Failed
gprs:sysmo+mod-bts0-dynts-osmo.ping.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=10702): Process ended prematurely: osmo-stp_10.42.42.5(pid=10702) [trial-2384↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10702)]
Standard Output
---------------------------------------------- trial-2384 gprs:sysmo+mod-bts0-dynts-osmo ping.py ---------------------------------------------- 00:19:29.082474 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:19:29.094387 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 00:19:29.247690 tst ping.py: using LAC 32319 00:19:29.373695 tst ping.py: using RAC 189 00:19:29.501383 tst ping.py: using CellId 32319 00:19:29.626950 tst ping.py: using BVCI 32320 00:19:29.651574 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:19:29.663525 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:19:29.674845 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:19:29.686766 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:19:29.698245 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:19:29.709706 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:19:29.721969 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:19:29.733131 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 00:19:30.022522 tst ping.py:19: start network... 00:19:30.156096 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:19:30.659249 run create_hlr_db(pid=10696): Launched 00:19:30.852833 bus /gobi_6: Setting Powered False 00:19:31.890783 run create_hlr_db(pid=10696): Terminated: ok {rc=0} 00:19:32.305077 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10698): Launched 00:19:32.602853 run osmo-hlr_10.42.42.2(pid=10699): Launched 00:19:32.714050 run osmo-stp_10.42.42.5: Starting osmo-stp 00:19:33.235830 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10701): Launched 00:19:33.534127 run osmo-stp_10.42.42.5(pid=10702): Launched 00:19:33.641817 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:19:34.161470 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10704): Launched 00:19:34.266625 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:19:34.538506 run patchelf(pid=10705): Launched 00:19:34.727655 run osmo-stp_10.42.42.5(pid=10702): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10702)] 00:19:34.865830 run osmo-stp_10.42.42.5(pid=10702): stdout: | (launched: 2022-12-13_00:19:33.387234) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:19:35.003981 run osmo-stp_10.42.42.5(pid=10702): stderr: | �[0;m�[38;5;43m20221213001933556 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213001933556 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213001933557 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213001933557 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213001933558 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213001933558 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213001933558 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:19:35.137355 run osmo-stp_10.42.42.5(pid=10702): stdout: | (launched: 2022-12-13_00:19:33.387234) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:19:35.270024 run osmo-stp_10.42.42.5(pid=10702): stderr: | �[0;m�[38;5;43m20221213001933556 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213001933556 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213001933557 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213001933557 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213001933558 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213001933558 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213001933558 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:19:35.423796 run patchelf(pid=10705): Terminating (SIGINT) 00:19:35.604630 run patchelf(pid=10705): Terminated: ok {rc=0} 00:19:35.637510 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=10702): Process ended prematurely: osmo-stp_10.42.42.5(pid=10702) [trial-2384↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10702)] [trial-2384↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22] 00:19:35.646793 tst ping.py:22: Test FAILED (6.6 sec) 00:19:35.711210 run osmo-hlr_10.42.42.2(pid=10699): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10699)] 00:19:35.763558 run osmo-hlr_10.42.42.2(pid=10699): stdout: | (launched: 2022-12-13_00:19:32.455221) 00:19:35.816471 run osmo-hlr_10.42.42.2(pid=10699): stderr: | �[0;m�[1;31m20221213001932630 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213001932630 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213001932630 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213001932630 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213001932630 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213001932630 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213001932643 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:sysmo+mod-bts0-dynts-osmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213001932654 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213001932654 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213001932654 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:19:35.861672 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10698): Terminating (SIGTERM) 00:19:35.904146 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10701): Terminating (SIGTERM) 00:19:35.946767 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10704): Terminating (SIGTERM) 00:19:35.957384 --- ParallelTerminationStrategy: PID 10698 died... 00:19:36.013990 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10698): Terminated: ok {rc=0} 00:19:36.024658 --- ParallelTerminationStrategy: PID 10701 died... 00:19:36.081390 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10701): Terminated: ok {rc=0} 00:19:36.091605 --- ParallelTerminationStrategy: PID 10704 died... 00:19:36.147731 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10704): Terminated: ok {rc=0} 00:19:36.234348 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10702): Process ended prematurely: osmo-stp_10.42.42.5(pid=10702) [trial-2384↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10702)]