Failed
gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo.ping.py (from gprs_trx-lms-limenet-micro+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=15857): Process ended prematurely: osmo-stp_10.42.42.5(pid=15857) [trial-2384↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15857)]
Standard Output
---------------------------------------------- trial-2384 gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo ping.py ---------------------------------------------- 01:10:16.229561 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:10:16.242449 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 01:10:16.435079 tst ping.py: using LAC 32587 01:10:16.565403 tst ping.py: using RAC 202 01:10:16.687779 tst ping.py: using CellId 32587 01:10:16.815593 tst ping.py: using BVCI 32588 01:10:16.841982 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:10:16.854748 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:10:16.868134 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:10:16.881577 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:10:16.894146 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:10:16.907508 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:10:16.920896 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:10:16.934543 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 01:10:17.286347 tst ping.py:19: start network... 01:10:17.414716 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:10:17.901401 run create_hlr_db(pid=15851): Launched 01:10:18.076512 bus /gobi_6: Setting Powered False 01:10:19.097942 run create_hlr_db(pid=15851): Terminated: ok {rc=0} 01:10:19.532672 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15853): Launched 01:10:19.860312 run osmo-hlr_10.42.42.2(pid=15854): Launched 01:10:19.979760 run osmo-stp_10.42.42.5: Starting osmo-stp 01:10:20.550688 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15856): Launched 01:10:20.876667 run osmo-stp_10.42.42.5(pid=15857): Launched 01:10:20.994699 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:10:21.567606 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15859): Launched 01:10:21.683914 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:10:21.971328 run patchelf(pid=15860): Launched 01:10:22.161608 run osmo-stp_10.42.42.5(pid=15857): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15857)] 01:10:22.301110 run osmo-stp_10.42.42.5(pid=15857): stdout: | (launched: 2022-12-13_01:10:20.716027) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:10:22.440676 run osmo-stp_10.42.42.5(pid=15857): stderr: | �[0;m�[38;5;43m20221213011020907 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213011020907 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213011020908 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213011020908 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213011020908 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213011020909 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213011020909 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:10:22.575357 run osmo-stp_10.42.42.5(pid=15857): stdout: | (launched: 2022-12-13_01:10:20.716027) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:10:22.708792 run osmo-stp_10.42.42.5(pid=15857): stderr: | �[0;m�[38;5;43m20221213011020907 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213011020907 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213011020908 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213011020908 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213011020908 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213011020909 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213011020909 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:10:22.864264 run patchelf(pid=15860): Terminating (SIGINT) 01:10:23.047646 run patchelf(pid=15860): Terminated: ok {rc=0} 01:10:23.080796 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=15857): Process ended prematurely: osmo-stp_10.42.42.5(pid=15857) [trial-2384↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15857)] [trial-2384↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪ping.py:22] 01:10:23.090324 tst ping.py:22: Test FAILED (6.8 sec) 01:10:23.155085 run osmo-hlr_10.42.42.2(pid=15854): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15854)] 01:10:23.208153 run osmo-hlr_10.42.42.2(pid=15854): stdout: | (launched: 2022-12-13_01:10:19.697905) 01:10:23.261725 run osmo-hlr_10.42.42.2(pid=15854): stderr: | �[0;m�[1;31m20221213011019895 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213011019895 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213011019895 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213011019895 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213011019895 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213011019895 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213011019907 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213011019916 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213011019916 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213011019916 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:10:23.307399 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15853): Terminating (SIGTERM) 01:10:23.350183 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15856): Terminating (SIGTERM) 01:10:23.393697 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15859): Terminating (SIGTERM) 01:10:23.403749 --- ParallelTerminationStrategy: PID 15853 died... 01:10:23.461698 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15853): Terminated: ok {rc=0} 01:10:23.472112 --- ParallelTerminationStrategy: PID 15856 died... 01:10:23.528928 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15856): Terminated: ok {rc=0} 01:10:23.539517 --- ParallelTerminationStrategy: PID 15859 died... 01:10:23.596529 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15859): Terminated: ok {rc=0} 01:10:23.685535 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15857): Process ended prematurely: osmo-stp_10.42.42.5(pid=15857) [trial-2384↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15857)]