Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:nanobts+band-900.ping.py (from gprs_nanobts+band-900)

Failing for the past 58 builds (Since #2326 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=7326): Process ended prematurely: osmo-stp_10.42.42.5(pid=7326) [trial-2383↪gprs:nanobts+band-900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7326)]

Standard Output

----------------------------------------------
trial-2383 gprs:nanobts+band-900 ping.py
----------------------------------------------
23:16:20.307184 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
23:16:20.318953 tst            gprs:nanobts+band-900: Using 1 x bts (candidates: 1)
23:16:20.462128 tst                          ping.py: using LAC 32182
23:16:20.588499 tst                          ping.py: using RAC 52
23:16:20.714773 tst                          ping.py: using CellId 32182
23:16:20.841282 tst                          ping.py: using BVCI 32183
23:16:20.866115 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
23:16:20.877315 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
23:16:20.888213 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
23:16:20.899214 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
23:16:20.910137 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
23:16:20.921006 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
23:16:20.932043 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
23:16:20.943077 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
23:16:21.235565 tst                       ping.py:19: start network...
23:16:21.370395 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
23:16:21.882489 run          create_hlr_db(pid=7320): Launched
23:16:22.069057 bus                          /gobi_6: Setting Powered False
23:16:23.087535 run          create_hlr_db(pid=7320): Terminated: ok {rc=0}
23:16:23.515477 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7322): Launched
23:16:23.835363 run    osmo-hlr_10.42.42.2(pid=7323): Launched
23:16:23.951842 run              osmo-stp_10.42.42.5: Starting osmo-stp
23:16:24.513733 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7325): Launched
23:16:24.834529 run    osmo-stp_10.42.42.5(pid=7326): Launched
23:16:24.950562 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
23:16:25.511890 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7328): Launched
23:16:25.626518 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
23:16:25.908338 run               patchelf(pid=7329): Launched
23:16:26.096795 run    osmo-stp_10.42.42.5(pid=7326): ERR: Terminated: ERROR {rc=1}  [trial-2383↪gprs:nanobts+band-900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7326)]
23:16:26.234279 run    osmo-stp_10.42.42.5(pid=7326): stdout: 
| (launched: 2022-12-12_23:16:24.677224)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
23:16:26.372397 run    osmo-stp_10.42.42.5(pid=7326): stderr: 
| �[0;m�[38;5;43m20221212231624869 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212231624869 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212231624869 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212231624870 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212231624872 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212231624872 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212231624872 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
23:16:26.505283 run    osmo-stp_10.42.42.5(pid=7326): stdout: 
| (launched: 2022-12-12_23:16:24.677224)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
23:16:26.636823 run    osmo-stp_10.42.42.5(pid=7326): stderr: 
| �[0;m�[38;5;43m20221212231624869 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212231624869 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212231624869 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212231624870 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212231624872 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212231624872 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212231624872 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
23:16:26.791392 run               patchelf(pid=7329): Terminating (SIGINT)
23:16:26.973734 run               patchelf(pid=7329): Terminated: ok {rc=0}
23:16:27.006519 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=7326): Process ended prematurely: osmo-stp_10.42.42.5(pid=7326) [trial-2383↪gprs:nanobts+band-900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7326)]  [trial-2383↪gprs:nanobts+band-900↪ping.py:22]
23:16:27.015595 tst                       ping.py:22: Test FAILED (6.7 sec)
23:16:27.078102 run    osmo-hlr_10.42.42.2(pid=7323): ERR: Terminated: ERROR {rc=237}  [trial-2383↪gprs:nanobts+band-900↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7323)]
23:16:27.129064 run    osmo-hlr_10.42.42.2(pid=7323): stdout: 
| (launched: 2022-12-12_23:16:23.678676) 
23:16:27.181049 run    osmo-hlr_10.42.42.2(pid=7323): stderr: 
| �[0;m�[1;31m20221212231623877 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221212231623878 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221212231623878 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221212231623878 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221212231623878 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221212231623878 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221212231623890 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2383/run.2022-12-12_22-05-43/gprs:nanobts+band-900/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221212231623900 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212231623900 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212231623900 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
23:16:27.225196 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7322): Terminating (SIGTERM)
23:16:27.266639 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7325): Terminating (SIGTERM)
23:16:27.308164 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7328): Terminating (SIGTERM)
23:16:27.317943 ---      ParallelTerminationStrategy: PID 7322 died...
23:16:27.373768 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7322): Terminated: ok {rc=0}
23:16:27.383955 ---      ParallelTerminationStrategy: PID 7325 died...
23:16:27.439253 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7325): Terminated: ok {rc=0}
23:16:27.449393 ---      ParallelTerminationStrategy: PID 7328 died...
23:16:27.504507 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7328): Terminated: ok {rc=0}
23:16:27.590260 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7326): Process ended prematurely: osmo-stp_10.42.42.5(pid=7326) [trial-2383↪gprs:nanobts+band-900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7326)]