Failed
gprs:trx-lms+mod-bts0-egprs.ping.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=21806): Process ended prematurely: osmo-stp_10.42.42.5(pid=21806) [trial-2381↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21806)]
Standard Output
---------------------------------------------- trial-2381 gprs:trx-lms+mod-bts0-egprs ping.py ---------------------------------------------- 19:59:11.613668 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:59:11.625871 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 19:59:11.771601 tst ping.py: using LAC 31152 19:59:11.897306 tst ping.py: using RAC 42 19:59:12.021699 tst ping.py: using CellId 31152 19:59:12.145760 tst ping.py: using BVCI 31153 19:59:12.169993 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:59:12.181446 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:59:12.192494 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:59:12.203908 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:59:12.215365 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:59:12.226437 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:59:12.237861 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:59:12.249610 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 19:59:12.521787 tst ping.py:19: start network... 19:59:12.645023 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:59:13.120621 run create_hlr_db(pid=21800): Launched 19:59:13.292244 bus /gobi_6: Setting Powered False 19:59:14.313208 run create_hlr_db(pid=21800): Terminated: ok {rc=0} 19:59:14.738635 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21802): Launched 19:59:15.057507 run osmo-hlr_10.42.42.2(pid=21803): Launched 19:59:15.176574 run osmo-stp_10.42.42.5: Starting osmo-stp 19:59:15.735244 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21805): Launched 19:59:16.121642 run osmo-stp_10.42.42.5(pid=21806): Launched 19:59:16.396497 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:59:17.031480 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21808): Launched 19:59:17.150778 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:59:17.434679 run patchelf(pid=21809): Launched 19:59:17.621455 run osmo-stp_10.42.42.5(pid=21806): ERR: Terminated: ERROR {rc=1} [trial-2381↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21806)] 19:59:17.758511 run osmo-stp_10.42.42.5(pid=21806): stdout: | (launched: 2022-12-12_19:59:15.925207) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:59:17.895329 run osmo-stp_10.42.42.5(pid=21806): stderr: | �[0;m�[38;5;43m20221212195916324 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212195916325 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212195916327 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212195916328 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212195916331 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212195916331 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212195916332 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:59:18.027421 run osmo-stp_10.42.42.5(pid=21806): stdout: | (launched: 2022-12-12_19:59:15.925207) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:59:18.158354 run osmo-stp_10.42.42.5(pid=21806): stderr: | �[0;m�[38;5;43m20221212195916324 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212195916325 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212195916327 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212195916328 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212195916331 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212195916331 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212195916332 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:59:18.310320 run patchelf(pid=21809): Terminating (SIGINT) 19:59:18.487699 run patchelf(pid=21809): Terminated: ok {rc=0} 19:59:18.519989 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=21806): Process ended prematurely: osmo-stp_10.42.42.5(pid=21806) [trial-2381↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21806)] [trial-2381↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22] 19:59:18.529396 tst ping.py:22: Test FAILED (6.9 sec) 19:59:18.594313 run osmo-hlr_10.42.42.2(pid=21803): ERR: Terminated: ERROR {rc=237} [trial-2381↪gprs:trx-lms+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21803)] 19:59:18.646581 run osmo-hlr_10.42.42.2(pid=21803): stdout: | (launched: 2022-12-12_19:59:14.899349) 19:59:18.699232 run osmo-hlr_10.42.42.2(pid=21803): stderr: | �[0;m�[1;31m20221212195915096 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212195915096 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212195915096 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212195915096 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212195915097 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212195915097 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212195915109 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:trx-lms+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212195915119 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212195915119 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212195915119 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:59:18.744302 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21802): Terminating (SIGTERM) 19:59:18.786733 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21805): Terminating (SIGTERM) 19:59:18.829078 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21808): Terminating (SIGTERM) 19:59:18.839227 --- ParallelTerminationStrategy: PID 21802 died... 19:59:18.895763 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21802): Terminated: ok {rc=0} 19:59:18.906394 --- ParallelTerminationStrategy: PID 21805 died... 19:59:18.962569 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21805): Terminated: ok {rc=0} 19:59:18.973263 --- ParallelTerminationStrategy: PID 21808 died... 19:59:19.029612 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21808): Terminated: ok {rc=0} 19:59:19.117813 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21806): Process ended prematurely: osmo-stp_10.42.42.5(pid=21806) [trial-2381↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21806)]