Failed
gprs:nanobts+band-1900.ping.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=16142): Process ended prematurely: osmo-stp_10.42.42.5(pid=16142) [trial-2384↪gprs:nanobts+band-1900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16142)]
Standard Output
---------------------------------------------- trial-2384 gprs:nanobts+band-1900 ping.py ---------------------------------------------- 01:14:28.440228 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:14:28.451653 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 01:14:28.577458 tst ping.py: using LAC 32610 01:14:28.695746 tst ping.py: using RAC 225 01:14:28.815374 tst ping.py: using CellId 32610 01:14:28.933174 tst ping.py: using BVCI 32611 01:14:28.956508 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:14:28.967324 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:14:28.978077 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:14:28.988761 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:14:28.999326 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:14:29.010029 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:14:29.020750 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:14:29.031465 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 01:14:29.326403 tst ping.py:19: start network... 01:14:29.462602 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:14:29.978429 run create_hlr_db(pid=16136): Launched 01:14:30.167566 bus /gobi_6: Setting Powered False 01:14:31.189999 run create_hlr_db(pid=16136): Terminated: ok {rc=0} 01:14:31.643428 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16138): Launched 01:14:32.082471 run osmo-hlr_10.42.42.2(pid=16139): Launched 01:14:32.251360 run osmo-stp_10.42.42.5: Starting osmo-stp 01:14:32.785401 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16141): Launched 01:14:33.090889 run osmo-stp_10.42.42.5(pid=16142): Launched 01:14:33.201778 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:14:33.739741 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16144): Launched 01:14:33.848112 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:14:34.118599 run patchelf(pid=16145): Launched 01:14:34.297949 run osmo-stp_10.42.42.5(pid=16142): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:nanobts+band-1900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16142)] 01:14:34.429070 run osmo-stp_10.42.42.5(pid=16142): stdout: | (launched: 2022-12-13_01:14:32.939858) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:14:34.560231 run osmo-stp_10.42.42.5(pid=16142): stderr: | �[0;m�[38;5;43m20221213011433108 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213011433108 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213011433108 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213011433109 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213011433109 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213011433109 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213011433109 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:14:34.686211 run osmo-stp_10.42.42.5(pid=16142): stdout: | (launched: 2022-12-13_01:14:32.939858) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:14:34.811302 run osmo-stp_10.42.42.5(pid=16142): stderr: | �[0;m�[38;5;43m20221213011433108 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213011433108 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213011433108 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213011433109 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213011433109 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213011433109 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213011433109 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:14:34.957282 run patchelf(pid=16145): Terminating (SIGINT) 01:14:35.129764 run patchelf(pid=16145): Terminated: ok {rc=0} 01:14:35.160815 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=16142): Process ended prematurely: osmo-stp_10.42.42.5(pid=16142) [trial-2384↪gprs:nanobts+band-1900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16142)] [trial-2384↪gprs:nanobts+band-1900↪ping.py:22] 01:14:35.169401 tst ping.py:22: Test FAILED (6.7 sec) 01:14:35.229856 run osmo-hlr_10.42.42.2(pid=16139): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:nanobts+band-1900↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16139)] 01:14:35.279351 run osmo-hlr_10.42.42.2(pid=16139): stdout: | (launched: 2022-12-13_01:14:31.812645) 01:14:35.329620 run osmo-hlr_10.42.42.2(pid=16139): stderr: | �[0;m�[1;31m20221213011432044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213011432044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213011432044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213011432044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213011432044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213011432044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213011432062 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:nanobts+band-1900/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213011432081 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213011432081 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213011432081 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:14:35.372149 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16138): Terminating (SIGTERM) 01:14:35.412299 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16141): Terminating (SIGTERM) 01:14:35.452752 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16144): Terminating (SIGTERM) 01:14:35.462257 --- ParallelTerminationStrategy: PID 16138 died... 01:14:35.515834 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16138): Terminated: ok {rc=0} 01:14:35.525662 --- ParallelTerminationStrategy: PID 16141 died... 01:14:35.579130 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16141): Terminated: ok {rc=0} 01:14:35.588793 --- ParallelTerminationStrategy: PID 16144 died... 01:14:35.641889 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16144): Terminated: ok {rc=0} 01:14:35.730297 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16142): Process ended prematurely: osmo-stp_10.42.42.5(pid=16142) [trial-2384↪gprs:nanobts+band-1900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16142)]