Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=21018): Process ended prematurely: osmo-stp_10.42.42.5(pid=21018) [trial-2381↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21018)]
Standard Output
---------------------------------------------- trial-2381 gprs:trx-umtrx+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 19:51:51.114177 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:51:51.126630 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 19:51:51.291195 tst iperf3.py: using LAC 31113 19:51:51.416868 tst iperf3.py: using RAC 3 19:51:51.536375 tst iperf3.py: using CellId 31113 19:51:51.652744 tst iperf3.py: using BVCI 31114 19:51:51.675830 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:51:51.686820 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:51:51.697624 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:51:51.708392 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:51:51.719167 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:51:51.729969 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:51:51.740770 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:51:51.751476 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:51:51.762678 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 19:51:52.053499 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 19:51:52.187164 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:51:52.520307 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21010): Launched 19:51:52.797415 run iperf3-srv_10.42.42.10(pid=21011): Launched 19:51:52.993492 tst iperf3.py:8: start network... 19:51:53.126723 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:51:53.633435 run create_hlr_db(pid=21012): Launched 19:51:53.819320 bus /gobi_6: Setting Powered False 19:51:54.840083 run create_hlr_db(pid=21012): Terminated: ok {rc=0} 19:51:55.243536 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21014): Launched 19:51:55.544432 run osmo-hlr_10.42.42.2(pid=21015): Launched 19:51:55.663576 run osmo-stp_10.42.42.5: Starting osmo-stp 19:51:56.193942 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21017): Launched 19:51:56.494412 run osmo-stp_10.42.42.5(pid=21018): Launched 19:51:56.604147 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:51:57.126500 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21020): Launched 19:51:57.232259 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:51:57.494361 run patchelf(pid=21021): Launched 19:51:57.669592 run osmo-stp_10.42.42.5(pid=21018): ERR: Terminated: ERROR {rc=1} [trial-2381↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21018)] 19:51:57.797551 run osmo-stp_10.42.42.5(pid=21018): stdout: | (launched: 2022-12-12_19:51:56.345788) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:51:57.927088 run osmo-stp_10.42.42.5(pid=21018): stderr: | �[0;m�[38;5;43m20221212195156514 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212195156514 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212195156515 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212195156515 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212195156515 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212195156516 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212195156516 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:51:58.050418 run osmo-stp_10.42.42.5(pid=21018): stdout: | (launched: 2022-12-12_19:51:56.345788) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:51:58.172842 run osmo-stp_10.42.42.5(pid=21018): stderr: | �[0;m�[38;5;43m20221212195156514 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212195156514 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212195156515 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212195156515 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212195156515 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212195156516 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212195156516 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:51:58.315490 run patchelf(pid=21021): Terminating (SIGINT) 19:51:58.483356 run patchelf(pid=21021): Terminated: ok {rc=0} 19:51:58.514207 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=21018): Process ended prematurely: osmo-stp_10.42.42.5(pid=21018) [trial-2381↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21018)] [trial-2381↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8] 19:51:58.523335 tst iperf3.py:8: Test FAILED (7.4 sec) 19:51:58.583554 run osmo-hlr_10.42.42.2(pid=21015): ERR: Terminated: ERROR {rc=237} [trial-2381↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21015)] 19:51:58.632746 run osmo-hlr_10.42.42.2(pid=21015): stdout: | (launched: 2022-12-12_19:51:55.395739) 19:51:58.682522 run osmo-hlr_10.42.42.2(pid=21015): stderr: | �[0;m�[1;31m20221212195155568 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212195155569 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212195155569 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212195155569 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212195155569 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212195155569 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212195155581 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:trx-umtrx+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212195155592 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212195155592 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212195155592 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:51:58.724450 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21010): Terminating (SIGTERM) 19:51:58.764056 run iperf3-srv_10.42.42.10(pid=21011): Terminating (SIGTERM) 19:51:58.803818 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21014): Terminating (SIGTERM) 19:51:58.843573 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21017): Terminating (SIGTERM) 19:51:58.883388 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21020): Terminating (SIGTERM) 19:51:58.892187 --- ParallelTerminationStrategy: PID 21010 died... 19:51:58.945605 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21010): Terminated: ok {rc=0} 19:51:58.955183 --- ParallelTerminationStrategy: PID 21011 died... 19:51:59.008227 run iperf3-srv_10.42.42.10(pid=21011): Terminated {rc=256} 19:51:59.017751 --- ParallelTerminationStrategy: PID 21014 died... 19:51:59.070736 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21014): Terminated: ok {rc=0} 19:51:59.080173 --- ParallelTerminationStrategy: PID 21017 died... 19:51:59.132927 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21017): Terminated: ok {rc=0} 19:51:59.142464 --- ParallelTerminationStrategy: PID 21020 died... 19:51:59.195439 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21020): Terminated: ok {rc=0} 19:51:59.278859 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21018): Process ended prematurely: osmo-stp_10.42.42.5(pid=21018) [trial-2381↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21018)]