Failed
gprs:trx-lms-limenet-micro.iperf3.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=22261): Process ended prematurely: osmo-stp_10.42.42.5(pid=22261) [trial-2381↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22261)]
Standard Output
---------------------------------------------- trial-2381 gprs:trx-lms-limenet-micro iperf3.py ---------------------------------------------- 20:05:35.566884 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 20:05:35.578483 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 20:05:35.714597 tst iperf3.py: using LAC 31187 20:05:35.834713 tst iperf3.py: using RAC 77 20:05:35.957629 tst iperf3.py: using CellId 31187 20:05:36.074128 tst iperf3.py: using BVCI 31188 20:05:36.097371 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 20:05:36.108375 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 20:05:36.119220 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 20:05:36.130236 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 20:05:36.141098 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 20:05:36.151865 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 20:05:36.162911 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 20:05:36.173780 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 20:05:36.184745 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 20:05:36.480411 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 20:05:36.616413 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:05:36.955080 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22252): Launched 20:05:37.235486 run iperf3-srv_10.42.42.10(pid=22253): Launched 20:05:37.434752 tst iperf3.py:8: start network... 20:05:37.570847 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:05:38.081833 run create_hlr_db(pid=22254): Launched 20:05:38.269052 bus /gobi_6: Setting Powered False 20:05:39.290337 run create_hlr_db(pid=22254): Terminated: ok {rc=0} 20:05:39.695625 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22257): Launched 20:05:39.998758 run osmo-hlr_10.42.42.2(pid=22258): Launched 20:05:40.109379 run osmo-stp_10.42.42.5: Starting osmo-stp 20:05:40.633297 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22260): Launched 20:05:40.934698 run osmo-stp_10.42.42.5(pid=22261): Launched 20:05:41.043293 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:05:41.567152 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22263): Launched 20:05:41.674040 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:05:41.939536 run patchelf(pid=22264): Launched 20:05:42.115889 run osmo-stp_10.42.42.5(pid=22261): ERR: Terminated: ERROR {rc=1} [trial-2381↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22261)] 20:05:42.245119 run osmo-stp_10.42.42.5(pid=22261): stdout: | (launched: 2022-12-12_20:05:40.785321) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:05:42.374961 run osmo-stp_10.42.42.5(pid=22261): stderr: | �[0;m�[38;5;43m20221212200540952 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212200540953 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212200540953 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212200540953 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212200540954 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212200540954 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212200540954 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:05:42.499465 run osmo-stp_10.42.42.5(pid=22261): stdout: | (launched: 2022-12-12_20:05:40.785321) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:05:42.622296 run osmo-stp_10.42.42.5(pid=22261): stderr: | �[0;m�[38;5;43m20221212200540952 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212200540953 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212200540953 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212200540953 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212200540954 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212200540954 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212200540954 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:05:42.765669 run patchelf(pid=22264): Terminating (SIGINT) 20:05:42.935126 run patchelf(pid=22264): Terminated: ok {rc=0} 20:05:42.966180 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=22261): Process ended prematurely: osmo-stp_10.42.42.5(pid=22261) [trial-2381↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22261)] [trial-2381↪gprs:trx-lms-limenet-micro↪iperf3.py:8] 20:05:42.975314 tst iperf3.py:8: Test FAILED (7.4 sec) 20:05:43.035064 run osmo-hlr_10.42.42.2(pid=22258): ERR: Terminated: ERROR {rc=237} [trial-2381↪gprs:trx-lms-limenet-micro↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22258)] 20:05:43.083645 run osmo-hlr_10.42.42.2(pid=22258): stdout: | (launched: 2022-12-12_20:05:39.848193) 20:05:43.133108 run osmo-hlr_10.42.42.2(pid=22258): stderr: | �[0;m�[1;31m20221212200540021 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212200540021 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212200540021 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212200540022 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212200540022 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212200540022 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212200540034 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:trx-lms-limenet-micro/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212200540042 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212200540042 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212200540042 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:05:43.175430 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22252): Terminating (SIGTERM) 20:05:43.214698 run iperf3-srv_10.42.42.10(pid=22253): Terminating (SIGTERM) 20:05:43.253859 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22257): Terminating (SIGTERM) 20:05:43.293059 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22260): Terminating (SIGTERM) 20:05:43.332011 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22263): Terminating (SIGTERM) 20:05:43.341398 --- ParallelTerminationStrategy: PID 22252 died... 20:05:43.394675 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22252): Terminated: ok {rc=0} 20:05:43.404453 --- ParallelTerminationStrategy: PID 22253 died... 20:05:43.457801 run iperf3-srv_10.42.42.10(pid=22253): Terminated {rc=256} 20:05:43.467516 --- ParallelTerminationStrategy: PID 22257 died... 20:05:43.520601 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22257): Terminated: ok {rc=0} 20:05:43.530442 --- ParallelTerminationStrategy: PID 22260 died... 20:05:43.584135 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22260): Terminated: ok {rc=0} 20:05:43.594195 --- ParallelTerminationStrategy: PID 22263 died... 20:05:43.647346 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22263): Terminated: ok {rc=0} 20:05:43.730869 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22261): Process ended prematurely: osmo-stp_10.42.42.5(pid=22261) [trial-2381↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22261)]