Failed
gprs:nanobts+band-1900+mod-bts0-egprs.ping.py (from gprs_nanobts+band-1900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=6960): Process ended prematurely: osmo-stp_10.42.42.5(pid=6960) [trial-2383↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6960)]
Standard Output
---------------------------------------------- trial-2383 gprs:nanobts+band-1900+mod-bts0-egprs ping.py ---------------------------------------------- 23:11:07.181389 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:11:07.193420 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 23:11:07.328018 tst ping.py: using LAC 32154 23:11:07.453288 tst ping.py: using RAC 24 23:11:07.574481 tst ping.py: using CellId 32154 23:11:07.695674 tst ping.py: using BVCI 32155 23:11:07.718822 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:11:07.729911 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:11:07.740699 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:11:07.751900 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:11:07.762858 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:11:07.773484 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:11:07.784648 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:11:07.795655 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 23:11:08.087583 tst ping.py:19: start network... 23:11:08.221352 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:11:08.730821 run create_hlr_db(pid=6954): Launched 23:11:08.916691 bus /gobi_6: Setting Powered False 23:11:09.935982 run create_hlr_db(pid=6954): Terminated: ok {rc=0} 23:11:10.338904 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6956): Launched 23:11:10.640044 run osmo-hlr_10.42.42.2(pid=6957): Launched 23:11:10.756682 run osmo-stp_10.42.42.5: Starting osmo-stp 23:11:11.282981 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6959): Launched 23:11:11.583011 run osmo-stp_10.42.42.5(pid=6960): Launched 23:11:11.692583 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:11:12.216146 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6962): Launched 23:11:12.323287 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:11:12.586089 run patchelf(pid=6963): Launched 23:11:12.763222 run osmo-stp_10.42.42.5(pid=6960): ERR: Terminated: ERROR {rc=1} [trial-2383↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6960)] 23:11:12.891917 run osmo-stp_10.42.42.5(pid=6960): stdout: | (launched: 2022-12-12_23:11:11.434995) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:11:13.021291 run osmo-stp_10.42.42.5(pid=6960): stderr: | �[0;m�[38;5;43m20221212231111604 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212231111605 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212231111605 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212231111605 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212231111607 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212231111608 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212231111608 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:11:13.145895 run osmo-stp_10.42.42.5(pid=6960): stdout: | (launched: 2022-12-12_23:11:11.434995) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:11:13.269677 run osmo-stp_10.42.42.5(pid=6960): stderr: | �[0;m�[38;5;43m20221212231111604 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212231111605 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212231111605 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212231111605 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212231111607 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212231111608 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212231111608 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:11:13.414540 run patchelf(pid=6963): Terminating (SIGINT) 23:11:13.585369 run patchelf(pid=6963): Terminated: ok {rc=0} 23:11:13.616059 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=6960): Process ended prematurely: osmo-stp_10.42.42.5(pid=6960) [trial-2383↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6960)] [trial-2383↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping.py:22] 23:11:13.624595 tst ping.py:22: Test FAILED (6.4 sec) 23:11:13.684664 run osmo-hlr_10.42.42.2(pid=6957): ERR: Terminated: ERROR {rc=237} [trial-2383↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6957)] 23:11:13.734404 run osmo-hlr_10.42.42.2(pid=6957): stdout: | (launched: 2022-12-12_23:11:10.490880) 23:11:13.783759 run osmo-hlr_10.42.42.2(pid=6957): stderr: | �[0;m�[1;31m20221212231110668 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212231110668 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212231110668 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212231110668 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212231110668 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212231110668 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212231110680 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2383/run.2022-12-12_22-05-43/gprs:nanobts+band-1900+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212231110689 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212231110690 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212231110690 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:11:13.826073 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6956): Terminating (SIGTERM) 23:11:13.865955 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6959): Terminating (SIGTERM) 23:11:13.905882 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6962): Terminating (SIGTERM) 23:11:13.915461 --- ParallelTerminationStrategy: PID 6956 died... 23:11:13.969005 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6956): Terminated: ok {rc=0} 23:11:13.978780 --- ParallelTerminationStrategy: PID 6959 died... 23:11:14.032032 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6959): Terminated: ok {rc=0} 23:11:14.041933 --- ParallelTerminationStrategy: PID 6962 died... 23:11:14.094746 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6962): Terminated: ok {rc=0} 23:11:14.177907 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6960): Process ended prematurely: osmo-stp_10.42.42.5(pid=6960) [trial-2383↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6960)]