Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-lms.ping_idle_ping.py (from gprs_trx-lms)

Failing for the past 65 builds (Since #2320 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=14840): Process ended prematurely: osmo-stp_10.42.42.5(pid=14840) [trial-2384↪gprs:trx-lms↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14840)]

Standard Output

----------------------------------------------
trial-2384 gprs:trx-lms ping_idle_ping.py
----------------------------------------------
00:59:26.375199 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
00:59:26.387164 tst                     gprs:trx-lms: Using 1 x bts (candidates: 1)
00:59:26.533497 tst                ping_idle_ping.py: using LAC 32531
00:59:26.660746 tst                ping_idle_ping.py: using RAC 146
00:59:26.781314 tst                ping_idle_ping.py: using CellId 32531
00:59:26.903318 tst                ping_idle_ping.py: using BVCI 32532
00:59:26.926370 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
00:59:26.937057 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
00:59:26.947719 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
00:59:26.958242 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
00:59:26.968710 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
00:59:26.979145 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
00:59:26.989753 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
00:59:27.000111 tst                     gprs:trx-lms: Using 1 x modem (candidates: 4)
00:59:27.292509 tst             ping_idle_ping.py:24: start network...
00:59:27.426750 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
00:59:27.934875 run         create_hlr_db(pid=14834): Launched
00:59:28.121990 bus                          /gobi_6: Setting Powered False
00:59:29.141879 run         create_hlr_db(pid=14834): Terminated: ok {rc=0}
00:59:29.548170 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14836): Launched
00:59:29.850552 run   osmo-hlr_10.42.42.2(pid=14837): Launched
00:59:29.961989 run              osmo-stp_10.42.42.5: Starting osmo-stp
00:59:30.485365 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14839): Launched
00:59:30.785058 run   osmo-stp_10.42.42.5(pid=14840): Launched
00:59:30.955841 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
00:59:31.495565 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14842): Launched
00:59:31.604104 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
00:59:31.889779 run              patchelf(pid=14843): Launched
00:59:32.068295 run   osmo-stp_10.42.42.5(pid=14840): ERR: Terminated: ERROR {rc=1}  [trial-2384↪gprs:trx-lms↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14840)]
00:59:32.199024 run   osmo-stp_10.42.42.5(pid=14840): stdout: 
| (launched: 2022-12-13_00:59:30.636397)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:59:32.329652 run   osmo-stp_10.42.42.5(pid=14840): stderr: 
| �[0;m�[38;5;43m20221213005930805 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213005930805 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213005930806 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213005930806 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213005930806 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213005930807 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213005930807 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:59:32.453343 run   osmo-stp_10.42.42.5(pid=14840): stdout: 
| (launched: 2022-12-13_00:59:30.636397)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:59:32.575876 run   osmo-stp_10.42.42.5(pid=14840): stderr: 
| �[0;m�[38;5;43m20221213005930805 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213005930805 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213005930806 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213005930806 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213005930806 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213005930807 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213005930807 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:59:32.719311 run              patchelf(pid=14843): Terminating (SIGINT)
00:59:32.888276 run              patchelf(pid=14843): Terminated: ok {rc=0}
00:59:32.919297 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=14840): Process ended prematurely: osmo-stp_10.42.42.5(pid=14840) [trial-2384↪gprs:trx-lms↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14840)]  [trial-2384↪gprs:trx-lms↪ping_idle_ping.py:27]
00:59:32.928052 tst             ping_idle_ping.py:27: Test FAILED (6.5 sec)
00:59:32.988407 run   osmo-hlr_10.42.42.2(pid=14837): ERR: Terminated: ERROR {rc=237}  [trial-2384↪gprs:trx-lms↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14837)]
00:59:33.037761 run   osmo-hlr_10.42.42.2(pid=14837): stdout: 
| (launched: 2022-12-13_00:59:29.700893) 
00:59:33.087764 run   osmo-hlr_10.42.42.2(pid=14837): stderr: 
| �[0;m�[1;31m20221213005929875 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213005929875 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213005929875 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213005929875 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213005929875 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213005929875 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213005929887 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:trx-lms/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213005929898 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213005929898 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213005929898 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
00:59:33.130215 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14836): Terminating (SIGTERM)
00:59:33.170287 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14839): Terminating (SIGTERM)
00:59:33.210406 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14842): Terminating (SIGTERM)
00:59:33.219908 ---      ParallelTerminationStrategy: PID 14836 died...
00:59:33.273351 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14836): Terminated: ok {rc=0}
00:59:33.283328 ---      ParallelTerminationStrategy: PID 14839 died...
00:59:33.336684 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14839): Terminated: ok {rc=0}
00:59:33.346501 ---      ParallelTerminationStrategy: PID 14842 died...
00:59:33.399843 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14842): Terminated: ok {rc=0}
00:59:33.488679 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14840): Process ended prematurely: osmo-stp_10.42.42.5(pid=14840) [trial-2384↪gprs:trx-lms↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14840)]