Failed
gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend.ping.py (from gprs_trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=29212): Process ended prematurely: osmo-stp_10.42.42.5(pid=29212) [trial-2382↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29212)]
Standard Output
---------------------------------------------- trial-2382 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend ping.py ---------------------------------------------- 21:21:39.291429 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:21:39.303268 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 21:21:39.443893 tst ping.py: using LAC 31581 21:21:39.568732 tst ping.py: using RAC 216 21:21:39.686408 tst ping.py: using CellId 31581 21:21:39.804634 tst ping.py: using BVCI 31582 21:21:39.828067 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:21:39.839443 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:21:39.850569 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:21:39.861738 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:21:39.872840 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:21:39.883939 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:21:39.895130 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:21:39.906259 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 21:21:40.201869 tst ping.py:19: start network... 21:21:40.338960 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:21:40.852032 run create_hlr_db(pid=29206): Launched 21:21:41.042234 bus /gobi_6: Setting Powered False 21:21:42.062622 run create_hlr_db(pid=29206): Terminated: ok {rc=0} 21:21:42.470398 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29208): Launched 21:21:42.774263 run osmo-hlr_10.42.42.2(pid=29209): Launched 21:21:42.886619 run osmo-stp_10.42.42.5: Starting osmo-stp 21:21:43.415541 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29211): Launched 21:21:43.719068 run osmo-stp_10.42.42.5(pid=29212): Launched 21:21:43.830010 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:21:44.362156 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29214): Launched 21:21:44.470324 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:21:44.735523 run patchelf(pid=29215): Launched 21:21:44.913645 run osmo-stp_10.42.42.5(pid=29212): ERR: Terminated: ERROR {rc=1} [trial-2382↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29212)] 21:21:45.044040 run osmo-stp_10.42.42.5(pid=29212): stdout: | (launched: 2022-12-12_21:21:43.570257) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:21:45.174274 run osmo-stp_10.42.42.5(pid=29212): stderr: | �[0;m�[38;5;43m20221212212143737 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212212143737 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212212143737 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212212143737 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212212143738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212212143738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212212143738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:21:45.300405 run osmo-stp_10.42.42.5(pid=29212): stdout: | (launched: 2022-12-12_21:21:43.570257) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:21:45.425164 run osmo-stp_10.42.42.5(pid=29212): stderr: | �[0;m�[38;5;43m20221212212143737 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212212143737 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212212143737 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212212143737 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212212143738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212212143738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212212143738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:21:45.570263 run patchelf(pid=29215): Terminating (SIGINT) 21:21:45.740802 run patchelf(pid=29215): Terminated: ok {rc=0} 21:21:45.771987 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=29212): Process ended prematurely: osmo-stp_10.42.42.5(pid=29212) [trial-2382↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29212)] [trial-2382↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py:22] 21:21:45.780759 tst ping.py:22: Test FAILED (6.5 sec) 21:21:45.849734 run osmo-hlr_10.42.42.2(pid=29209): ERR: Terminated: ERROR {rc=237} [trial-2382↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29209)] 21:21:45.915777 run osmo-hlr_10.42.42.2(pid=29209): stdout: | (launched: 2022-12-12_21:21:42.625497) 21:21:45.968031 run osmo-hlr_10.42.42.2(pid=29209): stderr: | �[0;m�[1;31m20221212212142798 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212212142798 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212212142798 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212212142798 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212212142798 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212212142798 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212212142811 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2382/run.2022-12-12_20-36-34/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212212142821 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212212142821 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212212142821 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:21:46.012652 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29208): Terminating (SIGTERM) 21:21:46.056558 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29211): Terminating (SIGTERM) 21:21:46.100237 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29214): Terminating (SIGTERM) 21:21:46.110737 --- ParallelTerminationStrategy: PID 29208 died... 21:21:46.168186 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29208): Terminated: ok {rc=0} 21:21:46.178453 --- ParallelTerminationStrategy: PID 29211 died... 21:21:46.233958 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29211): Terminated: ok {rc=0} 21:21:46.244239 --- ParallelTerminationStrategy: PID 29214 died... 21:21:46.299780 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29214): Terminated: ok {rc=0} 21:21:46.385834 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29212): Process ended prematurely: osmo-stp_10.42.42.5(pid=29212) [trial-2382↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29212)]