Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:nanobts+band-1900+mod-bts0-dynts-ipa.iperf3.py (from gprs_nanobts+band-1900+mod-bts0-dynts-ipa)

Failing for the past 245 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=6999): Process ended prematurely: osmo-stp_10.42.42.5(pid=6999) [trial-2383↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6999)]

Standard Output

----------------------------------------------
trial-2383 gprs:nanobts+band-1900+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
23:11:37.849403 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
23:11:37.861445 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
23:11:38.024039 tst                        iperf3.py: using LAC 32157
23:11:38.145994 tst                        iperf3.py: using RAC 27
23:11:38.265329 tst                        iperf3.py: using CellId 32157
23:11:38.385525 tst                        iperf3.py: using BVCI 32158
23:11:38.409209 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
23:11:38.420328 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
23:11:38.431370 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
23:11:38.442577 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
23:11:38.453648 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
23:11:38.464860 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
23:11:38.476118 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
23:11:38.487106 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
23:11:38.498495 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
23:11:38.777896 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
23:11:38.906428 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
23:11:39.224528 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6991): Launched
23:11:39.489175 run iperf3-srv_10.42.42.10(pid=6992): Launched
23:11:39.676155 tst                      iperf3.py:8: start network...
23:11:39.804124 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
23:11:40.285943 run          create_hlr_db(pid=6993): Launched
23:11:40.462517 bus                          /gobi_6: Setting Powered False
23:11:41.482982 run          create_hlr_db(pid=6993): Terminated: ok {rc=0}
23:11:41.889106 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6995): Launched
23:11:42.196032 run    osmo-hlr_10.42.42.2(pid=6996): Launched
23:11:42.315327 run              osmo-stp_10.42.42.5: Starting osmo-stp
23:11:42.853090 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6998): Launched
23:11:43.160837 run    osmo-stp_10.42.42.5(pid=6999): Launched
23:11:43.277838 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
23:11:43.812562 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7001): Launched
23:11:43.921951 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
23:11:44.189101 run               patchelf(pid=7002): Launched
23:11:44.368056 run    osmo-stp_10.42.42.5(pid=6999): ERR: Terminated: ERROR {rc=1}  [trial-2383↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6999)]
23:11:44.498803 run    osmo-stp_10.42.42.5(pid=6999): stdout: 
| (launched: 2022-12-12_23:11:43.009492)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
23:11:44.630059 run    osmo-stp_10.42.42.5(pid=6999): stderr: 
| �[0;m�[38;5;43m20221212231143182 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212231143182 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212231143182 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212231143183 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212231143183 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212231143183 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212231143183 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
23:11:44.756725 run    osmo-stp_10.42.42.5(pid=6999): stdout: 
| (launched: 2022-12-12_23:11:43.009492)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
23:11:44.882944 run    osmo-stp_10.42.42.5(pid=6999): stderr: 
| �[0;m�[38;5;43m20221212231143182 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212231143182 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212231143182 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212231143183 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212231143183 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212231143183 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212231143183 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
23:11:45.030455 run               patchelf(pid=7002): Terminating (SIGINT)
23:11:45.204066 run               patchelf(pid=7002): Terminated: ok {rc=0}
23:11:45.235670 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=6999): Process ended prematurely: osmo-stp_10.42.42.5(pid=6999) [trial-2383↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6999)]  [trial-2383↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8]
23:11:45.244814 tst                      iperf3.py:8: Test FAILED (7.4 sec)
23:11:45.305357 run    osmo-hlr_10.42.42.2(pid=6996): ERR: Terminated: ERROR {rc=237}  [trial-2383↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6996)]
23:11:45.354272 run    osmo-hlr_10.42.42.2(pid=6996): stdout: 
| (launched: 2022-12-12_23:11:42.044480) 
23:11:45.404304 run    osmo-hlr_10.42.42.2(pid=6996): stderr: 
| �[0;m�[1;31m20221212231142220 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221212231142221 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221212231142221 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221212231142221 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221212231142221 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221212231142221 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221212231142232 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2383/run.2022-12-12_22-05-43/gprs:nanobts+band-1900+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221212231142241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212231142241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212231142241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
23:11:45.446233 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6991): Terminating (SIGTERM)
23:11:45.485996 run iperf3-srv_10.42.42.10(pid=6992): Terminating (SIGTERM)
23:11:45.526107 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6995): Terminating (SIGTERM)
23:11:45.565788 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6998): Terminating (SIGTERM)
23:11:45.605442 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7001): Terminating (SIGTERM)
23:11:45.615154 ---      ParallelTerminationStrategy: PID 6991 died...
23:11:45.668309 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6991): Terminated: ok {rc=0}
23:11:45.678498 ---      ParallelTerminationStrategy: PID 6992 died...
23:11:45.731286 run iperf3-srv_10.42.42.10(pid=6992): Terminated {rc=256}
23:11:45.741435 ---      ParallelTerminationStrategy: PID 6995 died...
23:11:45.794067 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6995): Terminated: ok {rc=0}
23:11:45.804246 ---      ParallelTerminationStrategy: PID 6998 died...
23:11:45.876057 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6998): Terminated: ok {rc=0}
23:11:45.887293 ---      ParallelTerminationStrategy: PID 7001 died...
23:11:45.944303 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7001): Terminated: ok {rc=0}
23:11:46.029332 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6999): Process ended prematurely: osmo-stp_10.42.42.5(pid=6999) [trial-2383↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6999)]