Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)

Failing for the past 245 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=3735): Process ended prematurely: osmo-stp_10.42.42.5(pid=3735) [trial-2383↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3735)]

Standard Output

----------------------------------------------
trial-2383 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo iperf3.py
----------------------------------------------
22:40:18.034274 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
22:40:18.046415 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
22:40:18.217003 tst                        iperf3.py: using LAC 31991
22:40:18.350154 tst                        iperf3.py: using RAC 116
22:40:18.476504 tst                        iperf3.py: using CellId 31991
22:40:18.607152 tst                        iperf3.py: using BVCI 31992
22:40:18.632113 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
22:40:18.643638 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
22:40:18.654965 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
22:40:18.666393 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
22:40:18.677698 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
22:40:18.689055 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
22:40:18.700441 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
22:40:18.711610 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
22:40:18.723060 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
22:40:19.015473 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
22:40:19.151092 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
22:40:19.487554 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3727): Launched
22:40:19.767781 run iperf3-srv_10.42.42.10(pid=3728): Launched
22:40:19.966802 tst                      iperf3.py:8: start network...
22:40:20.103102 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
22:40:20.621480 run          create_hlr_db(pid=3729): Launched
22:40:20.808811 bus                          /gobi_6: Setting Powered False
22:40:21.829219 run          create_hlr_db(pid=3729): Terminated: ok {rc=0}
22:40:22.237663 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3731): Launched
22:40:22.543163 run    osmo-hlr_10.42.42.2(pid=3732): Launched
22:40:22.662413 run              osmo-stp_10.42.42.5: Starting osmo-stp
22:40:23.201279 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3734): Launched
22:40:23.506639 run    osmo-stp_10.42.42.5(pid=3735): Launched
22:40:23.619097 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
22:40:24.151114 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3737): Launched
22:40:24.260443 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
22:40:24.527262 run               patchelf(pid=3738): Launched
22:40:24.706242 run    osmo-stp_10.42.42.5(pid=3735): ERR: Terminated: ERROR {rc=1}  [trial-2383↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3735)]
22:40:24.836710 run    osmo-stp_10.42.42.5(pid=3735): stdout: 
| (launched: 2022-12-12_22:40:23.356403)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
22:40:24.967474 run    osmo-stp_10.42.42.5(pid=3735): stderr: 
| �[0;m�[38;5;43m20221212224023525 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212224023525 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212224023526 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212224023526 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212224023526 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212224023526 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212224023527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
22:40:25.094337 run    osmo-stp_10.42.42.5(pid=3735): stdout: 
| (launched: 2022-12-12_22:40:23.356403)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
22:40:25.220155 run    osmo-stp_10.42.42.5(pid=3735): stderr: 
| �[0;m�[38;5;43m20221212224023525 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212224023525 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212224023526 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212224023526 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212224023526 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212224023526 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212224023527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
22:40:25.367831 run               patchelf(pid=3738): Terminating (SIGINT)
22:40:25.541360 run               patchelf(pid=3738): Terminated: ok {rc=0}
22:40:25.572873 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=3735): Process ended prematurely: osmo-stp_10.42.42.5(pid=3735) [trial-2383↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3735)]  [trial-2383↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8]
22:40:25.582162 tst                      iperf3.py:8: Test FAILED (7.6 sec)
22:40:25.642153 run    osmo-hlr_10.42.42.2(pid=3732): ERR: Terminated: ERROR {rc=237}  [trial-2383↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3732)]
22:40:25.691259 run    osmo-hlr_10.42.42.2(pid=3732): stdout: 
| (launched: 2022-12-12_22:40:22.392632) 
22:40:25.740710 run    osmo-hlr_10.42.42.2(pid=3732): stderr: 
| �[0;m�[1;31m20221212224022570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221212224022570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221212224022570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221212224022570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221212224022570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221212224022570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221212224022585 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2383/run.2022-12-12_22-05-43/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221212224022596 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212224022596 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212224022596 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
22:40:25.782708 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3727): Terminating (SIGTERM)
22:40:25.822727 run iperf3-srv_10.42.42.10(pid=3728): Terminating (SIGTERM)
22:40:25.862680 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3731): Terminating (SIGTERM)
22:40:25.902479 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3734): Terminating (SIGTERM)
22:40:25.942211 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3737): Terminating (SIGTERM)
22:40:25.951250 ---      ParallelTerminationStrategy: PID 3727 died...
22:40:26.005228 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3727): Terminated: ok {rc=0}
22:40:26.014964 ---      ParallelTerminationStrategy: PID 3728 died...
22:40:26.067953 run iperf3-srv_10.42.42.10(pid=3728): Terminated {rc=256}
22:40:26.077703 ---      ParallelTerminationStrategy: PID 3731 died...
22:40:26.130432 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3731): Terminated: ok {rc=0}
22:40:26.140152 ---      ParallelTerminationStrategy: PID 3734 died...
22:40:26.193309 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3734): Terminated: ok {rc=0}
22:40:26.203414 ---      ParallelTerminationStrategy: PID 3737 died...
22:40:26.256102 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3737): Terminated: ok {rc=0}
22:40:26.339489 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3735): Process ended prematurely: osmo-stp_10.42.42.5(pid=3735) [trial-2383↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3735)]