Failed
gprs:trx-b200.ping_idle_ping.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=11940): Process ended prematurely: osmo-stp_10.42.42.5(pid=11940) [trial-2384↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11940)]
Standard Output
---------------------------------------------- trial-2384 gprs:trx-b200 ping_idle_ping.py ---------------------------------------------- 00:33:05.691335 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 00:33:05.703249 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 00:33:05.850498 tst ping_idle_ping.py: using LAC 32393 00:33:05.977635 tst ping_idle_ping.py: using RAC 8 00:33:06.110391 tst ping_idle_ping.py: using CellId 32393 00:33:06.229806 tst ping_idle_ping.py: using BVCI 32394 00:33:06.252860 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 00:33:06.263713 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 00:33:06.274443 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 00:33:06.285651 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 00:33:06.296643 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 00:33:06.307761 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 00:33:06.318896 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 00:33:06.329939 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 00:33:06.621672 tst ping_idle_ping.py:24: start network... 00:33:06.755708 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:33:07.267779 run create_hlr_db(pid=11934): Launched 00:33:07.455483 bus /gobi_6: Setting Powered False 00:33:08.476338 run create_hlr_db(pid=11934): Terminated: ok {rc=0} 00:33:08.880271 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11936): Launched 00:33:09.180317 run osmo-hlr_10.42.42.2(pid=11937): Launched 00:33:09.298873 run osmo-stp_10.42.42.5: Starting osmo-stp 00:33:09.826506 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11939): Launched 00:33:10.125718 run osmo-stp_10.42.42.5(pid=11940): Launched 00:33:10.234432 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:33:10.760133 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11942): Launched 00:33:10.866893 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:33:11.129150 run patchelf(pid=11943): Launched 00:33:11.305829 run osmo-stp_10.42.42.5(pid=11940): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11940)] 00:33:11.434609 run osmo-stp_10.42.42.5(pid=11940): stdout: | (launched: 2022-12-13_00:33:09.978560) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:33:11.563822 run osmo-stp_10.42.42.5(pid=11940): stderr: | �[0;m�[38;5;43m20221213003310144 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213003310144 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213003310144 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213003310145 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213003310145 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213003310145 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213003310145 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:33:11.688190 run osmo-stp_10.42.42.5(pid=11940): stdout: | (launched: 2022-12-13_00:33:09.978560) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:33:11.812557 run osmo-stp_10.42.42.5(pid=11940): stderr: | �[0;m�[38;5;43m20221213003310144 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213003310144 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213003310144 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213003310145 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213003310145 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213003310145 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213003310145 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:33:11.957093 run patchelf(pid=11943): Terminating (SIGINT) 00:33:12.127279 run patchelf(pid=11943): Terminated: ok {rc=0} 00:33:12.157976 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=11940): Process ended prematurely: osmo-stp_10.42.42.5(pid=11940) [trial-2384↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11940)] [trial-2384↪gprs:trx-b200↪ping_idle_ping.py:27] 00:33:12.166627 tst ping_idle_ping.py:27: Test FAILED (6.5 sec) 00:33:12.226558 run osmo-hlr_10.42.42.2(pid=11937): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:trx-b200↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11937)] 00:33:12.275595 run osmo-hlr_10.42.42.2(pid=11937): stdout: | (launched: 2022-12-13_00:33:09.032909) 00:33:12.325342 run osmo-hlr_10.42.42.2(pid=11937): stderr: | �[0;m�[1;31m20221213003309205 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213003309205 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213003309205 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213003309205 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213003309205 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213003309205 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213003309218 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:trx-b200/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213003309229 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213003309229 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213003309229 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:33:12.367492 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11936): Terminating (SIGTERM) 00:33:12.407721 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11939): Terminating (SIGTERM) 00:33:12.448102 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11942): Terminating (SIGTERM) 00:33:12.457679 --- ParallelTerminationStrategy: PID 11936 died... 00:33:12.511441 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11936): Terminated: ok {rc=0} 00:33:12.521283 --- ParallelTerminationStrategy: PID 11939 died... 00:33:12.574675 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11939): Terminated: ok {rc=0} 00:33:12.584635 --- ParallelTerminationStrategy: PID 11942 died... 00:33:12.637902 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11942): Terminated: ok {rc=0} 00:33:12.726909 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11940): Process ended prematurely: osmo-stp_10.42.42.5(pid=11940) [trial-2384↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11940)]