Failed
gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-lms-limenet-micro+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=6300): Process ended prematurely: osmo-stp_10.42.42.5(pid=6300) [trial-2383↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6300)]
Standard Output
---------------------------------------------- trial-2383 gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 23:05:23.244689 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:05:23.257139 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 23:05:23.420848 tst iperf3.py: using LAC 32124 23:05:23.549952 tst iperf3.py: using RAC 249 23:05:23.670788 tst iperf3.py: using CellId 32124 23:05:23.798139 tst iperf3.py: using BVCI 32125 23:05:23.823441 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:05:23.835437 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:05:23.847126 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:05:23.858793 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:05:23.870431 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:05:23.881984 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:05:23.893553 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:05:23.904908 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:05:23.916711 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 23:05:24.207262 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 23:05:24.335799 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:05:24.654540 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6292): Launched 23:05:24.920424 run iperf3-srv_10.42.42.10(pid=6293): Launched 23:05:25.109499 tst iperf3.py:8: start network... 23:05:25.238485 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:05:25.727768 run create_hlr_db(pid=6294): Launched 23:05:25.906327 bus /gobi_6: Setting Powered False 23:05:26.925987 run create_hlr_db(pid=6294): Terminated: ok {rc=0} 23:05:27.363748 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6296): Launched 23:05:27.694728 run osmo-hlr_10.42.42.2(pid=6297): Launched 23:05:27.817977 run osmo-stp_10.42.42.5: Starting osmo-stp 23:05:28.397138 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6299): Launched 23:05:28.728740 run osmo-stp_10.42.42.5(pid=6300): Launched 23:05:28.849533 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:05:29.425210 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6302): Launched 23:05:29.542729 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:05:29.830855 run patchelf(pid=6303): Launched 23:05:30.023994 run osmo-stp_10.42.42.5(pid=6300): ERR: Terminated: ERROR {rc=1} [trial-2383↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6300)] 23:05:30.164647 run osmo-stp_10.42.42.5(pid=6300): stdout: | (launched: 2022-12-12_23:05:28.565853) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:05:30.305403 run osmo-stp_10.42.42.5(pid=6300): stderr: | �[0;m�[38;5;43m20221212230528759 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212230528760 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212230528760 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212230528760 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212230528763 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212230528763 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212230528763 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:05:30.442499 run osmo-stp_10.42.42.5(pid=6300): stdout: | (launched: 2022-12-12_23:05:28.565853) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:05:30.577938 run osmo-stp_10.42.42.5(pid=6300): stderr: | �[0;m�[38;5;43m20221212230528759 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212230528760 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212230528760 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212230528760 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212230528763 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212230528763 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212230528763 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:05:30.735994 run patchelf(pid=6303): Terminating (SIGINT) 23:05:30.936537 run patchelf(pid=6303): Terminated: ok {rc=0} 23:05:30.971492 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=6300): Process ended prematurely: osmo-stp_10.42.42.5(pid=6300) [trial-2383↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6300)] [trial-2383↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3.py:8] 23:05:30.981939 tst iperf3.py:8: Test FAILED (7.8 sec) 23:05:31.047365 run osmo-hlr_10.42.42.2(pid=6297): ERR: Terminated: ERROR {rc=237} [trial-2383↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6297)] 23:05:31.099455 run osmo-hlr_10.42.42.2(pid=6297): stdout: | (launched: 2022-12-12_23:05:27.532241) 23:05:31.153342 run osmo-hlr_10.42.42.2(pid=6297): stderr: | �[0;m�[1;31m20221212230527731 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212230527731 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212230527731 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212230527731 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212230527731 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212230527732 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212230527744 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2383/run.2022-12-12_22-05-43/gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212230527754 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212230527754 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212230527754 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:05:31.197172 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6292): Terminating (SIGTERM) 23:05:31.240718 run iperf3-srv_10.42.42.10(pid=6293): Terminating (SIGTERM) 23:05:31.283927 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6296): Terminating (SIGTERM) 23:05:31.330071 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6299): Terminating (SIGTERM) 23:05:31.376346 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6302): Terminating (SIGTERM) 23:05:31.386955 --- ParallelTerminationStrategy: PID 6292 died... 23:05:31.445551 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6292): Terminated: ok {rc=0} 23:05:31.456102 --- ParallelTerminationStrategy: PID 6293 died... 23:05:31.512320 run iperf3-srv_10.42.42.10(pid=6293): Terminated {rc=256} 23:05:31.523151 --- ParallelTerminationStrategy: PID 6296 died... 23:05:31.581264 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6296): Terminated: ok {rc=0} 23:05:31.592380 --- ParallelTerminationStrategy: PID 6299 died... 23:05:31.647797 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6299): Terminated: ok {rc=0} 23:05:31.659526 --- ParallelTerminationStrategy: PID 6302 died... 23:05:31.717606 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6302): Terminated: ok {rc=0} 23:05:31.821109 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6300): Process ended prematurely: osmo-stp_10.42.42.5(pid=6300) [trial-2383↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6300)]