Failed
gprs:nanobts+band-1900+mod-bts0-dynts-ipa.iperf3.py (from gprs_nanobts+band-1900+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=553): Process ended prematurely: osmo-stp_10.42.42.5(pid=553) [trial-2387↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=553)]
Standard Output
---------------------------------------------- trial-2387 gprs:nanobts+band-1900+mod-bts0-dynts-ipa iperf3.py ---------------------------------------------- 09:37:53.690382 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:37:53.702019 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 09:37:53.851451 tst iperf3.py: using LAC 33079 09:37:53.969685 tst iperf3.py: using RAC 184 09:37:54.098236 tst iperf3.py: using CellId 33079 09:37:54.221219 tst iperf3.py: using BVCI 33080 09:37:54.245738 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:37:54.257433 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:37:54.269097 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:37:54.280464 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:37:54.291855 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:37:54.303265 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:37:54.314943 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:37:54.326218 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:37:54.337717 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 09:37:54.613926 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 09:37:54.738123 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:37:55.046356 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=545): Launched 09:37:55.303566 run iperf3-srv_10.42.42.10(pid=546): Launched 09:37:55.485153 tst iperf3.py:8: start network... 09:37:55.609514 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:37:56.077682 run create_hlr_db(pid=547): Launched 09:37:56.248447 bus /gobi_6: Setting Powered False 09:37:57.270213 run create_hlr_db(pid=547): Terminated: ok {rc=0} 09:37:57.690818 run pcap-recorder_any(filters='host 10.42.42.2')(pid=549): Launched 09:37:58.008161 run osmo-hlr_10.42.42.2(pid=550): Launched 09:37:58.125806 run osmo-stp_10.42.42.5: Starting osmo-stp 09:37:58.678611 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=552): Launched 09:37:58.996677 run osmo-stp_10.42.42.5(pid=553): Launched 09:37:59.112086 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:37:59.665786 run pcap-recorder_any(filters='host 10.42.42.6')(pid=555): Launched 09:37:59.779132 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:38:00.055069 run patchelf(pid=556): Launched 09:38:00.241631 run osmo-stp_10.42.42.5(pid=553): ERR: Terminated: ERROR {rc=1} [trial-2387↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=553)] 09:38:00.377603 run osmo-stp_10.42.42.5(pid=553): stdout: | (launched: 2022-12-13_09:37:58.840703) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:38:00.514056 run osmo-stp_10.42.42.5(pid=553): stderr: | �[0;m�[38;5;43m20221213093759032 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213093759032 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213093759032 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213093759033 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213093759033 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213093759033 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213093759033 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:38:00.646091 run osmo-stp_10.42.42.5(pid=553): stdout: | (launched: 2022-12-13_09:37:58.840703) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:38:00.776816 run osmo-stp_10.42.42.5(pid=553): stderr: | �[0;m�[38;5;43m20221213093759032 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213093759032 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213093759032 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213093759033 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213093759033 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213093759033 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213093759033 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:38:00.929054 run patchelf(pid=556): Terminating (SIGINT) 09:38:01.102320 run patchelf(pid=556): Terminated: ok {rc=0} 09:38:01.135458 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=553): Process ended prematurely: osmo-stp_10.42.42.5(pid=553) [trial-2387↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=553)] [trial-2387↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8] 09:38:01.145794 tst iperf3.py:8: Test FAILED (7.5 sec) 09:38:01.210074 run osmo-hlr_10.42.42.2(pid=550): ERR: Terminated: ERROR {rc=237} [trial-2387↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=550)] 09:38:01.261207 run osmo-hlr_10.42.42.2(pid=550): stdout: | (launched: 2022-12-13_09:37:57.852737) 09:38:01.313435 run osmo-hlr_10.42.42.2(pid=550): stderr: | �[0;m�[1;31m20221213093758051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213093758051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213093758051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213093758051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213093758051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213093758051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213093758064 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2387/run.2022-12-13_08-32-52/gprs:nanobts+band-1900+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213093758072 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213093758072 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213093758072 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:38:01.359436 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=545): Terminating (SIGTERM) 09:38:01.403399 run iperf3-srv_10.42.42.10(pid=546): Terminating (SIGTERM) 09:38:01.445657 run pcap-recorder_any(filters='host 10.42.42.2')(pid=549): Terminating (SIGTERM) 09:38:01.488270 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=552): Terminating (SIGTERM) 09:38:01.534857 run pcap-recorder_any(filters='host 10.42.42.6')(pid=555): Terminating (SIGTERM) 09:38:01.545252 --- ParallelTerminationStrategy: PID 545 died... 09:38:01.604826 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=545): Terminated: ok {rc=0} 09:38:01.615363 --- ParallelTerminationStrategy: PID 546 died... 09:38:01.672654 run iperf3-srv_10.42.42.10(pid=546): Terminated {rc=256} 09:38:01.683208 --- ParallelTerminationStrategy: PID 549 died... 09:38:01.740341 run pcap-recorder_any(filters='host 10.42.42.2')(pid=549): Terminated: ok {rc=0} 09:38:01.750799 --- ParallelTerminationStrategy: PID 552 died... 09:38:01.807118 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=552): Terminated: ok {rc=0} 09:38:01.817645 --- ParallelTerminationStrategy: PID 555 died... 09:38:01.874262 run pcap-recorder_any(filters='host 10.42.42.6')(pid=555): Terminated: ok {rc=0} 09:38:01.963699 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=553): Process ended prematurely: osmo-stp_10.42.42.5(pid=553) [trial-2387↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=553)]