid=19400): Launched 19:32:45.409251 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:32:46.003694 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19402): Launched 19:32:46.124354 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:32:46.427736 run patchelf(pid=19403): Launched 19:32:46.623032 run osmo-stp_10.42.42.5(pid=19400): ERR: Terminated: ERROR {rc=1} [trial-2381↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19400)] 19:32:46.766130 run osmo-stp_10.42.42.5(pid=19400): stdout: | (launched: 2022-12-12_19:32:45.131343) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:32:46.910749 run osmo-stp_10.42.42.5(pid=19400): stderr: | �[0;m�[38;5;43m20221212193245322 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212193245322 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212193245322 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212193245323 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212193245323 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212193245323 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212193245323 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:32:47.049221 run osmo-stp_10.42.42.5(pid=19400): stdout: | (launched: 2022-12-12_19:32:45.131343) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:32:47.186515 run osmo-stp_10.42.42.5(pid=19400): stderr: | �[0;m�[38;5;43m20221212193245322 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212193245322 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212193245322 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212193245323 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212193245323 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212193245323 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212193245323 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:32:47.341454 run patchelf(pid=19403): Terminating (SIGINT) 19:32:47.523682 run patchelf(pid=19403): Terminated: ok {rc=0} 19:32:47.556930 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=19400): Process ended prematurely: osmo-stp_10.42.42.5(pid=19400) [trial-2381↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19400)] [trial-2381↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8] 19:32:47.566848 tst iperf3.py:8: Test FAILED (7.8 sec) 19:32:47.630550 run osmo-hlr_10.42.42.2(pid=19397): ERR: Terminated: ERROR {rc=237} [trial-2381↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19397)] 19:32:47.682834 run osmo-hlr_10.42.42.2(pid=19397): stdout: | (launched: 2022-12-12_19:32:44.125678) 19:32:47.735474 run osmo-hlr_10.42.42.2(pid=19397): stderr: | �[0;m�[1;31m20221212193244322 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212193244322 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212193244322 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212193244322 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212193244322 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212193244322 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212193244334 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:trx-b200+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212193244343 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212193244343 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212193244343 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:32:47.779621 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19392): Terminating (SIGTERM) 19:32:47.821906 run iperf3-srv_10.42.42.10(pid=19393): Terminating (SIGTERM) 19:32:47.863961 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19396): Terminating (SIGTERM) 19:32:47.906049 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19399): Terminating (SIGTERM) 19:32:47.948094 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19402): Terminating (SIGTERM) 19:32:47.958204 --- ParallelTerminationStrategy: PID 19392 died... 19:32:48.014860 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19392): Terminated: ok {rc=0} 19:32:48.025303 --- ParallelTerminationStrategy: PID 19393 died... 19:32:48.081567 run iperf3-srv_10.42.42.10(pid=19393): Terminated {rc=256} 19:32:48.091848 --- ParallelTerminationStrategy: PID 19396 died... 19:32:48.147676 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19396): Terminated: ok {rc=0} 19:32:48.158014 --- ParallelTerminationStrategy: PID 19399 died... 19:32:48.214696 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19399): Terminated: ok {rc=0} 19:32:48.225155 --- ParallelTerminationStrategy: PID 19402 died... 19:32:48.281627 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19402): Terminated: ok {rc=0} 19:32:48.369194 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19400): Process ended prematurely: osmo-stp_10.42.42.5(pid=19400) [trial-2381↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19400)]