Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.ping.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=12968): Process ended prematurely: osmo-stp_10.42.42.5(pid=12968) [trial-2384↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12968)]
Standard Output
---------------------------------------------- trial-2384 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa ping.py ---------------------------------------------- 00:43:59.666915 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:43:59.679805 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 00:43:59.838405 tst ping.py: using LAC 32449 00:43:59.956535 tst ping.py: using RAC 64 00:44:00.083822 tst ping.py: using CellId 32449 00:44:00.211328 tst ping.py: using BVCI 32450 00:44:00.236741 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:44:00.248497 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:44:00.260157 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:44:00.272304 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:44:00.284061 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:44:00.296165 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:44:00.308110 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:44:00.319922 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 00:44:00.616187 tst ping.py:19: start network... 00:44:00.750678 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:44:01.314859 run create_hlr_db(pid=12962): Launched 00:44:01.494504 bus /gobi_6: Setting Powered False 00:44:02.510429 run create_hlr_db(pid=12962): Terminated: ok {rc=0} 00:44:02.940223 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12964): Launched 00:44:03.263032 run osmo-hlr_10.42.42.2(pid=12965): Launched 00:44:03.379851 run osmo-stp_10.42.42.5: Starting osmo-stp 00:44:03.943551 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12967): Launched 00:44:04.265699 run osmo-stp_10.42.42.5(pid=12968): Launched 00:44:04.385389 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:44:04.950676 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12970): Launched 00:44:05.066679 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:44:05.349571 run patchelf(pid=12971): Launched 00:44:05.539818 run osmo-stp_10.42.42.5(pid=12968): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12968)] 00:44:05.679244 run osmo-stp_10.42.42.5(pid=12968): stdout: | (launched: 2022-12-13_00:44:04.107297) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:44:05.818900 run osmo-stp_10.42.42.5(pid=12968): stderr: | �[0;m�[38;5;43m20221213004404296 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213004404296 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213004404297 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213004404297 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213004404298 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213004404298 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213004404298 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:44:05.953514 run osmo-stp_10.42.42.5(pid=12968): stdout: | (launched: 2022-12-13_00:44:04.107297) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:44:06.086646 run osmo-stp_10.42.42.5(pid=12968): stderr: | �[0;m�[38;5;43m20221213004404296 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213004404296 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213004404297 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213004404297 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213004404298 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213004404298 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213004404298 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:44:06.241871 run patchelf(pid=12971): Terminating (SIGINT) 00:44:06.424641 run patchelf(pid=12971): Terminated: ok {rc=0} 00:44:06.457824 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=12968): Process ended prematurely: osmo-stp_10.42.42.5(pid=12968) [trial-2384↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12968)] [trial-2384↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping.py:22] 00:44:06.467329 tst ping.py:22: Test FAILED (6.8 sec) 00:44:06.531460 run osmo-hlr_10.42.42.2(pid=12965): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12965)] 00:44:06.583612 run osmo-hlr_10.42.42.2(pid=12965): stdout: | (launched: 2022-12-13_00:44:03.104600) 00:44:06.636327 run osmo-hlr_10.42.42.2(pid=12965): stderr: | �[0;m�[1;31m20221213004403299 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213004403299 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213004403299 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213004403300 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213004403300 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213004403300 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213004403312 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213004403321 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213004403321 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213004403321 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:44:06.681290 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12964): Terminating (SIGTERM) 00:44:06.723521 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12967): Terminating (SIGTERM) 00:44:06.765996 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12970): Terminating (SIGTERM) 00:44:06.776286 --- ParallelTerminationStrategy: PID 12964 died... 00:44:06.833059 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12964): Terminated: ok {rc=0} 00:44:06.843444 --- ParallelTerminationStrategy: PID 12967 died... 00:44:06.899940 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12967): Terminated: ok {rc=0} 00:44:06.910163 --- ParallelTerminationStrategy: PID 12970 died... 00:44:06.966488 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12970): Terminated: ok {rc=0} 00:44:07.053208 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12968): Process ended prematurely: osmo-stp_10.42.42.5(pid=12968) [trial-2384↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12968)]