Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=3324): Process ended prematurely: osmo-stp_10.42.42.5(pid=3324) [trial-2383↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3324)]
Standard Output
---------------------------------------------- trial-2383 gprs:trx-sysmocell5000+mod-bts0-egprs iperf3.py ---------------------------------------------- 22:38:16.203170 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:38:16.215658 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 22:38:16.364358 tst iperf3.py: using LAC 31981 22:38:16.493066 tst iperf3.py: using RAC 106 22:38:16.617967 tst iperf3.py: using CellId 31981 22:38:16.769583 tst iperf3.py: using BVCI 31982 22:38:16.803660 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:38:16.818639 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:38:16.834558 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:38:16.850584 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:38:16.866608 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:38:16.881841 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:38:16.894195 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:38:16.906871 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:38:16.919724 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 22:38:17.232171 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 22:38:17.362024 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:38:17.687907 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3316): Launched 22:38:17.966567 run iperf3-srv_10.42.42.10(pid=3317): Launched 22:38:18.165802 tst iperf3.py:8: start network... 22:38:18.302088 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:38:18.820531 run create_hlr_db(pid=3318): Launched 22:38:19.007656 bus /gobi_6: Setting Powered False 22:38:20.027827 run create_hlr_db(pid=3318): Terminated: ok {rc=0} 22:38:20.435373 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3320): Launched 22:38:20.741394 run osmo-hlr_10.42.42.2(pid=3321): Launched 22:38:20.858040 run osmo-stp_10.42.42.5: Starting osmo-stp 22:38:21.386902 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3323): Launched 22:38:21.689928 run osmo-stp_10.42.42.5(pid=3324): Launched 22:38:21.800594 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:38:22.330375 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3326): Launched 22:38:22.438781 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:38:22.703889 run patchelf(pid=3327): Launched 22:38:22.883059 run osmo-stp_10.42.42.5(pid=3324): ERR: Terminated: ERROR {rc=1} [trial-2383↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3324)] 22:38:23.013304 run osmo-stp_10.42.42.5(pid=3324): stdout: | (launched: 2022-12-12_22:38:21.541432) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:38:23.144586 run osmo-stp_10.42.42.5(pid=3324): stderr: | �[0;m�[38;5;43m20221212223821711 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212223821711 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212223821711 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212223821712 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212223821714 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212223821714 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212223821714 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:38:23.271162 run osmo-stp_10.42.42.5(pid=3324): stdout: | (launched: 2022-12-12_22:38:21.541432) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:38:23.396161 run osmo-stp_10.42.42.5(pid=3324): stderr: | �[0;m�[38;5;43m20221212223821711 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212223821711 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212223821711 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212223821712 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212223821714 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212223821714 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212223821714 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:38:23.543133 run patchelf(pid=3327): Terminating (SIGINT) 22:38:23.716290 run patchelf(pid=3327): Terminated: ok {rc=0} 22:38:23.747799 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=3324): Process ended prematurely: osmo-stp_10.42.42.5(pid=3324) [trial-2383↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3324)] [trial-2383↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8] 22:38:23.756775 tst iperf3.py:8: Test FAILED (7.6 sec) 22:38:23.816897 run osmo-hlr_10.42.42.2(pid=3321): ERR: Terminated: ERROR {rc=237} [trial-2383↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3321)] 22:38:23.865430 run osmo-hlr_10.42.42.2(pid=3321): stdout: | (launched: 2022-12-12_22:38:20.590105) 22:38:23.914516 run osmo-hlr_10.42.42.2(pid=3321): stderr: | �[0;m�[1;31m20221212223820765 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212223820765 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212223820765 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212223820766 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212223820766 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212223820766 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212223820778 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2383/run.2022-12-12_22-05-43/gprs:trx-sysmocell5000+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212223820787 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212223820787 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212223820787 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:38:23.955997 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3316): Terminating (SIGTERM) 22:38:23.995449 run iperf3-srv_10.42.42.10(pid=3317): Terminating (SIGTERM) 22:38:24.034889 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3320): Terminating (SIGTERM) 22:38:24.074235 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3323): Terminating (SIGTERM) 22:38:24.113970 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3326): Terminating (SIGTERM) 22:38:24.123314 --- ParallelTerminationStrategy: PID 3316 died... 22:38:24.176435 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3316): Terminated: ok {rc=0} 22:38:24.186408 --- ParallelTerminationStrategy: PID 3317 died... 22:38:24.238990 run iperf3-srv_10.42.42.10(pid=3317): Terminated {rc=256} 22:38:24.248751 --- ParallelTerminationStrategy: PID 3320 died... 22:38:24.301642 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3320): Terminated: ok {rc=0} 22:38:24.311071 --- ParallelTerminationStrategy: PID 3323 died... 22:38:24.363784 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3323): Terminated: ok {rc=0} 22:38:24.373451 --- ParallelTerminationStrategy: PID 3326 died... 22:38:24.426032 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3326): Terminated: ok {rc=0} 22:38:24.514590 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3324): Process ended prematurely: osmo-stp_10.42.42.5(pid=3324) [trial-2383↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3324)]