Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)

Failing for the past 245 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=3663): Process ended prematurely: osmo-stp_10.42.42.5(pid=3663) [trial-2383↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3663)]

Standard Output

----------------------------------------------
trial-2383 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
22:39:18.149544 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
22:39:18.161521 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
22:39:18.330270 tst                        iperf3.py: using LAC 31986
22:39:18.456786 tst                        iperf3.py: using RAC 111
22:39:18.586948 tst                        iperf3.py: using CellId 31986
22:39:18.715512 tst                        iperf3.py: using BVCI 31987
22:39:18.740600 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
22:39:18.752104 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
22:39:18.763451 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
22:39:18.774783 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
22:39:18.786068 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
22:39:18.797311 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
22:39:18.808647 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
22:39:18.819929 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
22:39:18.831354 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
22:39:19.111527 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
22:39:19.238830 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
22:39:19.553966 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3655): Launched
22:39:19.815897 run iperf3-srv_10.42.42.10(pid=3656): Launched
22:39:20.001926 tst                      iperf3.py:8: start network...
22:39:20.128769 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
22:39:20.609418 run          create_hlr_db(pid=3657): Launched
22:39:20.784907 bus                          /gobi_6: Setting Powered False
22:39:21.806178 run          create_hlr_db(pid=3657): Terminated: ok {rc=0}
22:39:22.238458 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3659): Launched
22:39:22.562935 run    osmo-hlr_10.42.42.2(pid=3660): Launched
22:39:22.682100 run              osmo-stp_10.42.42.5: Starting osmo-stp
22:39:23.245740 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3662): Launched
22:39:23.572028 run    osmo-stp_10.42.42.5(pid=3663): Launched
22:39:23.690842 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
22:39:24.259282 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3665): Launched
22:39:24.374799 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
22:39:24.656919 run               patchelf(pid=3666): Launched
22:39:24.846739 run    osmo-stp_10.42.42.5(pid=3663): ERR: Terminated: ERROR {rc=1}  [trial-2383↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3663)]
22:39:24.985462 run    osmo-stp_10.42.42.5(pid=3663): stdout: 
| (launched: 2022-12-12_22:39:23.410769)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
22:39:25.124298 run    osmo-stp_10.42.42.5(pid=3663): stderr: 
| �[0;m�[38;5;43m20221212223923605 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212223923605 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212223923606 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212223923606 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212223923606 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212223923607 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212223923607 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
22:39:25.259209 run    osmo-stp_10.42.42.5(pid=3663): stdout: 
| (launched: 2022-12-12_22:39:23.410769)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
22:39:25.392545 run    osmo-stp_10.42.42.5(pid=3663): stderr: 
| �[0;m�[38;5;43m20221212223923605 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212223923605 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212223923606 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212223923606 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212223923606 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212223923607 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212223923607 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
22:39:25.548479 run               patchelf(pid=3666): Terminating (SIGINT)
22:39:25.732122 run               patchelf(pid=3666): Terminated: ok {rc=0}
22:39:25.765655 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=3663): Process ended prematurely: osmo-stp_10.42.42.5(pid=3663) [trial-2383↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3663)]  [trial-2383↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8]
22:39:25.775474 tst                      iperf3.py:8: Test FAILED (7.7 sec)
22:39:25.837471 run    osmo-hlr_10.42.42.2(pid=3660): ERR: Terminated: ERROR {rc=237}  [trial-2383↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3660)]
22:39:25.888346 run    osmo-hlr_10.42.42.2(pid=3660): stdout: 
| (launched: 2022-12-12_22:39:22.403873) 
22:39:25.940000 run    osmo-hlr_10.42.42.2(pid=3660): stderr: 
| �[0;m�[1;31m20221212223922603 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221212223922603 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221212223922603 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221212223922603 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221212223922603 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221212223922603 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221212223922616 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2383/run.2022-12-12_22-05-43/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221212223922626 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212223922626 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212223922626 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
22:39:25.983706 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3655): Terminating (SIGTERM)
22:39:26.024783 run iperf3-srv_10.42.42.10(pid=3656): Terminating (SIGTERM)
22:39:26.067620 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3659): Terminating (SIGTERM)
22:39:26.108698 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3662): Terminating (SIGTERM)
22:39:26.149925 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3665): Terminating (SIGTERM)
22:39:26.159502 ---      ParallelTerminationStrategy: PID 3655 died...
22:39:26.214803 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3655): Terminated: ok {rc=0}
22:39:26.224676 ---      ParallelTerminationStrategy: PID 3656 died...
22:39:26.279559 run iperf3-srv_10.42.42.10(pid=3656): Terminated {rc=256}
22:39:26.289442 ---      ParallelTerminationStrategy: PID 3659 died...
22:39:26.344534 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3659): Terminated: ok {rc=0}
22:39:26.354501 ---      ParallelTerminationStrategy: PID 3662 died...
22:39:26.409168 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3662): Terminated: ok {rc=0}
22:39:26.419004 ---      ParallelTerminationStrategy: PID 3665 died...
22:39:26.473711 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3665): Terminated: ok {rc=0}
22:39:26.559834 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3663): Process ended prematurely: osmo-stp_10.42.42.5(pid=3663) [trial-2383↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3663)]