Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=2918): Process ended prematurely: osmo-stp_10.42.42.5(pid=2918) [trial-2383↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2918)]
Standard Output
---------------------------------------------- trial-2383 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 22:32:23.910977 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:32:23.923424 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 22:32:24.069472 tst iperf3.py: using LAC 31949 22:32:24.190092 tst iperf3.py: using RAC 74 22:32:24.311298 tst iperf3.py: using CellId 31949 22:32:24.433857 tst iperf3.py: using BVCI 31950 22:32:24.457700 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:32:24.468765 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:32:24.479774 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:32:24.491150 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:32:24.502435 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:32:24.513650 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:32:24.524850 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:32:24.536115 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:32:24.547491 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 22:32:24.843844 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 22:32:24.980290 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:32:25.318283 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2910): Launched 22:32:25.599188 run iperf3-srv_10.42.42.10(pid=2911): Launched 22:32:25.799653 tst iperf3.py:8: start network... 22:32:25.936182 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:32:26.457754 run create_hlr_db(pid=2912): Launched 22:32:26.646251 bus /gobi_6: Setting Powered False 22:32:27.656211 run create_hlr_db(pid=2912): Terminated: ok {rc=0} 22:32:28.072434 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2914): Launched 22:32:28.380408 run osmo-hlr_10.42.42.2(pid=2915): Launched 22:32:28.499527 run osmo-stp_10.42.42.5: Starting osmo-stp 22:32:29.037662 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2917): Launched 22:32:29.343981 run osmo-stp_10.42.42.5(pid=2918): Launched 22:32:29.456145 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:32:29.988672 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2920): Launched 22:32:30.097622 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:32:30.364060 run patchelf(pid=2921): Launched 22:32:30.543770 run osmo-stp_10.42.42.5(pid=2918): ERR: Terminated: ERROR {rc=1} [trial-2383↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2918)] 22:32:30.674857 run osmo-stp_10.42.42.5(pid=2918): stdout: | (launched: 2022-12-12_22:32:29.193149) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:32:30.806664 run osmo-stp_10.42.42.5(pid=2918): stderr: | �[0;m�[38;5;43m20221212223229365 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212223229365 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212223229365 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212223229366 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212223229366 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212223229366 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212223229366 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:32:30.950346 run osmo-stp_10.42.42.5(pid=2918): stdout: | (launched: 2022-12-12_22:32:29.193149) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:32:31.079555 run osmo-stp_10.42.42.5(pid=2918): stderr: | �[0;m�[38;5;43m20221212223229365 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212223229365 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212223229365 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212223229366 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212223229366 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212223229366 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212223229366 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:32:31.231004 run patchelf(pid=2921): Terminating (SIGINT) 22:32:31.409817 run patchelf(pid=2921): Terminated: ok {rc=0} 22:32:31.442816 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=2918): Process ended prematurely: osmo-stp_10.42.42.5(pid=2918) [trial-2383↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2918)] [trial-2383↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 22:32:31.452906 tst iperf3.py:8: Test FAILED (7.6 sec) 22:32:31.517765 run osmo-hlr_10.42.42.2(pid=2915): ERR: Terminated: ERROR {rc=237} [trial-2383↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2915)] 22:32:31.568992 run osmo-hlr_10.42.42.2(pid=2915): stdout: | (launched: 2022-12-12_22:32:28.228837) 22:32:31.621466 run osmo-hlr_10.42.42.2(pid=2915): stderr: | �[0;m�[1;31m20221212223228408 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212223228408 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212223228408 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212223228408 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212223228408 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212223228408 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212223228420 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2383/run.2022-12-12_22-05-43/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212223228429 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212223228429 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212223228429 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:32:31.664766 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2910): Terminating (SIGTERM) 22:32:31.709683 run iperf3-srv_10.42.42.10(pid=2911): Terminating (SIGTERM) 22:32:31.752494 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2914): Terminating (SIGTERM) 22:32:31.796676 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2917): Terminating (SIGTERM) 22:32:31.839066 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2920): Terminating (SIGTERM) 22:32:31.850289 --- ParallelTerminationStrategy: PID 2910 died... 22:32:31.908117 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2910): Terminated: ok {rc=0} 22:32:31.918694 --- ParallelTerminationStrategy: PID 2911 died... 22:32:31.973280 run iperf3-srv_10.42.42.10(pid=2911): Terminated {rc=256} 22:32:31.984733 --- ParallelTerminationStrategy: PID 2914 died... 22:32:32.039515 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2914): Terminated: ok {rc=0} 22:32:32.051193 --- ParallelTerminationStrategy: PID 2917 died... 22:32:32.106025 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2917): Terminated: ok {rc=0} 22:32:32.117543 --- ParallelTerminationStrategy: PID 2920 died... 22:32:32.172900 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2920): Terminated: ok {rc=0} 22:32:32.260836 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2918): Process ended prematurely: osmo-stp_10.42.42.5(pid=2918) [trial-2383↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2918)]