Skip to content

Failed

gprs:sysmo+mod-bts0-dynts-ipa.ping.py (from gprs_sysmo+mod-bts0-dynts-ipa)

Failing for the past 52 builds (Since #2331 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=25602): Process ended prematurely: osmo-stp_10.42.42.5(pid=25602) [trial-2382↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25602)]

Standard Output

----------------------------------------------
trial-2382 gprs:sysmo+mod-bts0-dynts-ipa ping.py
----------------------------------------------
20:45:17.037508 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
20:45:17.050707 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
20:45:17.207019 tst                          ping.py: using LAC 31392
20:45:17.335153 tst                          ping.py: using RAC 27
20:45:17.462458 tst                          ping.py: using CellId 31392
20:45:17.587866 tst                          ping.py: using BVCI 31393
20:45:17.611900 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
20:45:17.623112 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
20:45:17.634187 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
20:45:17.645872 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
20:45:17.657327 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
20:45:17.668754 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
20:45:17.680479 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
20:45:17.692042 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
20:45:17.996466 tst                       ping.py:19: start network...
20:45:18.136883 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
20:45:18.675138 run         create_hlr_db(pid=25596): Launched
20:45:18.869393 bus                          /gobi_6: Setting Powered False
20:45:19.889616 run         create_hlr_db(pid=25596): Terminated: ok {rc=0}
20:45:20.312287 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25598): Launched
20:45:20.628253 run   osmo-hlr_10.42.42.2(pid=25599): Launched
20:45:20.751733 run              osmo-stp_10.42.42.5: Starting osmo-stp
20:45:21.318650 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25601): Launched
20:45:21.636300 run   osmo-stp_10.42.42.5(pid=25602): Launched
20:45:21.751023 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
20:45:22.303341 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25604): Launched
20:45:22.423207 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
20:45:22.717585 run              patchelf(pid=25605): Launched
20:45:22.912398 run   osmo-stp_10.42.42.5(pid=25602): ERR: Terminated: ERROR {rc=1}  [trial-2382↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25602)]
20:45:23.055865 run   osmo-stp_10.42.42.5(pid=25602): stdout: 
| (launched: 2022-12-12_20:45:21.479027)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
20:45:23.198869 run   osmo-stp_10.42.42.5(pid=25602): stderr: 
| �[0;m�[38;5;43m20221212204521654 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212204521654 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212204521655 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212204521655 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212204521656 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212204521656 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212204521656 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
20:45:23.337857 run   osmo-stp_10.42.42.5(pid=25602): stdout: 
| (launched: 2022-12-12_20:45:21.479027)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
20:45:23.474995 run   osmo-stp_10.42.42.5(pid=25602): stderr: 
| �[0;m�[38;5;43m20221212204521654 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212204521654 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212204521655 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212204521655 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212204521656 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212204521656 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212204521656 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
20:45:23.634946 run              patchelf(pid=25605): Terminating (SIGINT)
20:45:23.822478 run              patchelf(pid=25605): Terminated: ok {rc=0}
20:45:23.856663 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=25602): Process ended prematurely: osmo-stp_10.42.42.5(pid=25602) [trial-2382↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25602)]  [trial-2382↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22]
20:45:23.866118 tst                       ping.py:22: Test FAILED (6.8 sec)
20:45:23.930633 run   osmo-hlr_10.42.42.2(pid=25599): ERR: Terminated: ERROR {rc=237}  [trial-2382↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25599)]
20:45:23.983720 run   osmo-hlr_10.42.42.2(pid=25599): stdout: 
| (launched: 2022-12-12_20:45:20.471773) 
20:45:24.037258 run   osmo-hlr_10.42.42.2(pid=25599): stderr: 
| �[0;m�[1;31m20221212204520649 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221212204520649 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221212204520649 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221212204520649 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221212204520649 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221212204520650 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221212204520663 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2382/run.2022-12-12_20-36-34/gprs:sysmo+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221212204520671 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212204520672 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212204520672 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
20:45:24.082883 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25598): Terminating (SIGTERM)
20:45:24.125896 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25601): Terminating (SIGTERM)
20:45:24.168748 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25604): Terminating (SIGTERM)
20:45:24.178796 ---      ParallelTerminationStrategy: PID 25598 died...
20:45:24.236249 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25598): Terminated: ok {rc=0}
20:45:24.246560 ---      ParallelTerminationStrategy: PID 25601 died...
20:45:24.303711 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25601): Terminated: ok {rc=0}
20:45:24.313975 ---      ParallelTerminationStrategy: PID 25604 died...
20:45:24.371086 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25604): Terminated: ok {rc=0}
20:45:24.461223 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=25602): Process ended prematurely: osmo-stp_10.42.42.5(pid=25602) [trial-2382↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25602)]